Boosting the Efficiency of Urea Synthesis Via Cooperative Electroreduction of N2 and CO2 on MoP

Dongxu Jiao

DOI: https://doi.org/10.1039/d2ta07531h

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:By combining theoretical and experimental efforts, we designed the MoP-(101) surface and explored its potential as catalyst for urea production.

What problem does this paper attempt to address?

Boosting the Efficient Urea Synthesis via Cooperative Electroreduction of N2 and CO2 on MoP

Dongxu Jiao,Yilong Dong,Xiaoqiang Cui,Qinghai Cai,Zhongfang Chen,Carlos Cabrera-Martinez,Jing-Xiang Zhao

DOI: https://doi.org/10.1039/d2ta07531h

IF: 11.9

2022-11-18

Journal of Materials Chemistry A

Abstract:By joint theoretical and experimental efforts, we designed the MoP-(101) surface, and explored its potential as catalysts for urea production. Our computations revealed that N2 and CO2 reactants can be effectively reduced into urea product on MoP-(101) surface with a low limiting potential (-0.27 V), the competitive side reactions can be well suppressed, and the *NHCONH species is a key reaction intermediate for the CN coupling during urea synthesis. Our experimental measurements confirmed the above theoretical predictions: urea synthesis was achieved with the urea formation rate of 12.4 μg h-1 mg-1 and the Faradaic efficiency of 36.5%. This work not only highlights the critical role of the abundant Mo active sites for urea electrosynthesis, but also provides a new mechanism for the C-N coupling, which may be used to further develop other efficient electrocatalysts.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Modulation of surface properties on cobalt phosphide for high-performance ambient ammonia electrosynthesis

Qiangguo Meng,Yunpeng Hou,Fangqi Yang,Chenliang Cao,Zhi Zou,Junhui Luo,Weizhen Zhou,Zhikun Tong,Shixia Chen,Shaodong Zhou,Jun Wang,Shuguang Deng

DOI: https://doi.org/10.1016/j.apcatb.2021.120874

2022-01-01

Abstract:Tuning surface properties of electrocatalysts for sustainable electrocatalytic nitrogen reduction reaction (NRR) with high selectivity and activity is highly demanded but still lacks fundamental understanding and modulation methods. Herein, we report the transformation of hydrogen evolution reaction (HER)-favorable cobalt phosphide (CoP) to NRR-favorable electrocatalyst via modulation of surface properties. The oxidized CoP particles encapsulated in carbon nanotubes (O-CoP/CNT) exhibits a high NH3 yield of 39.58 mu g h(-1) mg(-1 cat) as well as high Faradaic efficiency (FE) of 19.4% at -0.5 V vs. reversible hydrogen electrode (RHE), which is confirmed by N-15(2) isotope-labeling tests. In-situ Raman spectra identify that N-2 molecules are preferentially captured by Co ions, while the surface-adsorbed H+ are gradually eliminated. The hydrophobic surface of CNT can limit the contact of protons with the catalyst surface to inhibit HER, and the formation of hydrogen bond facilitates a more efficient NRR process. The surface modulation effects are confirmed by density functional theory calculations.
Atomic Modulation and Phase Engineering of MoS2 for Boosting N2 Reduction

Yansong Jia,Guining Shao,Li Yang,Ruizhe Yang,Ming Huang,Hua Huang,Min Liu,Gai Huang,Qunjie Lu,Chaohua Gu

DOI: https://doi.org/10.20517/microstructures.2023.95

2024-01-01

Microstructures

Abstract:Electrochemical nitrogen reduction reaction (ENRR) has emerged as a potential alternative to the conventional Haber-Bosch process for ammonia production. However, ENRR technology is still restricted by the limited Faradaic efficiency due to the hard-to-break N-N triple bond. Herein, inspired by the biomimetic catalyst, we developed a Fe-modulated MoS2 catalyst (named Fe@MoS2) as an efficient ENRR catalyst. Raman spectra, coupled with the X-ray absorption spectroscopy, demonstrate the introduction of Fe into the MoS2 lattice and achieve partial 2H to 1T phase conversion. The presence of S-vacancies on MoS2 substrates was observed on scanning transmission electron microscopy images. Operando infrared absorption spectroscopy confirms that the constructed catalytic site significantly reduces barriers to nitrogen activation. The synthesized Fe@MoS2, with its superior geometric and electronic structures, exhibits a remarkable Faradaic efficiency of 19.7 ± 5.5% at -0.2 V vs. Reversible Hydrogen Electrode and a high yield rate of 20.2 ± 5.3 μg h-1 mg-1 at -0.8 V vs. Reversible Hydrogen Electrode. Therefore, this work provides a fresh direction for designing novel catalysts, eventually boosting the nitrogen reduction reaction kinetics and accelerating the ENRR application.
Mo2P Monolayer as a Superior Electrocatalyst for Urea Synthesis from Nitrogen and Carbon Dioxide Fixation: A Computational Study

