Removal of Gaseous Hg0 Using Biomass Porous Carbons Modified by an Environmental-Friendly Photochemical Technique

Ying Li,Yan Wang,Zhifei Dou,Yangxian Liu

DOI: https://doi.org/10.1016/j.cej.2022.141152

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Biomass porous carbon is considered as a potential substitute to activated carbon for sorption removal of gaseous Hg0 due to renewable raw materials and wide sources. However, the lack of sufficient active sites on carbon surface is the major obstacle to its development. The common modification methods (e.g., acid/alkali, sulfide, halide, metal oxide, precious metals, etc.) have some remaining problems such as big energy consumption, high running cost, extreme operational conditions or secondary pollution. In this article, an environmental-friendly UV/H2O2 advanced oxidation process (AOP) was used to modify biomass porous carbons by producing hy-droxyl radicals (center dot OH) to form more containing-oxygen functional groups to capture gaseous Hg0. Different modification techniques and modification parameters, process parameters affecting Hg0 removal, Hg0 sorption removal mechanisms and kinetics were studied. Result indicates that UV/H2O2 AOP modification can not only slightly raise the specific surface areas of adsorbent, but also make the containing-oxygen functional groups on adsorbent surface more abundant, which greatly strengthen the gaseous Hg0 sorption removal. The best H2O2 modification concentration and optimum operating temperature of the gaseous Hg0 sorption removal are 5 wt% and 120 degrees C, respectively. In the mercury removal test, the average mercury removal efficiency of WSWUV5 and RSWUV5 can reach 90.59% and 88.09% respectively. The containing-oxygen functional groups, mainly relating to C-O and -OH, and chemisorbed oxygen (O*) on porous carbon surfaces were identified as the key active sites, and chemisorption has been confirmed to play a major control role in the gaseous Hg0 sorption removal.