Abstract:No AccessTechnical NoteWavelet Analysis of the Far-Field Sound Pressure Signals Generated from a High-Lift ConfigurationLing Li, Peiqing Liu, Yu Xing and Hao GuoLing LiBeihang University, 100191 Beijing, People's Republic of China, Peiqing LiuBeihang University, 100191 Beijing, People's Republic of China, Yu XingBeihang University, 100191 Beijing, People's Republic of China and Hao GuoBeihang University, 100191 Beijing, People's Republic of ChinaPublished Online:23 Sep 2017https://doi.org/10.2514/1.J056160SectionsRead Now ToolsAdd to favoritesDownload citationTrack citations ShareShare onFacebookTwitterLinked InRedditEmail About References [1] Casalino D., Diozzi F., Sannino R. and Paonessa A., "Aircraft Noise Reduction Technologies: A Bibliographic Review," Aerospace Science and Technology, Vol. 12, No. 1, 2008, pp. 1–17. doi:https://doi.org/10.1016/j.ast.2007.10.004 CrossrefGoogle Scholar[2] Dobrzynski W., "Almost 40 Years of Airframe Noise Research: What Did We Achieve?" Journal of Aircraft, Vol. 47, No. 2, 2010, pp. 353–367. doi:https://doi.org/10.2514/1.44457 LinkGoogle Scholar[3] Filippone A., "Aircraft Noise Prediction," Progress in Aerospace Sciences, Vol. 68, No. 8, July 2014, pp. 27–63. doi:https://doi.org/10.1016/j.paerosci.2014.02.001 CrossrefGoogle Scholar[4] Li Y., Wang X. and Zhang D., "Control Strategies for Aircraft Airframe Noise Reduction," Chinese Journal of Aeronautics, Vol. 26, No. 2, 2013, pp. 249–260. doi:https://doi.org/10.1016/j.cja.2013.02.001 CrossrefGoogle Scholar[5] Roger M. and Pérennès S., "Low-Frequency Noise Sources in Two-Dimensional High-Lift Devices," 6th Aeroacoustics Conference and Exhibit, AIAA Paper 2000-1972, June 2000. LinkGoogle Scholar[6] Khorrami M. R., Singer B. A. and Berkman M. E., "Time-Accurate Simulations and Acoustic Analysis of Slat Free Shear Layer," AIAA Journal, Vol. 40, No. 7, 2002, pp. 1284–1291. doi:https://doi.org/10.2514/2.1817 LinkGoogle Scholar[7] Yamamoto K., Imamura T. and Yokokawa Y., "Progress on Experimental and Numerical Research for Slat Noise in JAXA," International Journal of Aeroacoustics, Vol. 10, No. 4, 2011, pp. 443–463. doi:https://doi.org/10.1260/1475-472X.10.4.443 CrossrefGoogle Scholar[8] Hein S., Hohage T., Koch W. and Schöberl J., "Acoustic Resonances in a High-Lift Configuration," Journal of Fluid Mechanics, Vol. 582, July 2007, pp. 179–202. doi:https://doi.org/10.1017/S0022112007005770 CrossrefGoogle Scholar[9] Terracol M., Manoha E. and Lemoine B., "Investigation of the Unsteady Flow and Noise Generation in a Slat Cove," AIAA Journal, Vol. 54, No. 2, 2016, pp. 469–489. doi:https://doi.org/10.2514/1.J053479 LinkGoogle Scholar[10] Deck S. and Laraufie R., "Numerical Investigation of the Flow Dynamics Past a Three-Element Aerofoil," Journal of Fluid Mechanics, Vol. 732, Oct. 2013, pp. 401–444. doi:https://doi.org/10.1017/jfm.2013.363 CrossrefGoogle Scholar[11] Pott-Pollenske M., Dobrzynski W., Buchholz H., Gehlhar B. and Walle F., "Validation of a Semiempirical Airframe Noise Prediction Method Through Dedicated A319 Flyover Noise Measurements," 8th AIAA/CEAS Aeroacoustics Conference and Exhibit, AIAA Paper 2002-2470, June 2002. LinkGoogle Scholar[12] Makiya S., Inasawa A. and Asai M., "Vortex Shedding and Noise Radiation