Dongxu Jiao,Zhongxu Wang,Yuejie Liu,Qinghai Cai,Jingxiang Zhao,Carlos R. Cabrera,Zhongfang Chen

DOI: https://doi.org/10.1002/eem2.12496

2022-08-30

Abstract:Urea synthesis through the simultaneous electrocatalytic reduction of N2 and CO2 molecules under ambient conditions holds great promises as a sustainable alternative to its industrial production, in which the development of stable, highly efficient, and highly selective catalysts to boost the chemisorption, activation, and coupling of inert N2 and CO2 molecules remains rather challenging. Herein, by means of density functional theory (DFT) computations, we proposed a new class of 2D nanomaterials, namely, transition‐metal phosphide monolayers (TM2P, TM = Ti, Fe, Zr, Mo, and W), as the potential electrocatalysts for urea production. Our results showed that these TM2P materials exhibit outstanding stability and excellent metallic properties. Interestingly, the Mo2P monolayer was screened out as the best catalyst for urea synthesis due to its small kinetic energy barrier (0.35 eV) for C‐N coupling, low limiting potential (‐0.39 V), and significant suppressing effects on the competing side reactions. The outstanding catalytic activity of the Mo2P monolayer can be ascribed to its optimal adsorption strength with the key *NCON species due to its moderate positive charges on the Mo active sites. Our findings not only propose a novel catalyst with high‐efficiency and high‐selectivity for urea production but also further widen the potential applications of metal phosphides in electrocatalysis.

materials science, multidisciplinary
Tandem Catalysts Enabling Efficient C‐N Coupling toward the Electrosynthesis of Urea

Yuhang Gao,Jingnan Wang,Menglong Sun,Yuan Jing,Lili Chen,Zhiqin Liang,Yijun Yang,Chuang Zhang,Jiannian Yao,Xi Wang

DOI: https://doi.org/10.1002/anie.202402215

2024-04-06

Angewandte Chemie International Edition

Abstract:The development of a methodology for synthesizing value-added urea (CO(NH2)2) via a renewable electricity-driven C-N coupling reaction under mild conditions is highly anticipated. However, the complex catalytic active sites that act on the carbon and nitrogen species make the reaction mechanism unclear, resulting in a low efficiency of C-N coupling from the co-reduction of carbon dioxide (CO2) and nitrate (NO3-). Herein,we propose a novel tandem catalyst of Mo-PCN-222(Co), in which the Mo sites serve to facilitate nitrate reduction to the *NH2 intermediate, while the Co sites enhance CO2 reduction to carbonic oxide (CO), thus synergistically promoting C-N coupling. The synthesized Mo-PCN-222(Co) catalyst exhibited a noteworthy urea yield rate of 844.11mg h−1 g−1, alongside a corresponding Faradaic efficiency of 33.90% at −0.4 V vs. reversible hydrogen electrode (RHE). By combining in situ spectroscopic techniques with density functional theory calculations, we demonstrate that efficient C-N coupling is attributed to a tandem system in which the *NH2 and *CO intermediates produced by the Mo and Co active sites of Mo-PCN-222(Co) stabilize the formation of the *CONH2 intermediate. This study provides an effective avenue for the design and synthesis of tandem catalysts for electrocatalytic urea synthesis.

chemistry, multidisciplinary
Efficient urea synthesis via one-step N–C–N coupling: strong metal–support interaction-driven planar Cu clusters on two-dimensional Mo2C MXene

