Abstract:<div class="section abstract"><div class="htmlview paragraph">Compared to traditional vehicles, four-wheel independent drive and four-wheel independent steering (4WID-4WIS) vehicles have gained significant attention from researchers due to their enhanced control flexibility and superior handling performance. The steering angle deviation caused by dynamic toe angle changes in two-wheel steering (2WS) systems is often minimal and hence overlooked. However, the impact becomes notably significant in 4WIS systems. This article contrasts the tire slip angle differences between 2WS and 4WIS, and delves into the effects of dynamic toe angle variations on 4WIS control. Solutions are proposed both in terms of steering angle control and suspension design. Firstly, a dynamic model for the 4WID-4WIS vehicle is established. Secondly, a hierarchical tire force distribution strategy is designed for trajectory tracking. The upper layer utilizes a sliding mode controller and PID controller to determine the total required longitudinal, lateral forces, and yaw moment for tracking. The middle layer allocates these combined forces and moments to individual tires based on constraint optimization, while the lower layer determines vehicle torques and steering angles according to the longitudinal and lateral forces exerted by each tire. In terms of steering control, feedforward control with bump steer compensation is implemented to improve wheel steering precision and lateral tire force control accuracy. Considering the toe angle variations during cornering, critical hardpoint coordinates are identified and optimized through sensitivity analysis in the suspension design, aiming to reduce dynamic toe angle changes. Lastly, the effectiveness of these proposed strategies is validated under constant radius and slalom scenarios using the co-simulation of Carsim and Matlab/Simulink. Simulation results highlight that toe angle changes due to suspension kinematic characteristics play a significant role in 4WIS control. The strategies proposed in this article notably improved tire slip angle errors, demonstrating superior yaw rate responses and lateral tracking accuracy during trajectory following.</div></div>

Optimal 4WIS-4WID Vehicle Motion Control in Trajectory Deviation Occasions over Handling Limits.

NMPC-based Path Tracking Control Strategy for 4WID Autonomous Vehicle Considering Handling Stability Under Extreme Conditions

Robust path following control of 4WID autonomous vehicle with driving condition adaptive mechanism

Optimal allocation of tire force based on vehicle stability

Adaptive Fault-Tolerant Control for 4WID-4WIS Electric Vehicles under Steering System Failures

An Optimized Control Strategy Based on Hierarchical Design, 4WS-4WD, NMPC, and Nonlinear Dynamics Models

Optimal Control Method of Path Tracking for Four-Wheel Steering Vehicles

Lateral Stability Analysis of 4WID Electric Vehicle Based on Sliding Mode Control and Optimal Distribution Torque Strategy

Improve Handling Stability for Path Tracking of a 4WIS Vehicle Based on Sliding-mode Method

Impacts of Dynamic Toe Angle Variations on Four-Wheel Independent Steering Control and their Optimization Strategies

Path-following control of 4WIS/4WID autonomous vehicles considering vehicle stability based on phase plane

Optimized Handling Stability Control Strategy for a Four In-Wheel Motor Independent-Drive Electric Vehicle.

Path tracking coordinated control strategy for autonomous four in-wheel-motor independent-drive vehicles with consideration of lateral stability

Integrated longitudinal and lateral control for autonomous vehicles with active load transfer strategy at the handling limits

Trajectory tracking of four-wheel driving and steering autonomous vehicle under extreme obstacle avoidance condition

Minimum Lap Time Control for 4WIS&4WID Autonomous Vehicle with a Nonlinear Programming Method

Dynamic Decoupling and Trajectory Tracking for Automated Vehicles Based on the Inverse System

Time-Optimal Point Stabilization Control for WIP Vehicles Using Quasi-Convex Optimization and B-Spline Adaptive Interpolation Techniques

Design of Four Wheel Steering and Direct Yaw Moment Control for Unmanned Vehicle with Path Tracking Controller in Extreme Maneuvers

Optimal Design and Control of 4-IWD Electric Vehicles Based on a 14-DOF Vehicle Model

Nonlinear hierarchical control for four-wheel-independent-drive electric vehicle