Abstract:With the rapid increasing drainage of industrial sewage, the problems arising from sewage containing high-concentration surfactant become more urgent. In order to purify the high-concentration surfactant solution, a novel integrated technology of foam separation and TiO 2 photocatalysis was developed. An anionic surfactant of sodium dodecyl benzene sulfonate (SDBS) was used as the model surfactant and its initial concentration in the simulated solution was 0.5 g/L. First, foam separation had been performed to primitively reduce SDBS concentration in the simulated solution. Based on the results of independent factor test, a five-level-three-factor central composite design (CCD) based on response surface design (RSM) was used to predict the optimal experimental conditions. Under above conditions, the enriching proportion and removing percentage of SDBS were 4.69 ± 0.14 and 84.85 ± 0.71 %, respectively. The surface tension and foam stability of the residual solution after foam separation had been measured using pulling ring method and bubbling method, respectively. The residual solution after foam separation possessed a higher surface tension and weaker foam stability compared with those of freshly prepared SDBS solution. Extrinsic fluorescence spectra using pyrene showed that interfacial adsorption had led to the generation of hydrophilic SDBS micelles. In order to perform TiO 2 photocatalysis, the adsorption capacity of SDBS on TiO 2 nanoparticles had been studied. The adsorption of SDBS on TiO 2 nanoparticles obeyed Pseudo-second-order dynamics model and Freundlich isotherm model. Based on the unique optical property and particle entrainment capacity of foam, a coupling operation of foam separation and TiO 2 photocatalysis was proposed to degrade SDBS in the residual solution. The suitable operating conditions were identified and the maximum degradation percentage of SDBS reached 94.86 ± 1.06 %. The total SDBS removing percentage of developed technology was 99.38 ± 0.10 %. Total organic carbon (TOC) concentrations of SDBS solution before and after treatment were measured using combustion oxidation coupled nondispersive infrared absorption method. Finally, the economic analysis was carried out to assess the cost effectiveness of the integrated technology of foam separation and TiO 2 photocatalysis.

Construction of a recyclable chitosan-based aerogel-supported TiO2 catalyst for treating high-concentration surfactants

Carbon-doped titania-polymethylsilsesquioxane aerogels for the photocatalytic degradation of antibiotics

Spherical Cu<sub>2</sub>O-Fe<sub>3</sub>O<sub>4</sub>@chitosan bifunctional catalyst for coupled Cr-organic complex oxidation and Cr(VI) capture-reduction

Tio2/Ti3c2tx Gel Microsphere for Efficient Photocatalytic Degradation of Organic Pollutant with Excellent Recycling Stability

Effective treatment of high-concentration SDBS solution by developing a novel integrated technology of foam separation and photocatalysis

Reusable and environmentally friendly cellulose nanofiber/titanium dioxide/chitosan aerogel photocatalyst for efficient degradation of tetracycline

Enhanced Photodegradation of Pentachlorophenol by Single and Mixed Nonionic and Anionic Surfactants Using Graphene–tio 2 As Catalyst

Synthesis of Activated Carbon-Supported TiO2-based Nano-Photocatalysts with Well Recycling for Efficiently Degrading High-Concentration Pollutants

Synthesis of Au-decorated three-phase-mixed TiO2/phosphate modified active carbon nanocomposites as easily-recycled efficient photocatalysts for degrading high-concentration 2,4-DCP

The Photocatalytic Degradation Mechanism for Organic Pollutants in Seawater and the Fabrication of Catalyst-Loaded Floating Spheres for Effectively Removing Tetracycline

Chitosan-based recyclable composite aerogels for the photocatalytic degradation of rhodamine B

Covalent Immobilization of TiO2 Within Macroporous Polymer Monolith As a Facilely Recyclable Photocatalyst for Water Decontamination

TiO2 Nanodots Anchored on Nitrogen-Doped Carbon Nanotubes Encapsulated Cobalt Nanoparticles As Photocatalysts with Photo-Enhanced Catalytic Activity Towards the Pollutant Removal

Tailored Chitosan-Based Entrapped Catalyst for Dyes Removal by Highly Active, Stable, and Recyclable Nanoparticles Toughened Hydrogel.

Removal of Organic Pollutants with Polylactic Acid-Based Nanofiber Composites

Excellent Photocatalytic Degradation Activities of Ordered Mesoporous Anatase TiO2–SiO2 Nanocomposites to Various Organic Contaminants

High-efficiency removal of antibiotic pollutants by magnetic carbon aerogel: Inherent roles of adsorption synergistic catalysis

Regenerated cellulose as template for in-situ synthesis of monoclinic titanium dioxide nanocomposite carbon aerogel towards multiple application in water treatment

Synthesis of high-efficient TiO2/clinoptilolite photocatalyst for complete degradation of xanthate

Production of carbon-doped titanium dioxide (C–TiO2) from polytitanium-coagulated sludge as an adsorbent or photocatalyst for pollutant removals

Surface modified of chitosan by TiO2@MWCNT nanohybrid for the efficient removal of organic dyes and antibiotics