Abstract:Large-capacity medium-temperature (100–300 °C) and high-temperature (>300 °C) latent heat storage (LHS) systems can enhance the reliability and performance of solar thermal utilization systems due to their characteristics of balancing the gap between energy supply and demand. In this study, a pilot-scale LHS system was developed and investigated, incorporating a mass of 270 kg of phase change material (PCM), specifically a commercial nitrate mixture. Moreover, the thermal energy storage unit featured a rectangular aperture at its center, covered by a quartz visualization window to facilitate the observation of the melting and solidification behavior of the PCM. The charging process lasted 111 min, with a mean average power, accumulated energy and efficiency of 11.90 kW, 79.33 MJ, and 77.67%, while those of the discharging process were 56.5 min, 12.99 kW, 44.11 MJ, and 71.41%, respectively. Furthermore, a comparative analysis was conducted concerning heat transfer performance and mechanisms during the charging and discharging processes. The heat transfer coefficients and average thermal resistances of the LHS system during charging and discharging were 613.08 W/(m2·K), 295.28 W/(m2·K), and 0.001984 (m2·K)/W, 0.005285 (m2·K)/W, respectively. The average thermal resistance observed during the charging process was notably lower than that observed during the discharging process, attributable to the variance in the predominant heat transfer mechanism. For a substantial portion of the charging process duration, heat transfer was dominantly governed by natural convection, whereas throughout a significant duration of the discharging process, heat transfer was primarily driven by thermal conduction.

Thermal performance investigation of large-scale latent heat storage for heat supply

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Performance Investigation on an Air Source Heat Pump System with Latent Heat Thermal Energy Storage

Optimal design and thermal performance study of a two-stage latent heat thermal energy storage technology for heating systems

Performance Evaluation and Analysis of a Vertical Heat Pipe Latent Thermal Energy Storage System with Fins-Copper Foam Combination

Latent Heat Thermal Storage Using Salt Hydrates for Distributed Building Heating: A Multi-Level Scale-Up Research

Heat transfer and thermal performance investigation on a visualized latent heat storage system in pilot-scale: Scalable medium-temperature thermal energy storage system

Study on thermal performance improvement technology of latent heat thermal energy storage for building heating

Performance Study of Phase Change Charging/discharging Processes of Condensing Heat Storage in Cold Regions Based on a Mathematical Model

Experimental Study on a Pilot-Scale Medium-Temperature Latent Heat Storage System with Various Fins

Research on the thermal behavior of medium-temperature phase change materials and factors influencing the thermal performance based on a vertical shell-and-tube latent heat storage system

Experimental and Numerical Investigation on Latent Heat/cold Stores for Advanced Pumped-Thermal Energy Storage

Thermal and Fluid Characteristics of a Latent Heat Thermal Energy Storage Unit

Numerical Simulation of Thermal Performance and Thermal Stress of Latent Heat Storage System with Various Fins

Investigation on the thermal performance of a high-temperature latent heat storage system

An experimental investigation on the heat transfer characteristics of cascaded thermal storage units based on multichannel flat tubes

Numerical investigation of latent heat storage unit with dual helical tube

Thermal Performance Investigation of a Medium-Temperature Pilot-Scale Latent Heat Thermal Energy Storage System: the Constant and Step Temperatures Charging and Discharging

Efficiency analysis of latent heat storage module with internal fluid flow

Experimental Study on the Thermodynamic Performance of Cascaded Latent Heat Storage in the Heat Charging Process

Low-grade Industrial Waste Heat Utilization in Urban District Heating: Simulation-based Performance Assessment of a Seasonal Thermal Energy Storage System