Yue Zhang,Linguo Lu,Tiantian Zhao,Jingxiang Zhao,Qinghai Cai,Zhongfang Chen

DOI: https://doi.org/10.1039/d4ta02393e

IF: 11.9

2024-06-12

Journal of Materials Chemistry A

Abstract:The electrocatalytic co-reduction of small carbonaceous and nitrogenous molecules recently emerged as a promising strategy to mitigate carbon emissions, facilitate wastewater denitrification, and sustain urea synthesis. However, the development of highly efficient electrocatalysts to accelerate C–N coupling and multiple protonation steps remains challenging. Herein, inspired by the "strong metal–support interaction" (SMSI) concept, we designed novel catalysts, comprised of size-selected Cu clusters anchored on the two-dimensional molybdenum carbide MXene (Cu n /Mo 2 C), for urea production via the co-reduction of nitrate (NO 3 − ) and carbon dioxide (CO 2 ). Our density functional theory (DFT) computations revealed that these Cu clusters are strongly immobilized on the Mo 2 C substrate by forming planar structures, leading to considerable active sites. Notably, these Cu n /Mo 2 C catalysts demonstrate enhanced activity for urea synthesis through a one-step N–C–N coupling mechanism. This process involves the insertion of CO * into the intermediate, facilitated by electrostatic attractions between their nitrogen atoms. In particular, among the catalysts tested, Cu 4 /Mo 2 C exhibits superior performance, achieving urea production with a limiting potential of −0.36 V. Furthermore, the competing side reactions, such as CO reduction or release, NH 3 production, hydrogen evolution, and surface oxidation, are significantly suppressed, ensuring its high selectivity for urea synthesis. This work not only introduces a novel method for urea electro-synthesis via SMSI between metal clusters and substrate, but also suggests a strategy for synthesizing other organonitrogen compounds.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Theoretical Study on the Synthesis of Urea by Electrochemical Nitrate and Carbon Dioxide over COF Series Catalysts

Yingjun Hou,Ling Guo

DOI: https://doi.org/10.1007/s10563-023-09408-9

2023-10-31

Catalysis Surveys from Asia

Abstract:Catalytic synthesis of urea is a bright substitutable to Haber–Bosch progression and industrial urea synthesis. Electrochemical C–N coupling of carbon dioxide and nitrogen oxides under environmental conditions is a newly developed method, which also provides a novel opinion for solving nitrate contamination. Conjugated organic frameworks (COFs) have been used as prospective electrocatalysts for nitrogen reduction reactions and carbon dioxide reduction reactions (CO2RR) as a result of their regulate structure and multihole properties, resulting in efficient electron transfer. This paper reports the efficient synthesis of urea from carbon dioxide and nitrate over MoM1S-Pc-M2PPs COF (M as a transition metal) electrocatalyst. According to the calculation of DFT, it was found that it was difficult for carbon dioxide and nitrogen oxide to coadsorb on MoM1S-Pc to synthesize urea, so we chose to synthesize CO on the metal porphyrin (M2PPs) structural unit, and then overflow on the bimetallic phthalocyanine and nitrogen oxide to synthesize urea. The possibility of nitrate adsorption on different catalysts was verified by calculation. We screened the stability, nitrate adsorption strength, and catalytic activity of MoM1S-Pc candidates, and the results showed that the most promising candidate catalyst was MoFeS-Pc. At the same time, the CO2RR M2PPs substrate was also screened, and the VPPs structure was selected as the best. In the study of coupling between different nitrogen-containing intermediates and *CO, the C–N coupling mechanism shows that *NOH and *CO are two possible C–N coupling nitrogen intermediates, which are shown to be thermodynamically spontaneous and have an inferior activation barrier. This study not only provisions novel perceptions into urea synthesis by coupling nitrogen oxides with carbon dioxide under environmental conditions, but also paves the way for boosting the sustainable production of carbon and nitrogen-coupled products.

chemistry, physical
Surface Engineering over Metal–Organic Framework Nanoarray to Realize Boosted and Sustained Urea Oxidation

