Abstract:Recently, with increasing mining scale, intensity, and depth, the geological and mining conditions in coal mines are becoming more complicated; therefore, it has resulted in a more difficult situation of coal mine dynamic hazards, including rockburst, coal and gas outburst etc. Dynamic hazards are now posing a serious threat to the safety of coal mining. The precise forecasting of dynamic hazards is significant to their effective control. The acoustic emission (AE) monitoring technique is an effective geophysical monitoring and early warning method which can effectively reveal the characteristics and laws of coal and rock failure under loading. It has been successfully applied in the laboratory and engineering fields. To deeply analyze the characteristics of AE signals in the process of coal-rock damage and failure, thus, to help realize the precise monitoring and early warning of coal mine dynamic hazards, this study first conducted a uniaxial compression test on coal samples in the laboratory, and at the meantime, synchronously collected the full waveform data of AE and the loading data in the entire process of coal failure. Subsequently, using the feature extraction technique in the field of automatic speech recognition, this study extracted the Mel-frequency cepstral coefficient (MFCC) of AE and used it as the sample feature; the stress state of the coal sample was defined as the ratio of the current load the sample bore to its peak load and was employed as the sample label; a model for coal failure state forecasting was established by adopting machine learning methodology. Finally, the model’s forecasting accuracy was evaluated using the five-fold cross-validation method; the influence of different MFCC combinations as sample features on the forecasting accuracy of the model was discussed. The results show that MFCC can well characterize the failure state of coal samples. This parameter behaves in regular variation with increasing loading and shows the law of an obvious sudden increase or sudden decrease or increase followed by a sudden decrease when the loading exceeds 80% of the coal sample’s peak load. The established model can be well used to forecast coal failure state. The accuracy (ACC), true positive rate (TPR), true negative rate (TNR), and area under the curve (AUC) of the model forecasting reach 88.61%, 72.34%, 93.16%, and 0.93, respectively. Machine learning methodology can fully use MFCC features of AE and can identify essential sample features that are difficult to identify with the human eyes. Significant and key features included in the samples are the keys to the high forecasting accuracy of the model. TPR, TNR, and AUC of the model forecasting would be significantly influenced if crucial features were excluded from the samples. Adding features with low importance to the samples has little influence on the forecasting result of the model. This study’s results can provide a reference for further improving the prediction and early warning of coal and rock dynamic hazards.

Applying Machine Learning and Automatic Speech Recognition for Intelligent Evaluation of Coal Failure Probability under Uniaxial Compression

Applying Feature Extraction of Acoustic Emission and Machine Learning for Coal Failure Forecasting

Investigating a three-dimensional convolution recognition model for acoustic emission signal analysis during uniaxial compression failure of coal

Analyzing the Synchronous Acoustic and Electric Response of Coal Burst Failure: Validation Through the On-Site Application

Automatic Recognition of Effective and Interference Signals Based on Machine Learning: A Case Study of Acoustic Emission and Electromagnetic Radiation

Multi-Resolution Feature Fusion Model for Coal Rock Burst Hazard Recognition Based on Acoustic Emission Data

Acoustic Emissions Waveform Analysis for the Recognition of Coal Rock Stability

Response Characteristics and Monitoring-Warning of Acoustic-Electromagnetic Signals in Coal Roadway Heading

Analytical Damage Model for Predicting Coal Failure Stresses by Utilizing Acoustic Emission

Experimental Investigation on Influence Factors of Acoustic Emission Activity in Coal Failure Process

Experimental study on acoustic emission and charge signals during coal failure process at different loading rates

Presenting a New Holistic Robust Approach for Predicting Geo-Failures in Complex Underground Engineering Projects

Deformation Behaviors and Failure Mechanism of Coal under Various Loading Rates Using Acoustic Emission and Digital Image Correlation

Multivariate Prediction Model of Strength and Acoustic Emission Energy Considering Parameter Correlation of Coal or Rock

A Machine-Learning-Based Method for Identifying the Failure Risk State of Fissured Sandstone under Water–Rock Interaction

Early-warning evaluation and warning of rock burst using acoustic emission characteristics of coal sample failure

Study on Deep Learning Methods for Coal Burst Risk Prediction Based on Mining-Induced Seismicity Quantification

Comparative study on fracture characteristics of coal and rock samples based on acoustic emission technology

Study on the Nonlinear Characteristics of EMR and AE during Coal Splitting Tests

AE Regularity of Coal Failure Shear Deformation Localization under Triaxial Dynamical Loading

Crack Pattern Recognition Based on Acoustic Emission Waveform Features