Abstract:Current research in hypersonic wind tunnel aerodynamic testing predominantly focuses on small-scale and lightweight models, typically limited to scales of 4 m and weights under 1 ton. However, there's an emerging trend in the design of hypersonic vehicles towards larger scales and heavier loads, often surpassing 9 m in length and several tons in weight. This shift poses new challenges as there's a noticeable gap in research specifically addressing the aerodynamic testing needs of these larger-scale models. Firstly, this study aims to fill this gap by conducting an exhaustive analysis of the impact of the strain box-balance floating frame on aerodynamic force transmission characteristics. This analysis is crucial as it offers essential theoretical guidance for designing large-scale strain box-balances in pulse combustion wind tunnels. These designs are uniquely tailored to test large and heavy air-breathing hypersonic vehicles (AHVs), addressing a critical need in the field. Subsequently, this study developed an innovative large-scale strain box-balance, measuring 2.4 m, specifically devised for aerodynamically testing extensive AHVs. Finally, to validate the effectiveness of this new strain box-balance design, the study undertook a series of comprehensive tests. These included static calibration tests, floating frame stiffness tests, and wind tunnel tests. The results from these experiments were remarkable, demonstrating high sensitivity across each test channel of the box-balance. Specifically, the sensitivities were 1.308 kg/10μv in the drag force test channel, 1.464 kg/10μv in the lift force test channel, and 1.104 kg/10μv in the pitching moment test channel. Additionally, the hysteresis levels recorded were exceptionally low, at 0.489 %, 0.0649 %, and 0.0086 % respectively for each channel. These findings not only validate the technical efficacy of the large-scale strain box-balance but also mark a significant stride in hypersonic aerodynamic research, catering to the emergent requirements of larger, heavier hypersonic vehicle models.

Characterizing Vibrational Behavior of a Large Airship Based on Scaled Model Test and Analysis

Experimental Study on Dynamical Characteristics of Ship Lift System

Modal Characteristics of a Scaling Stratospheric Airship in Still Air

STATIC AND DYNAMIC MECHANICS ANALYSIS FOR A LARGE-SCALE RIGIDITY-FLEXIBILITY AIRSHIP STRUCTURE

Vibration Characteristic Analysis and Experiment of Non-Rigid Airship with Suspended Curtain

Structural performance analysis of a flexible airship and its suspended curtain

Wet modal analysis and experiment study on an airship envelop

Study on the Feasibility of Car-Carried Flutter Test

CFD Based Simulation of Elastic Aircraft in Maneuvering Flight

Modal behaviors and influencing factors analysis of inflated membrane structures

Scaled similarity analysis of aerodynamic characteristics and wind tunnel test for stratospheric airship

Vibration Research of Mast Based on Double Scale

Frequency-domain analyses on the aeroelastic characteristics of thrust-vectored system on airship

Full Scale Measurement on Structural Dynamic Characteristics and Vortex-induced Vibrations of a Long-span Suspension Bridge *

Research on Dynamic Characteristics Analysis and Control Law Design Method of Model Aircraft in Wind Tunnel–Based Virtual Flight Testing

Dynamic modification and application of wing double-beam model

Numerical Research on Impacting Load and Structural Response for a Model Experiment of High-speed Craft

Experimental Investigations on Aerodynamic Characteristics of the Zhiyuan-1 Airship

Numerical Investigation on the Aeroelastic Behavior of an Airship with Hull-Fin Configuration

Experimental Investigation and Numerical Simulation of Ship Stern Structural Vibration Model

Short-time aerodynamic research for large scale test models in hypersonic wind tunnels