Abstract:With the rapid development of computer vision, vision cameras have been used as noncontact sensors for structural displacement measurements. However, vision-based techniques are limited to short-term displacement measurements because of their degraded performance under varying illumination and inability to operate at night. To overcome these limitations, this study developed a continuous structural displacement estimation technique by combining measurements from an accelerometer with vision and infrared (IR) cameras collocated at the displacement estimation point of a target structure. The proposed technique enables continuous displacement estimation for both day and night, automatic optimization of the temperature range of an infrared camera to ensure a region of interest (ROI) with good matching features, and adaptive updating of the reference frame to achieve robust illumination–displacement estimation from vision/IR measurements. The performance of the proposed method was verified through lab-scale tests on a single-story building model. The displacements were estimated with a root-mean-square error of less than 2 mm compared with the laser-based ground truth. In addition, the applicability of the IR camera for displacement estimation under field conditions was validated using a pedestrian bridge test. The proposed technique eliminates the need for a stationary sensor installation location by the on-site installation of sensors and is therefore attractive for long-term continuous monitoring. However, it only estimates displacement at the sensor installation location, and cannot simultaneously estimate multi-point displacements which can be achieved by installing cameras off-site.

Development of a Low-Cost Vision-Based Real-Time Displacement System Using Raspberry Pi

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Multi-Point Displacement Monitoring of Bridges Using A Vision-Based Approach

Variational Mode Decomposition-Based Multirate Data-Fusion Framework for Estimating Structural Dynamic Displacement by Integrating Vision- and Acceleration-Based Measurements

Real‐time displacement measurement for long‐span bridges using a compact vision‐based system with speed‐optimized template matching

Development and field testing of a vision-based displacement system using a low cost wireless action camera

Vision-based Structural Displacement Measurement: System Performance Evaluation and Influence Factor Analysis

Development and Application of a Vision-Based Displacement Measurement System for Structural Health Monitoring of Civil Structures

Image-Based Structural Dynamic Displacement Measurement Using Different Multi-Object Tracking Algorithms

Development and Field Deployment Validation of a Low-Cost and High-Precision Displacement Sensing System by Fusing Millimeter-Wave Radar and Accelerometer

Environmental effect on vision-based structural dynamic displacement monitoring

Continuous Structural Displacement Monitoring Using Accelerometer, Vision, and Infrared (IR) Cameras

Vision-based Displacement Measurement Sensor Using Modified Taylor Approximation Approach

Cost-effective, vision-based multi-target tracking approach for structural health monitoring

A marker-free method for structural dynamic displacement measurement based on optical flow

An image-based bridge displacement field measurement method with self-vibration elimination

Dynamic displacement measurement of large-scale structures based on the Lucas–Kanade template tracking algorithm

Wireless Binocular Stereovision Measurement System Based on Improved Coarse-to-Fine Matching Algorithm

Computer vision based target-free 3D vibration displacement measurement of structures

Vision and Vibration Data Fusion-Based Structural Dynamic Displacement Measurement with Test Validation

Robust and versatile vision-based dynamic displacement monitoring of natural feature targets in large-scale structures