Ping Li,Wenqin Li,Yuqi Huang,Quhua Huang,Fengli Li,Shuanghong Tian

DOI: https://doi.org/10.1002/smll.202305585

IF: 13.3

2023-08-15

Small

Abstract:A novel interfacial coordination assembly methodology is proposed to modify the cross‐linked Co‐phytate coordination complex on the surface of a Ni‐BDC nanosheet array. The resultant CC/Ni‐BDC@Co‐PA presents prominently boosted and sustained urea oxidation reaction electrocatalysis. The fundamental mechanisms are illuminated by combination of experimental investigations and theoretical calculations. Facilitating C─N bond cleavage and promoting *COO desorption are essential yet challenging in urea oxidation reactions (UORs). Herein a novel interfacial coordination assembly protocol is established to modify the Co‐phytate coordination complex on the Ni‐based metal–organic framework (MOF) nanosheet array (CC/Ni‐BDC@Co‐PA) toward boosted and sustained UOR electrocatalysis. Comprehensive experimental and theoretical investigations unveil that surface Co‐PA modification over Ni‐BDC can manipulate the electronic state of Ni sites, and in situ evolved charge‐redistributed surface can promote urea adsorption and the subsequent C─N bond cleavage. Impressively, Co‐PA functionalization can impart a negatively charged catalyst surface with improved aerophobicity, not only weakening *COO adsorption and promoting CO2 departure, but also repelling CO32− approaching to deactivate Ni species, eventually alleviating CO2 poisoning and enhancing operational durability. Beyond that, improved hydrophilic and aerophobic characteristics would also contribute to better mass transfer kinetics. Consequently, CC/Ni‐BDC@Co‐PA exhibits prominent UOR performance with an ultralow potential of 1.300 V versus RHE to attain 10 mA cm−2, a small Tafel slope of 45 mV dec−1, and strong durability, comparable to the best Ni‐based electrocatalysts documented thus far. This work affords a novel paradigm to construct MOF‐based materials for promoted and sustained UOR catalysis through elegant surface engineering based on a metal‐PA complex.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Electrochemical C‐N Coupling on Tri‐metallic Mo‐doped Graphdiyne towards Efficient Urea Synthesis

Mingzhu Jin,Shuang Wu,Aijun Du,Jianfen Fan,Qiao Sun

DOI: https://doi.org/10.1002/cctc.202300836

IF: 4.5

2023-09-07

ChemCatChem

Abstract:Synthesis of urea by electrochemical C‐N coupling is a promising alternative to the conventional approaches. A metal‐cluster catalyst generally possesses multi‐atom active sites and can achieve co‐adsorption and activation of several species. As a two‐dimensional porous material, graphdiyne (GDY) is predicated to be a good substrate for metal‐cluster doping. In this study, tri‐metallic Mo‐doped graphdiyne (Mo3@GDY) stands out for efficient urea synthesis among several TM3@GDY (TM=Mo, Fe, Co, Ni and Cu), based on density functional theory (DFT) computations. The co‐adsorption of side‐on N2 and end‐on CO on Mo3@GDY is benefit to the formation of the urea precursor *NCON with a negative free energy change (‐0.66 eV). The final hydrogenation step is the potential‐determining step (PDS) with a medium onset potential (‐0.71 eV). This work extends the application of GDY and first provides a new approach for the electrochemical synthesis of urea by doping tri‐metallic atoms in GDY.

chemistry, physical
Boosting Electroreduction of Nitrate and CO2 to Urea on a Tandem Fe1/MoS2 Catalyst

Wenyu Du,Zeyi Sun,Shiyao Shang,Kai Chen,Xing Yang,Ke Chu

DOI: https://doi.org/10.1021/acsnano.4c10187

IF: 17.1

2024-10-08

ACS Nano

Abstract:Urea electrosynthesis by coelectrolysis of NO3- and CO2 (UENC) holds enormous promise for sustainable urea production, while the efficient UENC process relies on the rational design of high-performance catalysts to facilitate the electrocatalytic C-N coupling efficiency and the hydrogenation reaction process. Herein, Fe single atoms supported on MoS2 (Fe1/MoS2) are developed as a highly effective and robust catalyst for UENC. Theoretical calculations and operando spectroscopic measurements reveal a tandem catalysis mechanism of the Fe1-S3 motif and MoS2-edge to jointly promote the UENC process, where the Fe1-S3 motif drives the early C-N coupling and subsequent *CO2NO2-to-*CO2NH2 step. The generated *CO2NH2 is then migrated from the Fe1-S3 motif to the nearby MoS2-edge, which facilitates the *CO2NH2 → *COOHNH2 step for urea formation. Noticeably, Fe1/MoS2 assembled in a flow cell reaches a maximum urea Faraday efficiency of 54.98% with a corresponding urea yield rate of 18.98 mmol h-1 g-1, performing at the top level among all of the UENC catalysts reported to date.
Cu-Mo Dual Sites in Cu-Doped MoSe2 for Enhanced Electrosynthesis of Urea

Jiadi Jiang,Guanzheng Wu,Mengmiao Sun,Yi Liu,Yidong Yang,Aijun Du,Lei Dai,Xin Mao,Qing Qin