from a Slat Trailing Edge," AIAA Journal, Vol. 48, No. 2, 2010, pp. 502–509. doi:https://doi.org/10.2514/1.45777 LinkGoogle Scholar[13] Plogmann B., Herrig A. and Würz W., "Experimental Investigations of a Trailing Edge Noise Feedback Mechanism on a NACA 0012 Airfoil," Experiments in Fluids, Vol. 54, No. 5, 2013, pp. 1–14. doi:https://doi.org/10.1007/s00348-013-1480-z CrossrefGoogle Scholar[14] Desquesnes G., Terracol M. and Sagaut P., "Numerical Investigation of the Tone Noise Mechanism over Laminar Airfoils," Journal of Fluid Mechanics, Vol. 591, Nov. 2007, pp. 155–182. doi:https://doi.org/10.1017/S0022112007007896 CrossrefGoogle Scholar[15] Padois T., Laffay P., Idier A. and Moreau S., "Tonal Noise of a Controlled-Diffusion Airfoil at Low Angle of Attack and Reynolds Number," Journal of the Acoustical Society of America, Vol. 140, No. 1, 2016, pp. 113–118. doi:https://doi.org/10.1121/1.4958916 CrossrefGoogle Scholar[16] Pröbsting S., Serpieri J. and Scarano F., "Experimental Investigation of Aerofoil Tonal Noise Generation," Journal of Fluid Mechanics, Vol. 747, No. 2, 2014, pp. 656–687. doi:https://doi.org/10.1017/jfm.2014.156 CrossrefGoogle Scholar[17] Pröbsting S., Scarano F. and Morris S. C., "Regimes of Tonal Noise on an Airfoil at Moderate Reynolds Number," Journal of Fluid Mechanics, Vol. 780, Oct. 2015, pp. 407–438. doi:https://doi.org/10.1017/jfm.2015.475 CrossrefGoogle Scholar[18] Pröbsting S. and Yarusevych S., "Laminar Separation Bubble Development on an Airfoil Emitting Tonal Noise," Journal of Fluid Mechanics, Vol. 780, Oct. 2015, pp. 167–191. doi:https://doi.org/10.1017/jfm.2015.427 CrossrefGoogle Scholar[19] Liu P. Q., Xing Y., Guo H. and Li L., "Design and Performance of a Small-Scale Aeroacoustic Wind Tunnel," Applied Acoustics, Vol. 116, Jan. 2017, pp. 65–69. doi:https://doi.org/10.1016/j.apacoust.2016.09.014 CrossrefGoogle Scholar[20] Remillieux M. C., Camargo H. E., Ravetta P. A., Burdisso R. A. and Ng W. F., "Novel Kevlar-Walled Wind Tunnel for Aeroacoustic Testing of a Landing Gear," AIAA Journal, Vol. 46, No. 7, 2008, pp. 1631–1639. doi:https://doi.org/10.2514/1.33082 LinkGoogle Scholar[21] Devenport W. J., Burdisso R. A., Borgoltz A., Ravetta P. A., Barone M. F., Brown K. A. and Morton M. A., "The Kevlar-Walled Anechoic Wind Tunnel," Journal of Sound and Vibration, Vol. 332, No. 17, 2013, pp. 3971–3991. doi:https://doi.org/10.1016/j.jsv.2013.02.043 CrossrefGoogle Scholar[22] Choudhari M. M., Khorrami M. R. and Lockard D. P., "Slat Cove Noise: 30P30N 3-Element, Simplified High-Lift Configuration (Modified Slat)," Guidelines for Catfegory 7 of BANC-II Workshop, 2012, https://info.aiaa.org/tac/ASG/FDTC/DG/BECAN_files_/BANCII_category7/Summary_Category_7_Slat_Noise_30P30N.pdf. Google Scholar[23] Choudhari M. M. and Lockard D. P., "Assessment of Slat Noise Predictions for 30P30N High-Lift Configuration from BANC-III Workshop," 21st AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2015-2844, 2015. LinkGoogle Scholar[24] Torrence C. and Compo G. P., "A Practical Guide to Wavelet Analysis," Bulletin of the American Meteorological Society, Vol. 79, No. 1, 1998, pp. 61–78. doi:https://doi.org/10.1175/1520-0477(1998)079<0061:APGTWA>2.0.CO;2 CrossrefGoogle Scholar[25] Kegerise M. A., Spina