Abstract:Pre-chamber jet ignition is a promising combustion technology to accelerate burning velocity and improve combustion stability in natural gas engines. In this study, firstly, the ignition characteristics and the dilution limits in passive pre-chamber system with different orifice diameters were experimentally investigated based on a rapid compression machine (RCM). Methane (CH4) was used as the test fuel and CO2/N2 was used as the dilution components to simulate exhaust gas recirculation conditions in engines. Real-time combustion pressures were recorded and combustion images were captured using high-speed photography to visualize the entire jet ignition and combustion process. The experimental results showed that two different ignition behaviors were observed regarding to different orifice diameters. And no capacity of extending CO2/N2 dilution limits in the passive pre-chamber system compared to conventional spark ignition system. Then three-dimensional numerical simulations were conducted based on the experimental results. Simulation results demonstrated two ignition modes, pre-chamber jet flame ignition and pre-chamber jet autoignition, were presented due to the different jet temperatures, concentrations of immediate species, and turbulence intensities. Lastly, based on the numerical model, the effects of pre-chamber structure parameters on the ignition modes and potentials of different dilution state of mixture in pre-chamber for extending dilution limits were numerically studied. It was found that the ratio of total effective cross-sectional area of orifices to pre-chamber volume (At/VPC) was the key structure parameter of pre-chamber systems to determined different ignition modes. And there was a narrow critical range of At/VPC to achieve pre-chamber jet autoignition (PJAI) mode, beyond which PJFI mode or ignition failure occurred. The actual dilution rate of mixture in the pre-chamber affected the ignition probability and stability in the main chamber. Improving the chemical reactivity of mixture in the pre-chamber was beneficial to effectively extend the dilution limits due to the stronger thermal, chemical, and turbulent effects of pre-chamber jet.Abbreviations: PJI Pre-chamber jet ignition; CSI Conventional spark ignition; NG Natural gas; PM Particulate matter; SI Spark ignition; CI Compression ignition; THC Total hydrocarbon; SCR Selective catalyst reduction; TWC Three-way catalyst; EGR Exhaust gas recirculation; BSFC Brake specific fuel consumption; DI Direct injection; RCM Rapid compression machine; CVB Constant volume bomb; TDC Top dead center; BDC Bottom dead center; CFD Computational fluid dynamics; SOC Start of combustion; PJAI Pre-chamber jet auto-ignition; PJFI Pre-chamber jet flame ignition; TKE Turbulent kinetics energy

The effect of structural parameters of pre-chamber with turbulent jet ignition system on combustion characteristics of methanol-air pre-mixture

Study on ignition mode transition of methanol pre-chamber jet ignition system controlled by boundary condition parameters

Influence of structure parameters of pre-chamber on lean combustion of active pre-chamber jet ignition engine

Effects of ignition methods and control parameters on the lean combustion performance and flame geometry of jet ignition based on constant-volume combustion chamber

Experimental and Numerical Study of a Methane-Fueled Pre-chamber System in Rapid Compression Machine

Experimental investigation of the influence of pre-chamber structural parameters on combustion and emission characteristics of a high compression ratio SI engine

Numerical analysis of the effect of swirl angle and fuel equivalence ratio on the methanol combustion characteristics in a swirl burner

Understanding Interaction Between Reactive Jets in Pre-Chamber Ignition of Gaseous Fuel

Numerical Investigation on the Jet Characteristics and Combustion Process of an Active Prechamber Combustion System Fueled with Natural Gas

Research on the structure of pre-chamber and jet orifice of a turbulent jet ignition rotary engine fueled with methanol/gasoline blends

Visualization study on lean combustion characteristics of the premixed methanol by the jet ignition of an ignition chamber

Extending ultra-lean burn performance of high compression ratio pre-chamber jet ignition engines based on injection strategy and optimized structure

Comparison of Open Chamber and Pre-Chamber Ignition of Methane/air Mixtures in a Large Bore Constant Volume Chamber: Effect of Excess Air Ratio and Pre-Mixed Pressure

Effects of passive pre-chamber jet ignition on combustion and emission at gasoline engine

- WB Phytoplasma asteris ' ' Strains OY-M and . CaA ) and ' ' rp-Australia I ; tuf ( Subgroup Phytoplasma australiense ' ' Candidatus Comparative Genome Analysis of '

Research on the ignition mechanism and structural optimization of turbulent jet pre-chamber in GDI engines

Numerical study of the effects of excess air ratio on passive pre-chamber jet performance and ignition mechanism

Effect of spark timing on the pre-chamber jet ignition in a lean-burn natural gas engine

Experimental study of pre-chamber jet ignition in a rapid compression machine and single-cylinder natural gas engine

Effect of Key Structure Parameters of Passive Pre-chamber on In-Cylinder Combustion Processes and Emissions within a Gasoline Engine

Turbulent jet development of active pre-chamber fueled with zero-carbon fuel blends