Abstract:This paper presents an experimental study on controlled ASSCI (Assisted Spark Stratified Compression Ignition) for engine knock suppression in a GDI engine with high compression ratio. The direct injection is used for forming desired stoichiometric stratified mixture at WOT condition without turbo-charging. The engine is filled with 20% cooled external EGR and the ignition timing is maintained at MBT point. The combustion characteristics of the desired stoichiometric stratified mixture show two-stage heat release, where the first stage is caused by spark ignition and the second stage is due to moderate auto-ignition. Compared with engine knock, the second stage heat release of controlled ASSCI shows smooth pressure curve without pressure oscillation. This is due to the low energy density mixture around the cylinder wall caused by cooled external EGR. The stratified mixture could suppress knock. Fuel economy and combustion characteristics of the baseline and the controlled ASSCI combustion were compared. The baseline GDI engine reaches a maximum of 8.9 bar BMEP with BSFC of 291 g/(kWh), the controlled ASSCI combustion achieves a maximum of 8.3 bar BMEP with BSFC of 256 g/(kWh), improving the fuel economy over 12% while maintaining approximately the same power. CA50 (the crank angle of 50% heat release) of the controlled ASSCI is detected at 8.4 degrees CA ATDC, which is degrees 17.4 CA advanced than that of the baseline while the combustion duration of the controlled ASSCI is 52.8 degrees CA, 16.6 degrees CA longer than that of the baseline caused by diluted mixture and two-stage heat release. The COV of the controlled ASSCI is 1.4%, 2.1% lower than that of the baseline. The peak pressure (P-max and the maximum pressure rise rate (PRRmax) of the controlled ASSCI are 59.7 bar and 2.2 bar/degrees CA, 22.9 bar and 1.5 bar/degrees CA higher than that of the baseline respectively. The crank angle of P-max and PRRmax of the controlled ASSCI are 11 degrees CA ATDC and -1 degrees CA ATDC, 15.4 degrees CA and 17.2 degrees CA earlier than that of the baseline. The results show that controlled ASSCI with two-stage heat releases is a potential combustion strategy to suppress engine knock while achieving high efficiency of the high compression ratio gasoline engine.

Potential of High Compression Ratio Combined with Knock Suppression Strategy for Improving Thermal Efficiency of Spark Ignition Stoichiometric Natural Gas Engine

Effect of Spark Timing on the Combustion Stages Seen in a Heavy-Duty Compression-Ignition Engine Retrofitted to Natural Gas Spark-Ignition Operation

Multiple Combustion Stages Inside a Heavy-Duty Diesel Engine Retrofitted to Natural-Gas Spark-Ignition Operation

Limitations of Natural Gas Lean Burn Spark Ignition Engines Derived from Compression Ignition Engines

Engine Performance and Emissions for a Heavy-Duty Diesel Engine Converted to Stoichiometric Natural Gas Operation

Experimental Investigation of a Heavy-Duty Compression-Ignition Engine Retrofitted to Natural Gas Spark-Ignition Operation

Optical and Numerical Investigations of Flame Propagation in a Heavy Duty Spark Ignited Natural Gas Engine

An Experimental Study of the Combustion Process in a Natural-Gas Spark-Ignition Engine

Numerical investigation on combustion regulation for a stoichiometric heavy-duty natural gas engine with hydrogen addition considering knock limitation

Effects of Chamber Geometry, Hydrogen Ratio and EGR Ratio on the Combustion Process and Knocking Characters of a HCNG Engine at the Stoichiometric Condition

Knocking suppression by stratified stoichiometric mixture with two-zone homogeneity in a DISI engine

Effects of direct water injection timings on knock suppression, combustion, and emission performance of high compression ratio hydrogen-enriched natural gas engine

Numerical and Experimental Study on Knock Sources in Spark Ignition Engine with Electromagnetic Valve Train

Experimental Research on Knocking Suppression Using Stratified Stoichiometric Mixture in a GDI Engine

Effect of Atkinson Cycle Coupling Compression Ratio on the Combustion Characteristics of Natural Gas Engines

Simulation Research on the Effect of Cooled EGR, Supercharging and Compression Ratio on Downsized SI Engine Knock

Experimental and Numerical Investigation on Knock for a Heavy-Duty Spark Ignition Methanol Engine

Controlled Assci With Moderate Auto-Ignition For Engine Knock Suppression In A Gdi Engine With High Compression Ratio

Controlled Ssci with Moderate End-Gas Auto-Ignition for Fuel Economy Improvement and Knock Suppression

Co-optimization of Miller Degree and Geometric Compression Ratio of a Large-Bore Natural Gas Generator Engine with Novel Knock Models and Machine Learning

Performance, combustion and knock assessment of a high compression ratio and lean-burn heavy-duty spark-ignition engine fuelled with n-butane and liquefied methane gas blend