Abstract:Flow chart for the preparation of PEN‐based composite films. Thermal conductive polymer‐based composites synchronously with stable dielectric and excellent mechanical properties are urgently needed for high‐temperature‐resistant electronic devices. Here, a significant improvement in the thermal conductivity (TC), thermal stability, dielectric, and mechanical performance was simultaneously achieved in the polyarylene ether nitrile (PEN)/divinyl siloxane‐bisbenzocyclobutene (BCB) matrix through the incorporation of boron nitride nanosheets (BNNS) combined together with the post‐solid phase chemical reaction technique. The significant increase in the effective filler‐filler and filler‐crystal contacts in the composites was the main reason for the improvement in TC and dielectric constant. Besides, glass transition temperature (Tg) and mechanicals were enhanced in the presence of cross‐linked networks. By synchronously adding 15 vol% BNNS, the TC of composites after treatment reached up to 5.582 W/m.K, enhanced by 4.4 times higher than untreated. The dielectric constant was down to 2.93 at 1 MHz and the loss remained at a relatively low level. Meanwhile, the composite showed significantly enhanced thermal stability, mechanicals, and hydrophobicity (Tg = 336°C, T5% = 529°C, tensile strength and modulus was 94.5 MPa and 5.3 GPa, respectively, the contact angle was 101.76°). Thus, it promotes an effective strategy for fabricating a high‐performance‐polymer composite, which has the potential used in electronic materials. Highlights Crystallization‐crosslinking strategy optimizes overall performance. Crystals fill gaps between BNNS layers and connect thermal conductive pathway. Crosslinked networks limit molecular chain motion to reduce phonon scattering. The highest TC of the PEN/BCB/BNNS composite is up to 7.451 W/m.K. Thermal property shows significant improvement after crosslinking especially Tg.

Polyarylene Ether Nitrile Composites Film with Self-Reinforcing Effect by Cross-Linking and Crystallization Synergy

Fabrication of Crosslinked Single-Component Polyarylene Ether Nitrile Composite with Enhanced Dielectric Properties

Crosslinked polyarylene ether nitrile film as flexible dielectric materials with ultrahigh thermal stability

Self-Toughening And Self-Enhancement Poly(Arylene Ether Nitrile) With Low Dielectric Constant By Solid Crosslinking Reaction

Polyarylene ether nitrile/divinyl siloxane‐bisbenzocyclobutene composite films: Curing reaction and thermal/mechanical/dielectric properties

Substantial improvement of thermal conductivity and mechanical properties of polymer composites by incorporation of boron nitride nanosheets and modulation of thermal curing reaction

Cross-linked porous polyarylene ether nitrile films with ultralow dielectric constant and superior mechanical properties

Preparation and Performance of PEN-OH@BNNS-OH/PEN Interlayer Dielectric Films with Superior Interfacial Compatibility

Effect of Nitrile-Functionalization and Thermal Cross-Linking on the Dielectric and Mechanical Properties of PEN/CNTs–CN Composites

Interfacial crosslinking enabled super-engineering polymer-based composites with ultra-stable dielectric properties beyond 350 °C

Enhancing high-temperature energy storage performance of poly(arylene ether nitrile) hybrids synergistically via phthalonitrile modified boron nitride and carbon nanotube

Effect of Surface Functionalization on the Properties (rheological, Mechanical, and Dielectric) and Microtopography of PEN/CPEN-f-CNTs Nanocomposites

In Situ Catalyzed and Reinforced High‐temperature Flexible Crosslinked ZnO Nano‐whisker/polyarylene Ether Nitriles Composite Dielectric Films

Strong and Tough Semi-Crystalline Poly(aryl Ether Nitrile) with Low Coefficient of Thermal Expansion

Enhanced Thermal and Dielectric Properties of Polyarylene Ether Nitrile Nanocomposites Incorporated with BN/TiO2-Based Hybrids for Flexible Dielectrics

Advanced Composites Based on End-Capped Polyarylene Ether Nitrile/bisphthalonitrile with Controllable Thermal Curing Reaction

Design and properties of polyarylene ether nitrile copolymers with improved elongation at break

Effect of Carbon Nanotubes on the Crystallization and Properties of Semi-Crystalline Polyarylene Ether Nitrile

Fabrication of Low Dielectric Constant Fluorinated Poly(arylene Ether Nitrile) Composites by Cross-Linking with Metal-Organic Frameworks

Highly efficient thermal conductivity of polyarylene ether nitrile composites via the introduction of hybrid fillers and tailored cross-linked structure

Crosslinked Polyarylene Ether Nitrile Interpenetrating with Zinc Ion Bridged Graphene Sheet and Carbon Nanotube Network