Abstract:The exhaust back pressure of diesel engines is becoming increasingly higher nowadays. In order to keep discharging exhaust unhindered and operating smoothly under high exhaust back pressure, a large reduction in engine maximum brake output is often observed, as well as increased fuel consumption and lower combustion efficiency with heavy exhaust smokes. In our previous study, "Applicability of Reducing Valve Timing Overlap for Diesel Engines under High Exhaust Back Pressure", a reduced valve timing overlap of 12 °CA partially improves the brake output and BSFC for a fixed-geometry turbocharged diesel engine under high exhaust back pressures. A potential solution for restoring the brake output under high exhaust back pressures could be the use of variable-geometry turbochargers. In this study, a variable-geometry turbocharger is applied to a diesel engine to study the engine performance characteristics and applicability, especially the further improvement of brake output and the brake-specific fuel consumption of the engine. Continuing with the results of our previous research, a basic setting of 12 °CA for the valve timing overlap is set up for the subsequent engine performance simulations in this study (using GT-Power SW). Via simulation, exhaust back pressures of 25 kPa, 45 kPa, and 65 kPa gauge are studied for a turbocharged diesel engine. The results for the engine parameters, including brake output, brake-specific fuel consumption, compressor outlet temperature, turbine inlet temperature, intake air mass flow rate, and exhaust mass flow rate are analyzed. The results of the variable-geometry turbocharger, including turbocharger speed, pressure ratios and efficiencies of compressor and turbine are also analyzed. The results indicate that the brake output and brake-specific fuel consumption are effectively improved under full-load operation with an adequate variable-geometry turbocharger rack position. Operable ranges of rack position are also set up for different back pressures.

Research on Exhaust Energy Distribution Regulation for Fuel Economy Improvement of Turbocompound Diesel Engine

Experimental study on the performance of a turbocompound diesel engine with variable geometry turbocharger

Research and application of the turbo-compound technology on a heavy duty diesel engine

Parametric Study of A Turbocompound Diesel Engine Based on an Analytical Model

Performance Analysis Of An Electric Turbocompounding System For A Hybrid Vehicle Diesel Engine

Study on Turbocompound System for a Heavy-Duty Diesel Engine by Combining Matching Analysis with Experiments

Numerical Study on Steam Injection in a Turbocompound Diesel Engine for Waste Heat Recovery

Simulation and Experimental Research on a Mixed Pulse Converter Turbocharging System

Experimental Study of the Influences of Operating Parameters on the Performance, Energy and Exergy Characteristics of a Turbocharged Marine Low-Speed Engine

Characteristic and Regulation Method of Parallel Turbocompound Engine with Steam Injection for Waste Heat Recovery

Numerical and Experimental Investigation of Exhaust Manifold Configurations of Turbo-Charged Diesel Engines

Experimental Study on Influence of High Exhaust Backpressure on Diesel Engine Performance Via Energy and Exergy Analysis

Comparative Study on Different Water/steam Injection Layouts for Fuel Reduction in a Turbocompound Diesel Engine

Dynamic Performance and Control Strategy of CO2-mixture Transcritical Power Cycle for Heavy-Duty Diesel Engine Waste-Heat Recovery

Applicability of Variable-Geometry Turbocharger for Diesel Generators under High Exhaust Back Pressure

Exhaust Energy Recovery with Variable Geometry Turbine to Reduce Fuel Consumption for Microcars

Turbocharging strategy among variable geometry turbine, two-stage turbine, and asymmetric two-scroll turbine for energy and emission in diesel engines

Study of Two-Stage Turbine Characteristic and Its Influence on Turbo-Compound Engine Performance

Potential of Carbon Dioxide Transcritical Power Cycle Waste-Heat Recovery Systems for Heavy-Duty Truck Engines

Different exhaust temperature management technologies for heavy-duty diesel engines with regard to thermal efficiency

Parametric study of power turbine for diesel engine waste heat recovery