E. F., Garg S. and Cattafesta L. N., "Mode-Switching and Nonlinear Effects in Compressible Flow over a Cavity," Physics of Fluids, Vol. 16, No. 3, 2004, pp. 678–687. doi:https://doi.org/10.1063/1.1643736 CrossrefGoogle Scholar[26] Jordan D., Miksad R. W. and Powers E. J., "Implementation of the Continuous Wavelet Transform for Digital Time Series Analysis," Review of Scientific Instruments, Vol. 68, No. 3, 1997, pp. 1484–1494. doi:https://doi.org/10.1063/1.1147636 CrossrefGoogle Scholar[27] Farge M., "Wavelet Transforms and their Applications to Turbulence," Annual Review of Fluid Mechanics, Vol. 24, 1992, pp. 395–458. doi:https://doi.org/10.1146/annurev.fl.24.010192.002143 CrossrefGoogle Scholar[28] Mamdan M. N., Jubran B. A., Shabaneh N. H. and Abu-samak M., "Comparison of Various Basic Wavelets for the Analysis of Flow-Induced Vibration of a Cylinder in Cross Flow," Journal of Fluids and Structures, Vol. 10, No. 6, 1996, pp. 633–651. doi:https://doi.org/10.1006/jfls.1996.0042 CrossrefGoogle Scholar[29] Gloerfelt X., Bogey C. and Bailly C., "Numerical Evidence of Mode Switching in the Flow-Induced Oscillations by a Cavity," International Journal of Aeroacoustics, Vol. 2, No. 2, 2003, pp. 193–217. doi:https://doi.org/10.1260/147547203322775533 CrossrefGoogle Scholar[30] Cattafesta L. N., Garg S., Kegerise M. S. and Jones G. S., "Experiments on Compressible Flow-Induced Cavity Oscillations," 29th AIAA Fluid Dynamics Conference, AIAA Paper 1998-2912, 1998. doi:https://doi.org/10.2514/6.1998-2912 LinkGoogle Scholar Previous article Next article FiguresReferencesRelatedDetailsCited byExperimental Study of Far-Field Aerodynamic Noise Characteristics of Serrated SlatJournal of Aerospace Engineering, Vol. 36, No. 1Time–frequency characteristics of noise generated from different slat and flap geometrical configurations of the high-lift deviceApplied Acoustics, Vol. 197An experimental study of tonal noise from a wind turbine airfoil with flat plate serrationsApplied Acoustics, Vol. 191Effect of a Variable-Bend Slat on Tones Due to the Cove's Self-Excited OscillationJournal of Aerospace Engineering, Vol. 34, No. 6Aeroacoustic characteristics of slat finletsPhysics of Fluids, Vol. 33, No. 9GPU CABARET Solutions for 30P30N Three-element High-lift Airfoil with Slat Modifications.Anton P. Markesteijn, Hasan Kamliya Jawahar, Sergey A. Karabasov and Mahdi Azarpeyvand28 July 2021Vortex dynamics for flow around the slat cove at low Reynolds numbers26 May 2021 | Journal of Fluid Mechanics, Vol. 919Financial Time Series Image Algorithm Based on Wavelet Analysis and Data FusionJournal of Sensors, Vol. 2021Intermittent and stochastic characteristics of slat tonesPhysics of Fluids, Vol. 33, No. 2Serrated slat cusp for high-lift device noise reductionPhysics of Fluids, Vol. 33, No. 1Experimental Investigation of the Far-Field Noise Generated from the Cruise Configuration of Aircraft High-Lift DeviceJournal of Aerospace Engineering, Vol. 33, No. 5Aerodynamic and aeroacoustic performance of high-lift airfoil fitted with slat cove fillersJournal of Sound and Vibration, Vol. 479Aerodynamic and Aeroacoustic Performance of High-lift Airfoil with Serrated Slat CuspHasan Kamliya Jawahar, Syamir A. S, Mahdi Azarpeyvand and Carlos Ilario8 