Abstract:As the world transitions to more renewable and clean energy sources, energy storage systems become crucial. They assist in storing surplus energy produced during peak production times and release it when there is a high energy demand. Phase change material (PCM) based latent heat storage systems are appropriate candidates for efficient thermal energy storage. Their ability to harness the latent heat of phase transitions provides energy density, temperature control, and reduced heat loss advantages, making them well-suited for various applications. In the current research, a novel plate latent heat storage system (P-LHS) inspired by plate heat exchangers was introduced to enhance heat absorption. Besides, to facilitate the limited thermal conductivity of the PCM and increase natural convection phenomena, several fins were applied within the P-LHS system. Artificial neural network (ANN) models were exerted to anticipate the duration needed for melting of 70 % (φ = 0.7) and 100 % (φ = 1) of the PCM. The input variables of the ANN models were the fin angle (β), the distance between two fins (D), and the fin's trail angle (α). This research examined different configurations of the fins within the P-LHS system to find the optimal one. In all the designed Tests, the heat absorption and temperature distribution within the PCM were accelerated; thereby, the melting time up to φ = 0.7 and φ = 1 was reduced remarkably compared to those in the fin-less P-LHS system. Besides, for the fastest full melting of the material in the P-LHS system, the optimal design 2 (OD2) was proposed, in which the fins should have the dimensions of α = 171.450°, β = 97.540°, and D = 27.545 mm. In OD2, the time needed until the melting of 70 % of the PCM was decreased by approximately 65.68 %. While, the necessary duration for the PCM to melt entirely was 1574 s, approximately 66.80 % less than the time needed for melting the substance in the system without fins (4741 s). This reduction in melting time was about 53 min, which is a significant amount of time in energy storage systems.

Implementation of artificial neural network in a building benefits from radiant floor heating /cooling enhanced by phase change materials

Transient numerical study on injecting PCM in buildings along with extra comfort ventilation: Use of artificial neural network to decline energy utilization

A novel hybrid optimization and machine learning technique to energy storage in smart buildings using phase change materials

ANN Usefulness in Building Enhanced with PCM: Efficacy of PCM Installation Location

A review of radiant heating and cooling systems incorporating phase change materials

Experimental Investigation and Numerical Modeling of Room Temperature Control in Buildings by the Implementation of Phase Change Material in the Roof

Optimizing the characteristic cooling curves of PCM-integrated thermally active buildings: Experimental and numerical investigations

Enhancing thermal comfort in buildings through the integration of phase change material on the building envelope: a simulation study

Improving phase change heat transfer in an enclosure filled by uniform and heterogenous metal foam layers: A neural network design approach

Energy management of residential buildings using innovative passive techniques

Artificial neural network-based optimization of heat absorption process of phase change materials in a novel-designed finned-plate latent heat storage system

Phase change with inner ventilation for energy management: Roofs buildings in hot & dry climates case

Forecasting the temperature of a building-integrated photovoltaic panel equipped with phase change material using artificial neural network

Numerical analysis on phase change progress and thermal performance of different roofs integrated with phase change material (PCM) in Moroccan semi-arid and Mediterranean climates

Experimental Investigation and Numerical Validation on the Energy-Saving Performance of A Passive Phase Change Material Floor for A Real Scale Building

Enhancement of a radiant floor with a checkerboard pattern of two PCMs for heating and cooling: Results of a real-scale monitoring campaign

Thermal Analysis of Building Roofs with Latent Heat Storage for Reduction in Energy Consumption and CO2 Emissions: An Experimental and Numerical Research

Computational Study of Phase Change Heat Transfer and Latent Heat Energy Storage for Thermal Management of Electronic Components Using Neural Networks

Physics-consistent Input Convex Neural Network-Driven Reinforcement Learning Control for Multi-Zone Radiant Ceiling Heating and Cooling Systems: an Experimental Study

Study on the Influence of the Application of Phase Change Material on Residential Energy Consumption in Cold Regions of China

Experimental investigation of influence of phase change materials in energy consumption of air-conditioning units and prediction performance evaluation of modified deep neural network model