DOI: https://doi.org/10.1021/acsnano.4c01821

IF: 17.1

2024-05-28

ACS Nano

Abstract:The quest for sustainable urea production has directed attention toward electrocatalytic methods that bypass the energy-intensive traditional Haber-Bosch process. This study introduces an approach to urea synthesis through the coreduction of CO2 and NO3- using copper-doped molybdenum diselenide (Cu-MoSe2) with Cu-Mo dual sites as electrocatalysts. The electrocatalytic activity of the Cu-MoSe2 electrode is characterized by a urea yield rate of 1235 μg h-1 mgcat.-1 at -0.7 V versus the reversible hydrogen electrode and a maximum Faradaic efficiency of 23.43% at -0.6 V versus RHE. Besides, a continuous urea production with an enhanced average yield rate of 9145 μg h-1 mgcat.-1 can be achieved in a flow cell. These figures represent a substantial advancement over that of the baseline MoSe2 electrode. Density functional theory (DFT) calculations elucidate that Cu doping accelerates *NO2 deoxygenation and significantly decreases the energy barriers for C-N bond formation. Consequently, Cu-MoSe2 demonstrates a more favorable pathway for urea production, enhancing both the efficiency and feasibility of the process. This study offers valuable insights into electrode design and understanding of the facilitated electrochemical pathways.
Boosting Mass Exchange between Pd/NC and MoC/NC Dual Junctions via Electron Exchange for Cascade CO 2 Fixation

Dong Xu,Xiu Lin,Qi-Yuan Li,Shi-Nan Zhang,Si-Yuan Xia,Guang-Yao Zhai,Jie-Sheng Chen,Xin-Hao Li

DOI: https://doi.org/10.1021/jacs.1c12986

IF: 15

2022-03-01

Journal of the American Chemical Society

Abstract:Merging existing catalysts together as a cascade catalyst may achieve "one-pot" synthesis of complex but functional molecules by simplifying multistep reactions, which is the blueprint of sustainable chemistry with low pollutant emission and consumption of energy and materials only when the smooth mass exchange between different catalysts is ensured. Effective strategies to facilitate the mass exchange between different active centers, which may dominate the final activity of various cascade catalysts, have not been reached until now, even though charged interfaces due to work function driven electron exchange have been widely observed. Here, we successfully constructed mass (reactants and intermediates) exchange paths between Pd/N-doped carbon and MoC/N-doped carbon induced by interfacial electron exchange to trigger the mild and cascade methylation of amines using CO2 and H2. Theoretical and experimental results have demonstrated that the mass exchange between electron-rich MoC and electron-deficient Pd could prominently improve the production of N,N-dimethyl tertiary amine, which results in a remarkably high turnover frequency value under mild conditions, outperforming the state-of-the-art catalysts in the literature by a factor of 5.9.

chemistry, multidisciplinary
Unveiling the key intermediates in electrocatalytic synthesis of urea with CO2 and N2 coupling reactions on double transition-metal MXenes

Yufei Yang,Jiahe Peng,Zuhao Shi,Peng Zhang,Arramel Arramel,Neng Li

DOI: https://doi.org/10.1039/d2ta09477k

IF: 11.9

2023-03-07

Journal of Materials Chemistry A

Abstract:The direct electrocatalytic synthesis of urea from nitrogen (N 2 ) and carbon dioxide (CO 2 ) under mild conditions is of great significance in promoting energy and environmental strategies. However, the current strategy operated under mild conditions suffers from many technical bottlenecks, such as a complex synthesis process, high overpotential of an electrocatalytic synthesis reaction, low conversion efficiency, and poor product selectivity. Therefore, it is important to design high-performance electrocatalysts for urea synthesis with an efficient mechanism. In this work, we present a double transition-metal MXene (Mo 2 VC 2 -MXene) as an excellent candidate with high selectivity for the electrocatalytic synthesis of urea under mild conditions. The key intermediate precursor *CO is unraveled through full reaction energy calculations by taking into account the related reaction pathways. Transition state assessments were also performed for the C–N coupling step and resulted in the targeted kinetic potentials, which are lower potential barriers than that of the Pd–Cu catalyst (0.79 eV). The selectivity performance of the Mo 2 VC 2 surface is demonstrated in the electrocatalytic synthesis of urea for the first time. This work consolidates the fundamental theoretical approach for the promising electrocatalytic synthesis of urea. Furthermore, the effort highlights the importance of newly emerged MXenes towards highly efficient electrocatalytic synthesis of urea.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Synergistic Cu Single Atoms and MoS2‐Edges for Tandem Electrocatalytic Reduction of NO3− and CO2 to Urea

