Abstract:The flexible strain sensor is of significant importance in wearable electronics, since it can help monitor the physical signals from the human body. Among various strain sensors, the foam-shaped ones have received widespread attention owing to their light weight and gas permeability. However, the working range of these sensors is still not large enough, and the sensitivity needs to be further improved. In this work, we develop a high-performance foam-shaped strain sensor composed of Ti3C2Tx MXene, multiwalled carbon nanotubes (MWCNTs), and thermoplastic polyurethane (TPU). MXene sheets are adsorbed on the surface of a composite foam of MWCNTs and TPU (referred to as TPU/MWCNTs foam), which is prefabricated by using a salt-templating method. The obtained TPU/ foam works effectively as a lightweight, easily processable, and sensitive strain sensor. The TPU/ device can deliver a wide working strain range of ∼100% and an outstanding sensitivity as high as 363 simultaneously, superior to the state-of-the-art foam-shaped strain sensors. Moreover, the composite foam shows an excellent gas permeability and suitable elastic modulus close to those of skin, indicating its being highly comfortable as a wearable sensor. Owing to these advantages, the sensor works effectively in detecting both subtle and large human movements, such as joint motion, finger motion, and vocal cord vibration. In addition, the sensor can be used for gesture recognition, demonstrating its perspective in human—machine interaction. Because of the high sensitivity, wide working range, gas permeability, and suitable modulus, our foam-shaped composite strain sensor may have great potential in the field of flexible and wearable electronics in the near future.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.1c00259?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.1c00259</a>.Additional data and figures including SEM images, syntheses and characterizations of MXene, a demonstration of good adhesion between foam and MXene by attaching onto and peeling off from an adhesive tape, maximum tensile stresses/strains and their standard deviations, stress–strain curves, a repeatability test, relative resistance changes, a pore size distribution, and a finite element simulation analysis (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c00259/suppl_file/nn1c00259_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Simultaneously Stretchable and Compressible Flexible Strain Sensors Based on Carbon Nanotube Composites for Motion Monitoring and Human–Computer Interactions

Highly Stretchable and Sensitive Strain Sensor Based on Porous Materials and Rhombic‐Mesh Structures for Robot Teleoperation (adv. Sensor Res. 10/2023)

Stretchable and Sensitive Strain Sensors Based on CB/MWCNTs–TPU for Human Motion Capture and Health Monitoring

Highly Stable Kirigami-Structured Stretchable Strain Sensors For Perdurable Wearable Electronics

Extremely stretchable strain sensors with ultra-high sensitivity based on carbon nanotubes and graphene for human motion detection

Stretchable Strain Sensor for Human Motion Monitoring Based on an Intertwined-Coil Configuration

Highly Stretchable and Compressible Carbon Nanofiber–Polymer Hydrogel Strain Sensor for Human Motion Detection

Facile Fabrication of Stretchable and Compressible Strain Sensors by Coating and Integrating Low-Cost Melamine Foam Scaffolds with Reduced Graphene Oxide and Poly (Styrene-B-ethylene-butylene-b-styrene)

Stretchable And Compressible Strain Sensors Based On Carbon Nanotube Meshes

Stretchable, Sensitive Strain Sensors with a Wide Workable Range and Low Detection Limit for Wearable Electronic Skins

Superstretchable and Linear-Response Strain Sensors With Carbon Nanotubes Ultrasonically Assembled on Silicone Rubber Film

A Super‐Stretchable and Highly Sensitive Carbon Nanotube Capacitive Strain Sensor for Wearable Applications and Soft Robotics

Super-stretchable, Transparent Carbon Nanotube-Based Capacitive Strain Sensors for Human Motion Detection

Highly Stretchable and Sensitive Strain Sensor Based on Porous Materials and Rhombic‐Mesh Structures for Robot Teleoperation

Ultra‐Stretchable Porous Fiber‐Shaped Strain Sensor with Exponential Response in Full Sensing Range and Excellent Anti‐Interference Ability toward Buckling, Torsion, Temperature, and Humidity

Preparation and Performance of Biaxially Stretched CNT-SBS/POE Flexible Strain Sensor with a Double Percolation Structure

A Flexible Strain Sensor Based on the Porous Structure of a Carbon Black/Carbon Nanotube Conducting Network for Human Motion Detection

Structural and Dimensional Engineering of Three-Dimensional Carbon Nanotube/polydimethylsiloxane Composite for Stretchable Sensor

High-Performance Multidirectional Flexible Strain Sensor for Human Motion and Health Monitoring

High-Performance Foam-Shaped Strain Sensor Based on Carbon Nanotubes and Ti 3 C 2 T x MXene for the Monitoring of Human Activities

Compressive Strain Sensing Elastic Foam Based on Sericin Dispersed Carbon Nanotubes