June 2020Intermittency analysis of high-lift airfoil with slat cove fillersHasan Kamliya Jawahar, Stefano Meloni, Mahdi Azarpeyvand, Roberto Camussi and Carlos Ilario8 June 2020Flow characteristics of slat cove fillersAerospace Science and Technology, Vol. 100Wavelet analysis of multiple tonal phenomena generated from a simplified nose landing gear and a ring cavityJournal of Sound and Vibration, Vol. 464Numerical Investigation of High-lift Airfoil Fitted with Slat Cove FillerHasan Kamliya Jawahar, Mahdi Azarpeyvand and Carlos Silva18 May 2019Aeroacoustic Performance of High-lift Airfoil with Slat Cove FillersHasan Kamliya Jawahar, Syamir A. Showkat Ali, Mahdi Azarpeyvand and Carlos Silva18 May 2019 What's Popular Volume 56, Number 1January 2018 CrossmarkInformationCopyright © 2017 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved. All requests for copying and permission to reprint should be submitted to CCC at www.copyright.com; employ the ISSN 0001-1452 (print) or 1533-385X (online) to initiate your request. See also AIAA Rights and Permissions www.aiaa.org/randp. TopicsAerodynamic PerformanceAerodynamicsAeronautical EngineeringAeronauticsAviationAviation NoiseAviation SafetyBoundary LayersEnvironmental Impact of AviationFlight TestFluid DynamicsTurbulenceVortex DynamicsWind Tunnels KeywordsFreestream VelocityAngle of AttackFeedback LoopLaminar Boundary LayerHigh Lift DeviceContinuous WaveletsWind TunnelsShort Time Fourier TransformAcoustic PhenomenaTollmien Schlichting wavesAcknowledgmentsThis work was supported by the National Natural Science Foundation of China (grant 11772033) and the China–European Union Aeronautical Science & Technology Cooperation Project DRAGY.PDF Received16 March 2017Accepted16 August 2017Published online23 September 2017

Abstract:No AccessTechnical NotesOptimal Tolerance Allocation in Blade Manufacturing by Sensitivity-Based Performance Impact EvaluationJiaqi Luo, Yao Zheng and Feng LiuJiaqi LuoZhejiang University, 310027 Hangzhou, People’s Republic of China*Principal Investigator, School of Aeronautics and Astronautics; .Search for more papers by this author, Yao ZhengZhejiang University, 310027 Hangzhou, People’s Republic of China†Professor, School of Aeronautics and Astronautics; .Search for more papers by this author and Feng LiuUniversity of California, Irvine, Irvine, California 92697-3975‡Professor, Department of Mechanical and Aerospace Engineering; . Fellow AIAA.Search for more papers by this authorPublished Online:18 May 2020https://doi.org/10.2514/1.B37718SectionsRead Now ToolsAdd to favoritesDownload citationTrack citations ShareShare onFacebookTwitterLinked InRedditEmail About References [1] Bammert K. and Sandstede H., “Influence of Manufacturing Tolerances and Surface Roughness of Blades on the Performance of Turbines,” Journal of Engineering for Power, Vol. 98, No. 1, 1976, pp. 29–36. https://doi.org/10.1115/1.3446107 CrossrefGoogle Scholar[2] Roelke R. and Haas J., “The Effect of Rotor Blade Thickness and Surface Finish on the Performance of a Small Axial Flow Turbine,” Journal of Engineering for Power, Vol. 105, No. 2, 1983, pp. 377–382. https://doi.org/10.1115/1.3227426 Google Scholar[3] Garzon V. and Darmofal D., “Impact of Geometric Variability on