Abstract:Broadband photodetectors (PDs) capable of multi-wavelength detection have garnered significant interest for applications in environmental monitoring, optical communication, spectral analysis, and imaging sensing. Low-bandgap Pb-Sn hybrid perovskite photodetectors can extend the spectral response from the ultraviolet-visible (UV-vis) range to the near-infrared (NIR) and reduce the toxicity associated with Pb2+. The strategic introduction of Sn2+ into Cs0.15FA0.85PbxSn1-xI3 (x = 1, 0.8, 0.6, 0.5, 0.4, 0.2, and 0) not only preserves the cubic crystal structure with conformal multigrain growth but also broadens the film's absorption spectrum from 800 to 1000 nm NIR region. This indicates a well-controlled tunability of the Pb-Sn binary perovskite system. Specifically, the self-powered photodetector with a device structure of ITO/NiOx/PTAA/Cs0.15FA0.85Pb0.5Sn0.5I3/PCBM/BCP/Ag has shown remarkable optoelectrical properties. It exhibits a high external quantum efficiency (EQE) of up to 80% across the spectrum from 300 to 1000 nm, a responsivity (R) exceeding 0.5 A/W, and high detectivity (D*) value of 1.04 x 1012 Jones at 910 nm and 3.38 x 1011 Jones at 1000 nm after weak attenuation. Intriguingly, the dark current of the Cs0.15FA0.85Pb0.5Sn0.5I3 device is four orders of magnitude lower than that of devices made with pristine Pb or Sn only, strongly correlating with its significantly increased built-in potential and reduced trap density. Consequently, it demonstrates a -3 dB bandwidth of 2.23 x 104 Hz, fast rise and decay times of 61 and 30 mu s, respectively, and a linear dynamic range (LDR) of 155 dB. Benefiting from its high sensitivity, a 5 x 5 PD array for NIR imaging and non-invasive pulse detection for photoplethysmography applications has been successfully demonstrated, showcasing the prosperous potential of Pb-Sn hybrid perovskite in the NIR range.image The rationally introduction of Sn2+ of the Cs0.15FA0.85PbxSn1-xI3 (x = 1, 0.8, 0.6, 0.5, 0.4, 0.2, and 0) could not only maintain the cubic crystal structure with conformal multigrain growth, but also expand the film absorption from 800 to 1000 nm near-infrared (NIR) region, reaching high external quantum efficiency (EQE) up to 80%. image

High-performance UV–Vis–NIR Photodetectors Based on Perovskite/pdpp3t Polymer Composites

Perovskite/Polymer Hybrid Thin Films for High External Quantum Efficiency Photodetectors with Wide Spectral Response from Visible to Near‐Infrared Wavelengths

High-Performance Near-Infrared Photodetectors Based on the Synergy Effect of Short Wavelength Light Filter and Long Wavelength Response of a Perovskite/Polymer Hybrid Structure

High-Performance Broadband Photodetectors Combining Perovskite and Organic Bulk Heterojunction Bifunctional Layers

Solution-Processed Ternary Perovskite-Conjugated Polymer Photodetector with a Photoresponse Up to 1200 Nm

High‐Performance MAPbI3/PM6:Y6 Perovskite/Organic Hybrid Photodetectors with a Broadband Response

Ultraviolet-Visible-Near-Infrared Broadband Photodetector Enabled by Cs2AgBiBr6: Sn/Conjugated Polymer Heterojunction

A broad-spectral-response perovskite photodetector with a high on/off ratio and high detectivity

A Flexible UV–Vis–NIR Photodetector Based on a Perovskite/Conjugated‐Polymer Composite

High Performance Solution-Processed Infrared Photodetector Based On Pbse Quantum Dots Doped With Low Carrier Mobility Polymer Poly(N-Vinylcarbazole)

Solution-Processed High-Detectivity Near-Infrared Polymer Photodetectors Fabricated by a Novel Low-Bandgap Semiconducting Polymer

Solution Processed and Highly Efficient UV-photodetector Based on CsPbBr3 Perovskite-Polymer Composite Film

High Performance Small Molecule Photodetector With Broad Spectral Response Range From 200 To 900 Nm

High Performance Near-infrared Organic Photodetectors Based on Narrow-bandgap Diketopyrrolopyrrole-based Polymer

A Design Strategy for Low‐Cost Single/Dual‐Band Photodetector: Bulk Heterojunction and Interface Engineering

Rational Composition Engineering for High-Quality Pb-Sn Photodetector Toward Sensitive Near-Infrared Digital Imaging Arrays

High Performance Photomultiplication Perovskite Photodetectors with PC60BM and NPB As the Interlayers

Room‐Temperature‐Operated Ultrasensitive Broadband Photodetectors by Perovskite Incorporated with Conjugated Polymer and Single‐Wall Carbon Nanotubes

High responsivity VIS-NIR photodetector based on (PEA)2PbI4/P3HT Heterojunction

High-Performance Broadband Perovskite Photodetectors Based on Ch3nh3pbi3/C8btbt Heterojunction

Electrically Modulated Near-Infrared/Visible Light Dual-Mode Perovskite Photodetectors