Abstract:The catalytic performances over propylene epoxidation with H 2 and O 2 (HOPO process) are significantly affected by the properties (e.g., surface properties, Ti coordination, and morphology) of titanosilicate zeolite. Introducing urea into zeolite synthesis is a simple and convenient method to modify these properties of titanosilicate zeolite. Uncalcined pore-blocked titanium silicalite-1 (TS-1, i.e., TS-1-B) with the lower urea dosage possesses more defective structure and unsaturated coordinated Ti sites verified by 29 Si nuclear magnetic resonance (NMR) and X-ray photoelectron spectroscopy (XPS) analysis, which results in a high initial activity and hydrogen efficiency; while the high surface acidity generated by these Ti species leads to a continuous decrease in the activity and the propylene oxide (PO) selectivity during the reaction. As the amount of urea gradually increases, the TS-1-B samples present the reduced surface defects and defective and unsaturated Ti species. Specially, TS-1-B-0.30U presents the weaker PO adsorption on PO-diffusion reflectance infrared Fourier transform spectra (DRIFTS), and thus results in the high stable PO formation rate and selectivity over its Au catalyst. Furthermore, a flat-plate-like shape with a shorter thickness of 100 nm along the b-axis direction is observed on the urea-modified TS-1. Compared with the conventional ellipsoidal TS-1 with crystal sizes of 200 and 500 nm, the flat-plate-like TS-1-0.30U displays the less surface defects, unsaturated Ti species, and the weaker Lewis acid, which is favorable for the desorption and intracrystalline diffusion of PO, thus reduces the occurrence of side reactions for the improved selectivity and stability. This work may provide a reference for developing titanium-containing materials with high activity and stability over HOPO reaction.

Using Ammonia Solution to Fabricate Highly Active Au/ Uncalcined TS‑1 Catalyst for Gas-Phase Epoxidation of Propylene

Uncalcined TS‐2 Immobilized Au Nanoparticles As a Bifunctional Catalyst to Boost Direct Propylene Epoxidation with H2 and O2

Towards highly stable and active Au / uncalcined TS-1 catalysts for direct propylene epoxidation with molecular H 2 and O 2 : Effect of Si / Ti molar ratio

Engineering Gold Impregnated Uncalcined TS‑1 to Boost Catalytic Formation of Propylene Oxide

Enhanced Catalytic Performance for Propene Epoxidation with H2 and O2 over Bimetallic Au–Ag/Uncalcined Titanium Silicate-1 Catalysts

Au/TS-1 catalyst for propylene epoxidation with H2 and O2: Effect of surface property and morphology of TS-1 zeolite

Phosphate-Modified Effects on Uncalcined TS-1-Immobilized Au Catalysts for Propylene Epoxidation with H<sub>2</sub> and O<sub>2</sub>

Surface Engineering and Kinetics Behaviors of Au/Uncalcined TS-1 Catalysts for Propylene Epoxidation with H2 and O2

Zeolite crystal size effects of Au/uncalcined TS-1 bifunctional catalysts on direct propylene epoxidation with H2 and O2

Au/TS-1 Catalyst Prepared by Deposition–precipitation Method for Propene Epoxidation with H2/O2: Insights into the Effects of Slurry Aging Time and Si/Ti Molar Ratio

Effect of Ag addition on performance of Au/TS-1-B catalyst in gas phase propylene epoxidation

Au/TS‐1 Catalyst for Propene Epoxidation with H2/O2: A Novel Strategy to Enhance Stability by Tuning Charging Sequence

Suppression of TS-1 Aggregation by Freeze-Drying to Enhance Au Dispersion for Propylene Epoxidation Using H2 and O2

Au Nanoparticles Deposited on the External Surfaces of Ts-1: Enhanced Stability and Activity for Direct Propylene Epoxidation with H-2 and O-2

A Novel and Simple Method Yields Highly Dispersed Au/TS-1 Catalysts for Enhanced Propylene Hydro-Oxidation.

Au/uncalcined TS-1 Catalysts for Direct Propene Epoxidation with H2 and O2: Effects of Si/Ti Molar Ratio and Au Loading

Manipulating the architecture of titanium silicalite-1 supported Au catalysts for direct propene epoxidation with H2 and O2

Combining trace Pt with surface silylation to boost Au/uncalcined TS ‐1 catalyzed propylene epoxidation with H 2 and O 2

Enhanced Stability for Propene Epoxidation with H2 and O2 over Wormhole-Like Hierarchical TS-1 Supported Au Nanocatalyst

Simultaneously Enhanced Stability and Selectivity for Propene Epoxidation with H2 and O2 on Au Catalysts Supported on Nano-Crystalline Mesoporous TS-1

Combining Trace Pt with Surface Silylation to Boost Au/uncalcined TS‐1 Catalyzed Propylene Epoxidation with H2 and O2