Abstract:The conceptual design and optimization of supercritical water gasification (SCWG) for poly-generation are performed in the viewpoint of the thermodynamic analysis and economic assessment, which can promote the industrial application. Assuming a high concentration slurry feed and proposing complicated process design in the current research reduce the possibility of practical application, and also fails to ensure the efficient energy output. In this study, a SCWG process scheme was designed specifically for a pulping modification process, coupling with a multistage reactor configuration and gradient heat transfer configuration. The optimal process conditions were explored by investigating the effects of water diversion, feed concentration, and in-situ hydrogen separation rate (ISHS) on the energy output of the SCWG system, as well as analyzing the energy distribution and exergy losses. In order to maximize the energy output by making full use of waste heat, the exergy losses and energy efficiency of the SCWG poly-generation of hydrogen-electricity (PGHE) and poly-generation of hydrogen-heat (PGHH) systems were compared to investigate the suitable poly-generation process. The suitable SCWG poly-generation process scheme was verified to have low carbon emission and energy cost by evaluating the environmental impact of the system over its life cycle and its levelized cost of energy (LCOE). It was shown that increasing the feed concentration and ISHS rate, and reducing the amount of water diversion can improve the energy and exergy efficiencies. The optimum hydrogen production, energy efficiency and exergy efficiency of the SCWG system were 1651.44 kg/h, 47.58 % and 48.87 %, respectively, for a feed concentration of 50 wt%, an ISHS rate of 40 %, a preheat water ratio of 4, and a water diversion of 1. The exergy loss is mainly concentrated in the oxidation reactor and cooling unit, and the waste heat utilization coupled with ISHS can reduce significantly the exergy loss in the cooling unit and improve the energy efficiency and exergy efficiency of the system. PGHH has a greater impact on energy yield than PGHE, and at an ISHS rate of 40 %, the exergy loss of the system is reduced to 69800.48 kW, and the energy efficiency and exergy efficiency are increased to 73.34 % and 72.38 %, respectively. Meanwhile, under the condition of PGHH, coupling with an ISHS rate of 40 % and carbon capture and storage can minimize the environmental impact of the system, with a global warming potential of 5.03 kg CO2-eq. The LCOE of SCWG system coupled with PGHH is as low as 0.696 CNY/kWh. The completion of the study can accelerate the industrial application of the SCWG poly-generation project with conceptual design and theoretical guidance.

Thermodynamic and Environmental Analysis of Heat Supply in Pig Manure Supercritical Water Gasification System

Thermodynamic Modeling and Analysis of the Heat Integration and Power Generation in Pig Manure Supercritical Water Gasification System

Thermodynamic Analysis and Optimization of Auto-Thermal Supercritical Water Gasification Polygeneration System of Pig Manure

Thermodynamic and environmental analysis of an auto-thermal supercritical water gasification system for ammonia and power production from chicken manure

Optimal Design and Thermodynamic Analysis on the Hydrogen Oxidation Reactor in a Combined Hydrogen Production and Power Generation System Based on Coal Gasification in Supercritical Water

Thermodynamic and Environmental Analysis of an Integrated Multi-Effect Evaporation and Organic Wastewater Supercritical Water Gasification System for Hydrogen Production

Clean conversion of pig manure via supercritical water gasification: Hydrogen-enriched syngas generation, mechanisms analysis, and environmental impacts

Thermodynamic analysis of the series system for the supercritical water gasification of coal-water slurry

Thermodynamic and Environmental Analysis of Auto-Thermal Supercritical Water Co-Gasification Polygeneration System of Sewage Sludge with Coal

Thermodynamic and environmental analysis of integrated supercritical water gasification of sewage sludge for power and hydrogen production

Thermodynamic, Environmental Analysis and Comprehensive Evaluation of Supercritical Water Gasification of Biomass Fermentation Residue

Gasification of Pig Manure for Hydrogen Production in Supercritical Water: Reaction Variables, Product, and Mechanism Analysis

Energy, Exergy, Environmental, and Economic Evaluation and Conceptual Design of Supercritical Water Gasification of Bark Integrated with Poly-Generation

Thermodynamic Analysis of the Superiority of the Direct Mass Transfer Design in the Supercritical Water Gasification System

Exergy and Energy Analysis of Coal Gasification in Supercritical Water with External Recycle System

Molecular dynamics simulation on interaction effect of complex contents on supercritical water gasification of pig breeding wastewater for hydrogen production

System Design and Thermodynamic Analysis on a Coal Supercritical Water Gasification Power Generation System Integrated with Supercritical Carbon Dioxide Cycle

Model-based Thermodynamic Analysis of Supercritical Water Gasification of Oil-Containing Wastewater

System Design and Thermo-Economic Analysis of a New Coal Power Generation System Based on Supercritical Water Gasification with Full CO2 Capture

Thermodynamic and Environmental Analysis of Two-Stage Series Supercritical Water Gasificationof Biomass for Hydrogen Production

Thermodynamic analysis of a supercritical water gasification – oxidation combined system for sewage sludge treatment with cool wall reactor