Abstract:The Cu materials are playing an irreplaceable role in modern marine facilities, while one major issue affecting their service life is corrosion attack caused by external erosion of chloride ions, which leads to the quickly structural deterioration and reduced durability. To solve this obstinate issue, the corrosion−resistant Ni−based composite films with conductive Yttria–stabilized zirconia (YSZ, 2.5–15 g/L) and non−conductive Si 3 N 4 (2.5–15 g/L) reinforcing phases were composite–electrodeposited on Cu substrate in direct current (DC) mode. It was believed that the electrical differences of incorporated nanoparticles have a significant impact on nucleation and growth behaviors during electrodeposition, which further altered the structure and property of Ni−based composite films. Therefore, the emphasis of this study was to establish the correlation between obtained structure, electrochemical, and immersion corrosion performances at different incorporation levels of YSZ/Si 3 N 4 nanoparticles. The results demonstrate that by increasing the total doping contents, the Electrochemical Impedance Spectroscopy (EIS) and Chronoamperometry (CA) measurements exhibited an initial increase followed by a subsequent decrease on co−deposition dynamics, which was related to the dominant impact of conductive YSZ nanoparticle at electrocrystallization process. Meanwhile, the moderate incorporation level of 15 g/L offered effective control over structural compactness through dispersion−strengthening and grain−refining, and the same ratio of YSZ/Si 3 N 4 nanoparticles further maximized the improvement degree of microhardness, electrochemical passivation, and immersion stability of resulting films. Besides, the corrosion current density ( j corr ) of Ni−YSZ−Si 3 N 4 composite coating under optimum condition of 15 g/L was two orders of magnitude smaller than that of Cu substrate after long−term immersion test, and the corresponding polarization resistance ( R p ) also increased by 8.6 times. Overall, these substantial alterations obtained provide effective guideline for the design and preparation of corrosion−resistant Ni−based composite coating, which is beneficial to prolonging the service life of Cu components in saline environments.

Preparation of Ni-Cu Composite Coatings with Excellent Tribological Property and Corrosion Resistance by Doping OH-BN(h)-PA-Zn-DCD Hybrid

Study on mechanical and corrosion resistance of Ni-W-P composite coating reinforced by cationic cubic boron nitride

Study on Corrosion Behavior of Ni–P/Ni–Cu–P Superhydrophobic Composite Coatings Preparation on L360 Steel by Two-Step Method

Enhanced mechanical properties and corrosion resistance of electro-deposited NiCoP composite coatings with ZrB2 particle addition

A Ni-Cu/CuPP composite coating with good wear resistance and long-term corrosion resistance for seawater applications

Electrodeposition fabrication of corrosion−resistant Ni–based composite film on surface of Cu: Role of conductive YSZ and non−conductive Si 3 N 4 nanoparticles

Corrosion Behaviors and Mechanism of Electroless Ni-Cu-P/n-TiN Composite Coating

Preparation of laminar α-ZrP nanosheets enhanced Ni W nanocomposite coating and investigation of its mechanical and anti-corrosion properties

Study on the Corrosion Resistance of Superhydrophobic Ni-Co- P-BN(h) Nanocomposite Coatings Prepared by Electrochemical Machining and Fluorosilane Modification

Strengthening effect of α-ZrP nanosheet inclusions on corrosion resistance and wear resistance of Ni P deposits

Improved Corrosion Resistance and Increased Hardness of Copper Substrates from Cu-Ni/Ni-P Composite Coatings

Tribological Properties and Corrosion Resistance of Porous Structure Ni-Mo/ZrO2 Alloys

Preparation of (Ni-P) / (TiO2/ZnO) Composite Coating and its Anti-corrosion Behavior in Natural Seawater

Preparation and Corrosion Resistance of Ni-W-CF Composite Coating on P110 Steel

Strengthening the mechanical properties and corrosion resistance of Ni W coatings by PDA-functionalized h-BN nanosheets

Deposition Mechanism and Wear Resistance Nano Ni-Al2O3 Composite Coatings

Tribological properties of Ni-BP/Ni coatings produced by electroless co-deposition

Designing a Robust Ni-P/CeO2 Superhydrophobic Composite Coating for Synergistically Enhanced Corrosion Protection and Friction Reduction Performance

Impact of calcium zirconate nanoparticles on the mechanical and anti-corrosion properties of Ni-P coatings

Preparation of Ni-P-SiC Electroless Composite Coating with High Wear and Corrosion Resistance

Fabrication of a Ni/SiC Composite Coating on Steel Surface with Excellent Corrosion Inhibition Performance