Wenyu Du,Zeyi Sun,Kai Chen,Yichen Wei,Rui Bao,Ke Chu

DOI: https://doi.org/10.1002/aenm.202401765

IF: 27.8

2024-08-19

Advanced Energy Materials

Abstract:Cu single atoms on MoS2 (Cu1‐MoS2) is explored as a highly active and selective catalyst towards the urea electrosynthesis from co‐electrolysis of NO3‐ and CO2 (UENC), arising from the synergistic effect of Cu1 site and MoS2‐edge active sites to promote the UENC via tandem catalysis. Urea electrosynthesis from co‐electrolysis of NO3− and CO2 (UENC) under ambient conditions is recognized as an appealing approach for effective and sustainable urea production, while it requires high‐efficiency UENC electrocatalysts to promote the C─N coupling and hydrogenation processes. Herein, single‐atom Cu anchored on MoS2 (Cu1‐MoS2) is explored as a highly active and selective UENC catalyst. Theoretical calculations and operando spectroscopic characterizations unveil the synergistic tandem catalysis of Cu1‐MoS2 for the UENC, where Cu single atoms trigger the early C─N coupling, while MoS2‐edges promote the key hydrogenation step of *CO2NH2 to *COOHNH2 for urea generation. Strikingly, Cu1‐MoS2 equipped in a flow cell achieves the excellent UENC performance with a maximum urea‐Faradaic efficiency of 57.02% at −0.6 V and the corresponding urea yield rate of 23.3 mmol h−1 g−1, surpassing nearly all previously reported UENC catalysts.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Rectifying Heterointerface Facilitated C‐N Coupling Dynamics Enables Efficient Urea Electrosynthesis Under Ultralow Potentials

Mingyu Cheng,Shao Wang,Zechuan Dai,Jing Xia,Bocheng Zhang,Pingyi Feng,Yin Zhu,Yangyang Zhang,Genqiang Zhang

DOI: https://doi.org/10.1002/anie.202413534

2024-09-26

Angewandte Chemie International Edition

Abstract:Electrocatalytic C-N coupling for urea synthesis from carbon dioxide (CO2) and nitrate (NO3-) offers a sustainable alternative to the traditional Bosch-Meiser method. However, the complexity of intermediates in co-reduction hampers simultaneous improvement in urea yield and Faradaic efficiency (FE). Herein, we developed a Cu/Cu2O Mott-Schottky catalyst with nanoscale rectifying heterointerfaces through precise controllable in-situ electroreduction of Cu2O nanowires, achieving notable FE (32.6-47.0%) and substantial yields (6.08-30.4 μmol h-1 cm-2) across a broad range of ultralow applied potentials (0 to -0.3 V vs. RHE). Operando synchrotron radiation-Fourier transform infrared spectroscopy (SR-FTIR) confirmed the formation of *CO intermediates and C-N bonds, subsequently density functional theory (DFT) calculations deciphered that the Cu/Cu2O rectifying heterointerface modulated *CO adsorption, significantly enhancing subsequent C-N coupling dynamics between *CO and *NOH intermediates. This work not only provides a groundbreaking and advanced pathway for C-N coupling, but also offers deep insights into copper-based heterointerface catalysts for urea synthesis.

chemistry, multidisciplinary
Boosting urea-assisted water splitting over P-MoO2@CoNiP through Mo leaching/reabsorption coupling CoNiP reconstruction

Xue Yang,Hongkai Bu,Ruiwen Qi,Lin Ye,Min Song,Zhipeng Chen,Fei Ma,Chao Wang,Lingbo Zong,Hongtao Gao,Tianrong Zhan

DOI: https://doi.org/10.1016/j.jcis.2024.07.142

2024-12-15

Abstract:Combining the urea oxidation reaction (UOR) with the hydrogen evolution reaction (HER) is an effective technology for energy-saving hydrogen production. Herein, a bifunctional electrocatalyst with CoNiP nanosheet coating on P-doped MoO2 nanorods (P-MoO2@CoNiP) is obtained via a two-step hydrothermal followed a phosphorization process. The catalyst demonstrates exceptional alkaline HER performance due to the formation of MoO2 and the dissolution/absorption of Mo. Meanwhile, the inclusion of Co and P in the P-MoO2@CoNiP catalyst facilitated the formation of NiOOH, enhancing UOR performance. Density functional theory calculations reveal that the hydrogen adsorption Gibbs free energy (ΔGH*) of P-MoO2@CoNiP is closer to 0 eV than CoNiP, favoring the HER. The catalyst only needs -0.08 and 1.38 V to reach 100 mA cm-2 for catalyzing the HER and UOR, respectively. The full urea electrolysis system driven by P-MoO2@CoNiP requires 1.51 V to achieve 100 mA cm-2, 120 mV lower than the traditional water electrolysis.
The asymmetric orbital hybridization in single-atom-dimers for urea synthesis by optimizing the C-N coupling reaction pathway

