Abstract:Ammonia is a zero-carbon candidate fuel for the decarbonization of internal combustion (IC) engines. A concern when using ammonia in IC engines is the increased emissions of nitrogen oxides (NOX), due to the additional nitrogen in the ammonia molecule. Compared to conventional petroleum such as gasoline and diesel, ammonia combustion adds the fuel NOX formation mechanism in addition to the original thermal NOX generation pathway, which further complicates the NOX emission characteristics of ammonia engines. Decoupling fuel NOX and thermal NOX helps to increase the understanding of the formation and evolutionary characteristics of nitrogen oxides occurring inside ammonia engines, but the available literature lacks studies in this respect. The purpose of this study is to fill this research gap and to propose a methodology for decoupling fuel NOX and thermal NOX. In brief, an artificial elemental nitrogen is applied to the Zeldovich mechanism and to the diatomic nitrogen in the combustion air, which allows the formation of NOX from the elemental nitrogen in the ammonia fuel to be separated from the NOX formed from the nitrogen in the air. A three dimensional (3D) computational fluid dynamics (CFD) model demonstrates the effectiveness of this approach and investigates the spatial and temporal distribution characteristics of thermal NOX and fuel NOX in the turbulent combustion field of ammonia engines. The in-cylinder activity analysis suggests that this separation of the NOX formation mechanism slightly alters the nitrogen-based chemistry, which is unavoidable. However, this approach still allows a reasonable characterization of the formation and evolution of fuel NOX and thermal NOX. The simulations show that fuel NOX is formed during ammonia oxidation because fuel NOX is an intermediate species, while thermal NOX has a high concentration in the burned zone because it is related to the temperature and the residence time of nitrogen at that temperature, both of which are expected and support the successful decoupling of fuel and atmospheric nitrogen. In addition, nitrous oxide (N2O) emissions come from the fuel NOX mechanism and are mainly distributed along the liner walls as it is formed by partial oxidation of ammonia released from the crevices during the late oxidation process. Moreover, the concentrations of both thermal and fuel-based nitrogen monoxide vary with the chemical equilibrium that changes with piston motion, and their concentrations are always comparable. As a result, combustion strategies for ammonia internal combustion engines needs to consider both thermal and fuel NOX reduction mechanisms, where the main difficulty is the N2O reduction. Catalytic combustion mode may be a viable strategy to improve the oxidation efficiency of the ammonia fuel trapped in the crevice and reduce N2O emissions in the cylinder.

Experimental and Kinetic Study of NO/NO2 Chemical Effects on N-Heptane High Temperature Auto-Ignition

Investigation of the Mechanism Behind the Surge in Nitrogen Dioxide Emissions in Engines Transitioning from Pure Diesel Operation to Methanol/diesel Dual-Fuel Operation

Impact of Nitric Oxide (NO) on N-Heptane Autoignition in a Rapid Compression Machine

Experimental and modeling study of NO 2 addition effects on autoignition behavior of propylene

Experimental and Numerical Study on the Effect of NO on -Butanol/Biodiesel Dual-Fuel Combustion in a Compression Ignition Engine.

Effects of NO on the ignition of hydrogen and hydrocarbons by heated counterflowing air

The Application of Argon-Oxygen Atmosphere to Investigate the Formation and Evolution of Fuel Nitrogen Oxides During the Oxidation of Hydrogen-Ammonia Fuel Mixtures under Representative Engine In-Cylinder Conditions

Effect of nitrogen dioxide addition on ethane auto-ignition at different pressures and equivalence ratios: Experiments and chemical kinetic modeling

Effects of NO_x on the Ignition of Methane/Air Mixtures

Formation and Evolution of Thermal and Fuel Nitrogen Oxides in the Turbulent Combustion Field of Ammonia Internal Combustion Engines

Experimental and Kinetic Modeling Studies on Oxidation of N-Heptane under Oxygen Enrichment in a Jet-Stirred Reactor

Numerical Investigation of the Effect of Ammonia Addition on the Performance of a Stoichiometric Operated Natural Gas Spark Ignition Engine

Nitrogen Oxides Emission Characteristics of Zero-Carbon Ammonia-Hydrogen Fuels for Internal Combustion Engines

Ignition Enhancement of Ethylene/air by NOx Addition

Experimental and numerical analyses of nitrogen oxides formation in a high ammonia-low hydrogen blend using a tangential swirl burner

Chemical Kinetic Study of Gasoline Surrogate with Ammonia on Combustion: Iso-octane Modeling

Ignition Delay Time of Small Hydrocarbons-Nitrous Oxide (-Oxygen ) Mixtures

Effect of Reaction Conditions on Nitrogen Conversion During Char-O2/NO Combustion

Experimental studies of NO doped Syngas: Ignition at elevated pressures

Role of O 2 on nitrous oxide fuel blend ethylene auto-ignition sensitivity

Nitromethane as a nitric oxide precursor for studying high-temperature interactions between ammonia and nitric oxide in a shock tube