Abstract:Efficient and stable electrode materials are urgently required for wastewater treatment in the electrocatalytic degradation of toxic and refractory organic pollutants. Ti3+ self-doping black TiO2 nanotube arrays (Ti/B-TiO2-NTs) as an interlayer were used for preparing a novel PbO2 electrode via an electrochemical reduction technology, and a sodium dodecyl sulfate (SDS)-modified PbO2 catalytic layer was successfully achieved via an electrochemical deposition technology. The physicochemical characterization tests showed that the Ti/B-TiO2-NTs/PbO2-SDS electrodes have a denser surface and finer grain size with the introduction of Ti3+ in the interlayer of Ti/TiO2-NTs and the addition of SDS in the active layer of PbO2. The electrochemical characterization results showed that the Ti3+ self-doping black Ti/TiO2-NTs/PbO2-SDS electrode had higher oxygen evolution potential (2.11 V vs. SCE), higher electrode stability, smaller charge-transfer resistance (6.74 Ω cm−2), and higher hydroxyl radical production activity, leading to it possessing better electrocatalytic properties. The above results indicated that the physicochemical and electrochemical characterization of the PbO2 electrode were all enhanced significantly with the introduction of Ti3+ and SDS. Furthermore, the Ti/B-TiO2-NTs/PbO2-SDS electrodes displayed the best performance on the degradation of methylene blue (MB) in simulated wastewater via bulk electrolysis. The removal efficiency of MB and the chemical oxygen demand (COD) could reach about 99.7% and 80.6% under the optimal conditions after 120 min, respectively. The pseudo-first-order kinetic constant of the Ti/B-TiO2-NTs/PbO2-SDS electrode was 0.03956 min−1, which was approximately 3.18 times faster than that of the Ti/TiO2-NTs/PbO2 electrode (0.01254 min−1). In addition, the Ti/B-TiO2-NTs/PbO2-SDS electrodes showed excellent stability and reusability. The degradation mechanism of MB was explored via the experimental identification of intermediates. In summary, the Ti3+ self-doping black Ti/TiO2-NTs/PbO2-SDS electrode is a promising electrode in treating wastewater.

Electro-activation of Peroxymonosulfate by Β-Pbo2 Partial Filling/covering TiO2 Nanotube Arrays Anode for Alkaloid Berberine Degradation: Performance, Mechanism and Practicability

Application of 3D hierarchical porous NiCo-spinel nanosheet array for enhancement of synergistic activation of peroxymonosulfate: Degradation, Intermediates, mechanism and degradation pathway of tetracycline

Mechanism of Β-Mno2 Particle for the Peroxymonosulfate Activation under Electric Field: the Promoting Effect of Carbamazepine on Mn(III) and Reactive Oxygen Species Production

Peroxymonosulfate activation with Co3O4 by microstructure engineering for efficient degradation of tetracycline: Efficiency, mechanism and stability

Fabrication of sulfur-doped TiO2 nanotube array as a conductive interlayer of PbO2 anode for efficient electrochemical oxidation of organic pollutants

Insights into catalytic activation of peroxymonosulfate for carbamazepine degradation by MnO2 nanoparticles in-situ anchored titanate nanotubes: Mechanism, ecotoxicity and DFT study

Performance and doped mechanism of a novel PbO_2 anode

Influence of MnOx deposition on TiO2 nanotube arrays for electrooxidation

Selective <SUP>1</SUP>O<sub>2</sub> Generation from Peroxymonosulfate Activation over N-Doped Carbon Nanosponges for Pollutant Degradation

Reactive species regulation by interlayered Na+/H+ of titanate nanotubes decorated Co(OH)2 hollow microsphere for peroxymonosulfate activation and gatifloxacin degradation

Development of SDS-Modified PbO2 Anode Material Based on Ti3+ Self-Doping Black TiO2NTs Substrate as a Conductive Interlayer for Enhanced Electrocatalytic Oxidation of Methylene Blue

A robust peroxymonosulfate activator for tetracycline degradation: Mitigating deactivation via stitching N -doped carbon nanotubes with encapsulated Co nanoparticles in bubble-like architectures

Engineering phase and vacancy with anchoring Fe nanoparticles for photothermal conversion in peroxymonosulfate activation toward efficient removal of carbamazepine

In-situ Fabrication of MOF-derived MnO-C Modified Graphite Felt for Electro-Activation of Peroxymonosulfate Toward Degradation of Tetracycline: Performance, Mechanism and Degradation Pathway

Promoting the performance of electrooxidation-PMS system for degradation of tetracycline by introduction of MnFe2O4/CNT as a third-electrode

Enhanced Peroxymonosulfate Activation by a Benzoquinone-Functionalized Carbon Nanotube Filter for Micropollutant Degradation

Peroxymonosulfate activation for preferential generation of hydroxyl radical with atomic Mn anchored TiO2 in photoelectrochemical process

A New Insight into the Mechanism in Fe3O4@CuO/PMS System with Low Oxidant Dosage

Activation of peroxymonosulfate by β-FeOOH@Cia-MoS2 for enhancing degradation of tetracycline: significant roles of surface functional groups and Fe/Mo redox reactions

Electrochemically Reduced Phytic Acid-Doped TiO2 Nanotubes for the Efficient Electrochemical Degradation of Toxic Pollutants.

Towards full cell potential utilization during water purification using Co/Bi/TiO2 nanotube electrodes