Chongchong Liu,Haili Tong,Peifang Wang,Rong Huang,Peilin Huang,Gang Zhou,Lizhe Liu

DOI: https://doi.org/10.1016/j.apcatb.2023.122917

2023-01-01

Abstract:Electrocatalytic reduction from nitrate (NO3-) and carbon dioxide (CO2) parades great prospects in substituting traditional process for urea synthesis, but challenges remain due to the arduous C-N coupling and multistage protonation. Unlike common design strategies, our study utilized synergistic effect between asymmetrical sites to reduce coupling barrier and promote urea production. Herein, we anchor dual single-atom Ru and Co on N-doped carbon for fixing the C/N group respectively and minimizing the generation energy for intermediates. As a result, the CoRuN6 electrocatalyst successfully restricts the parrel reaction (CO2/NO3-reduction) and affords a urea yield of 8.98 mmol h- 1g- 1 and a faradic efficiency (FE) of 25.31% at -0.6 V versus RHE. Our research provides novel insights into capitalizing on spatial regulation of active sites for efficient urea electrosynthesis.
Boosting Urea Synthesis in Simulated Flue Gas Electroreduction by Adjusting W-W Electronic Properties

Xiao-Hui Yao,Changyan Zhu,Jie Zhou,Kunhao Zhang,Chun-Yi Sun,Man Dong,Guo-Gang Shan,zhuo wu,Min Zhang,Xinlong Wang,Zhong-Min Su

DOI: https://doi.org/10.1039/d4gc02536a

IF: 9.8

2024-06-08

Green Chemistry

Abstract:The development of electrocatalysts that convert CO2 and N2 in flue gas into directly usable urea could not only explore the hidden value of exhaust gas but alleviate the global environmental issues caused by excessive CO2 emissions, yet, related researches are still in its infancy. Herein, multi-porous Cu-W18O49@ZIF-8, composed of ultra-small nanosized ZIF-8 on Cu-doped W18O49 nanowires, is fabricated as urea-generation electrocatalysts in flue gas. It exhibits an appealing Faraday efficiency of urea up to 16.1% at -0.9 V (vs. RHE) and an outstanding yield of 1.33 mmol g-1 h-1 at -1.0 V (vs. RHE) under flue gas atmosphere. The catalytic performance is maintained in a wide range of N2: CO2 ratios. Theoretical calculations indicate that the doped copper regulates the electron density around the adjacent W-W, which facilitates N2 adsorption, partly suppresses the HER side reaction, and decreases the ΔG of the following multi-step hydrogenation after *CO insertion until urea production.

chemistry, multidisciplinary,green & sustainable science & technology
Unveiling Electrochemical Urea Synthesis by Co-Activation of CO2 and N2 with Mott-Schottky Heterostructure Catalysts.

Guangjin Zhang,Jingxian Zhang,Yiling Bai,Shuwei Li,Menglei Yuan,Hongyan He,Zhanjun Liu,Junwu Chen,Tongkun Zhao,Qin Wang

DOI: https://doi.org/10.1002/anie.202101275

2021-02-25

Angewandte Chemie

Abstract:Electrocatalytic C-N bond coupling to convert CO 2 and N 2 molecules into urea under ambient conditions is a promising alternative to harsh industrial processes. However, the adsorption and activation of inert gas molecules and then driving C-N coupling reaction is energetically challenging. Herein, a novel Mott-Schottky Bi-BiVO 4 heterostructures are designed and realize the remarkable urea yield rate of 5.91 mmol h -1 g -1 and Faradaic efficiency of 12.55% at -0.4 V vs. RHE. Comprehensive analysis confirms the emerged space-charge region in heterostructural interface not only facilitates the targeted adsorption and activation of CO 2 and N 2 molecules on generated the local nucleophilic and electrophilic region but also effectively suppresses CO poisoning and the formation of endothermic *NNH intermediate, which thus guarantees the exothermic coupling of *N=N* intermediates and generated CO via desired C-N coupling reaction to form urea precursor *NCON* intermediate. This work provides an encouraging inspiration to promote urea electrosynthesis by electrochemical C-N coupling reaction under ambient conditions.

