Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The thermal error stability (STE) of the spindle seriously affects the machining accuracy of a machine tool, however existing empirical heating model-based active cooling strategies mainly focus on suppressing the spindle's overall thermal deformation and cannot effectively stabilize the thermal error. This study regards the "active cooling-spindle" system as a feedback control system and employs a data-driven thermal error model to provide feedback. Thus, the spindle thermal error can be stabilized for a long time owing to the homeostasis of the feedback control system under disturbance. A mechanical spindle with an external cooling scheme is taken as the study object. Bearings are the primary heat sources of the mechanical spindle; thus, the angular contact ball-bearing heat generation is precisely modeled based on local heat sources analysis of bearing components, elastohydrodynamic lubrication, and micro-contact theory. Thermal simulation of the spindle under varying-coolant temperature cooling is conducted to pre-validate the thermal error suppression and variation trend influencing effect, and obtain the Reference Input of Thermal Error (RITE) for the feedback control under different work conditions. Subsequently, a spindle thermal error feedback control system is developed, including computation, cooling, and real-time monitoring modules with inter-communication. Finally, the thermal error feedback control strategy is applied on the mechanical spindle, and experimental comparisons with constant coolant temperature cooling show that the thermal equilibrium time is advanced by 61.46%, 59.16%, 40.51%, and 58.08%. The thermal error variation range (TEVR) after the preheating stage is reduced to1.92, 1.52, 1.91, and 1.69 μm, respectively. The significant reduction in TEVR validated the effectiveness of the proposed strategy for spindle thermal error stabilization.

Theoretical and Experimental Study on Rotating Heat Pipe Towards Thermal Error Control of Motorized Spindle

Effect of Gas–liquid Phase Change of Axial Rotating Heat Pipe on Fluid-Thermal-solid Behaviors of High-Speed Spindle

Numerical study on two-phase flow and heat transfer characteristics of loop rotating heat pipe for cooling motorized spindle

Regulation of Thermo-Fluid-solid Coupling Characteristics in High-Speed Spindle-Bearing System for Boring Machine Tool Based on Sintered-Core Heat Pipes

Experimental study on dynamic characteristics of cylindrical horizontal axially rotating heat pipe

Investigation on a Grinding Motorized Spindle with Miniature-Revolving-heat-pipes Central Cooling Structure

Performance investigation on rotating heat pipes under high rotation speed and hypergravity

Thermoelectric-based cooling system for high-speed motorized spindle I: design and control mechanism

Study on Parameters of T-type Cooling System for Motorized Spindle Based on Thermal Characteristics

Feedback control of the mechanical spindle thermal error based on thermal simulation with bearing heat sources analysis

Effect of Tilt Angle and Base Plate Design on the Performance of a Loop Heat Pipe Driven by Vapor–liquid Injector

Research on the Effect of Heat Pipe Inclination Angle on Temperature Distribution in Electrical Machines

Application Study and Special Structure Design for Rotating Heat Pipes

Investigation on Heat Transfer Performance of Loop Thermosyphon for Inner Cooling of Motorized Spindle

Experimental Investigation of Heat Pipe Inclination Angle Effect on Temperature Nonuniformity in Electrical Machines

Experimental Investigation of an R600a Two-Phase Loop Thermosiphon to Cool a Motorized Spindle Shaft

Experimental study on heat transfer performance of axially rotating heat pipe in steady state

Experimental investigation on a flat loop heat pipe coupled with thermoelectric cooler

A Central Cooling Structure for Motorized Spindles: Principle and Application

Experimental and numerical investigation on a novel heat pipe based cooling strategy for permanent magnet synchronous motors

Effectiveness of Thermal Interface Materials on Electrical Machines Thermal Performance with Heat Pipes