Abstract:Purpose - Water-lubricated rubber bearing is one of the most appropriate bearings for underwater use. The most popular design used widely today is the straight fluted rubber bearing. The special configuration leads to partial hydrodynamic lubrication and low load capacity. A new bearing bush structure with two cavities which is favorable for constructing continuous hydrodynamic lubrication was designed and studied. The paper aims to discuss these issues.Design/methodology/approach - A new bearing bush structure with two cavities which is favorable for constructing continuous hydrodynamic lubrication was designed. The apparatus for studying the tribological behaviors of the two types of water-lubricated rubber bearings has been devised and established in the paper. The experimental studies on the tribological properties of the rubber bearings have been conducted under different loads and velocities. The eccentricity ratio of the new structure rubber bearing with two cavities was measured in experiment and the load capacity was calculated by numerical simulation.Findings - The experimental results show that the friction coefficient decreases with increasing velocity; the friction coefficient increases sharply with the rising temperature, the friction coefficient increases at first and then decreases with increasing load for fluted rubber bearings. The numerical results were in good agreement with the experimental results. The numerical results show that complete hydrodynamic lubrication can be formed in the new designed rubber bearing with two cavities. The experimental and numerical results all indicate that there is an appropriate bearing clearance which the friction coefficient is minimum and the load capacity is maximum.Originality/value - A new bearing bush structure with two cavities which is beneficial to constructing continuous hydrodynamic lubrication film was designed. A new apparatus for studying the tribological behaviors of the two types of water-lubricated rubber bearings has been devised and established. Experimental and numerical study on the new structure rubber bearing were conducted in the paper.

The Fluid-Structure Interaction Lubrication Performances of a Novel Bearing: Experimental and Numerical Study

Experimental and numerical study on the mixed lubrication performances of a new bearing

Experimental and numerical exploration on the nonlinear dynamic behaviors of a novel bearing lubricated by low viscosity lubricant

Lubrication Performance of a Novel Double-Film Bearing: Theory & Experiment

Lubrication behaviors of a novel bearing with fluid-solid-thermal (FST) approach: Experimental and theoretical investigation

Theoretical and experimental study on the fluid-structure-acoustic coupling dynamics of a new water lubricated bearing

Experimental and theoretical analysis on the nonlinear rotor-dynamic performances and vibration characteristics of a novel bearing-rotor system

Experimental research on the interface lubrication regimes transition of water lubricated bearing

Investigation on the Stability and Anti-Eccentric Load Margin of a Novel Structure Bearing Lubricated by Low Viscosity Medium

An investigation on the lubrication characteristics of floating ring bearing with consideration of multi-coupling factors

Theoretical and experimental exploration into the fluid structure coupling dynamic behaviors towards water-lubricated bearing with axial asymmetric grooves

Analysis of the Tribological and Dynamic Performance of the Self-Adapting Water-Lubricated Stern Bearing

Analysis of the Interface Lubrication Performances of Water Lubrication Bearing

Theoretical and Experimental Exploration on the Micro Asperity Contact Load Ratios and Lubrication Regimes Transition for Water-Lubricated Stern Tube Bearing

Analysis on the Lubrication Performances of Journal Bearing System Using Computational Fluid Dynamics and Fluid–structure Interaction Considering Thermal Influence and Cavitation

Effect of Turbulence on Lubrication Behaviors of a New Bearing under Bi-Misaligned Status: Theoretical and Experimental Study

Experimental And Numerical Study On Water-Lubricated Rubber Bearings

Theoretical and experimental study on influences of surface texture on lubrication performance of a novel bearing

2D Numerical Analysis on Lubrication Process of Float Ring Bearing

Boundary Slip Design of High Speed Water Lubricated Journal Bearing

Theoretical and experimental research on the micro interface lubrication regime of water lubricated bearing