Medicine,Engineering,Chemistry
Promoting Electrocatalytic Reduction of CO2 and Nitrate to Urea on N-Doped Porous Hollow Carbon Spheres

Wantao Gao,Qinyue Wu,Xinfei Fan,Na Lu,Yanming Liu,Xie Quan

DOI: https://doi.org/10.1021/acsami.4c09949

2024-09-25

Abstract:The electrocatalytic coreduction of CO2 and nitrate is a green method for urea synthesis, mitigating CO2 emission and nitrate contamination. However, its slow kinetics and high energy barrier result in a poor urea production performance. Herein, we reported N-doped porous hollow carbon spheres (N-PHCS) for promoting CO2 and nitrate conversion to urea via nanoconfinement and N-doping from both reaction kinetics and thermodynamics. A high urea yield of 12.0 mmol h-1 gcat-1 with Faradaic efficiency of 19.1% was achieved on N-PHCS at -1.0 V (vs Ag/AgCl), which was comparable to or even higher than those of metal-based electrocatalysts reported. The experimental and theoretical calculation results revealed that carbon spheres with an appropriate interior void and pore size were favorable for confining reactants and intermediates to accelerate urea production, while N-doping can reduce the energy barrier for urea synthesis. By regulating the microstructure and N doping of N-PHCS, it showed a superior performance for urea electrosynthesis. The energy favorable pathway for urea synthesis was through the C-N coupling reaction of *NO and *CO, and pyridinic N can reduce the reaction energy barrier.

Boosting the Efficiency of Urea Synthesis Via Cooperative Electroreduction of N2 and CO2 on MoP

Boosting the Efficient Urea Synthesis via Cooperative Electroreduction of N2 and CO2 on MoP

Modulation of surface properties on cobalt phosphide for high-performance ambient ammonia electrosynthesis

Atomic Modulation and Phase Engineering of MoS2 for Boosting N2 Reduction

Mo2P Monolayer as a Superior Electrocatalyst for Urea Synthesis from Nitrogen and Carbon Dioxide Fixation: A Computational Study

Tandem Catalysts Enabling Efficient C‐N Coupling toward the Electrosynthesis of Urea

Efficient urea synthesis via one-step N–C–N coupling: strong metal–support interaction-driven planar Cu clusters on two-dimensional Mo2C MXene

Theoretical Study on the Synthesis of Urea by Electrochemical Nitrate and Carbon Dioxide over COF Series Catalysts

Surface Engineering over Metal–Organic Framework Nanoarray to Realize Boosted and Sustained Urea Oxidation

Electrochemical C‐N Coupling on Tri‐metallic Mo‐doped Graphdiyne towards Efficient Urea Synthesis

Boosting Electroreduction of Nitrate and CO2 to Urea on a Tandem Fe1/MoS2 Catalyst

Cu-Mo Dual Sites in Cu-Doped MoSe2 for Enhanced Electrosynthesis of Urea

Boosting Mass Exchange between Pd/NC and MoC/NC Dual Junctions via Electron Exchange for Cascade CO 2 Fixation

Unveiling the key intermediates in electrocatalytic synthesis of urea with CO2 and N2 coupling reactions on double transition-metal MXenes

Synergistic Cu Single Atoms and MoS2‐Edges for Tandem Electrocatalytic Reduction of NO3− and CO2 to Urea

Rectifying Heterointerface Facilitated C‐N Coupling Dynamics Enables Efficient Urea Electrosynthesis Under Ultralow Potentials

Boosting urea-assisted water splitting over P-MoO2@CoNiP through Mo leaching/reabsorption coupling CoNiP reconstruction

The asymmetric orbital hybridization in single-atom-dimers for urea synthesis by optimizing the C-N coupling reaction pathway

Boosting Urea Synthesis in Simulated Flue Gas Electroreduction by Adjusting W-W Electronic Properties

Unveiling Electrochemical Urea Synthesis by Co-Activation of CO2 and N2 with Mott-Schottky Heterostructure Catalysts.

Promoting Electrocatalytic Reduction of CO2 and Nitrate to Urea on N-Doped Porous Hollow Carbon Spheres