Axial Compressor Performance,” Journal of Turbomachinery, Vol. 125, No. 4, 2003, pp. 692–703. https://doi.org/10.1115/1.1622715 CrossrefGoogle Scholar[4] Dong Z., Hu W. and Xue D., “New Production Cost-Tolerance Models for Tolerance Synthesis,” Journal of Engineering for Industry, Vol. 116, No. 2, 1994, pp. 199–206. https://doi.org/10.1115/1.2901931 Google Scholar[5] Edwards R., Asghar A., Woodason R., LaViolette M., Goni Boulama K. and Allan W., “Numerical Investigation of the Influence of Real World Blade Profile Variations on the Aerodynamic Performance of Transonic Nozzle Guide Vanes,” Journal of Turbomachinery, Vol. 134, No. 2, 2012, Paper 021014. https://doi.org/10.1115/1.4003050 Google Scholar[6] Lange A., Voigt M., Vogeler K., Schrapp H., Johann E. and Gümmer V., “Impact of Manufacturing Variability on Multistage High-Pressure Compressor Performance,” Journal of Engineering for Gas Turbines and Power, Vol. 134, No. 11, 2012, Paper 112601. https://doi.org/10.1115/1.4007167 Google Scholar[7] Schnell R., Lengyel-Kampmann T. and Nicke E., “On the Impact of Geometric Variability on Fan Aerodynamic Performance, Unsteady Blade Row Interaction, and Its Mechanical Characteristics,” Journal of Turbomachinery, Vol. 136, No. 9, 2014, Paper 091005. https://doi.org/10.1115/1.4027218 CrossrefGoogle Scholar[8] Parussini L., Pediroda V. and Poloni C., “Prediction of Geometric Uncertainty Effects on Fluid Dynamics by Polynomial Chaos and Fictitious Domain Method,” Computers and Fluids, Vol. 39, No. 1, 2010, pp. 137–151. https://doi.org/10.1016/j.compfluid.2009.07.008 CrossrefGoogle Scholar[9] Dow E. and Wang Q., “The Implications of Tolerance Optimization on Compressor Blade Design,” Journal of Turbomachinery, Vol. 137, No. 10, 2015, Paper 101008. https://doi.org/10.1115/1.4030791 Google Scholar[10] Zamboni G., Banks G. and Bather S., “Gradient-Based Adjoint and Design of Experiment CFD Methodologies to Improve the Manufacturability of High Pressure Turbine Blades,” ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, ASME Paper GT2016-56042, Fairfield, NJ, 2016. https://doi.org/10.1115/GT2016-56042 Google Scholar[11] Yang J., Xiong J., McBean I., Havakechian S., Liu F. and Luo J., “Performance Impact of Manufacturing Variations for Multistage Steam Turbines,” Journal of Propulsion and Power, Vol. 33, No. 4, 2017, pp. 1031–1036. https://doi.org/10.2514/1.B36022 LinkGoogle Scholar[12] Jameson A., “Aerodynamic Design via Control Theory,” Journal of Scientific Computing, Vol. 3, No. 3, 1988, pp. 233–260. https://doi.org/10.1007/BF01061285 CrossrefGoogle Scholar[13] Luo J., Xiong J., McBean I. and Liu F., “Three-Dimensional Aerodynamic Design Optimization of a Turbine Blade by Using an Adjoint Method,” Journal of Turbomachinery, Vol. 133, No. 1, 2011, Paper 011026. https://doi.org/10.1115/1.4001166 CrossrefGoogle Scholar[14] Marta A. and Shankaran S., “Assessing Turbomachinery Performance Sensitivity to Boundary Conditions Using Control Theory,” Journal of Propulsion and Power, Vol. 30, No. 5, 2014, pp. 1281–1294. https://doi.org/10.2514/1.B35087 LinkGoogle Scholar[15] Walther B. and Nadarajah S., “Adjoint-Based Constrained Aerodynamic Shape Optimization for Multistage Turbomachines,” Journal of Propulsion and Power, Vol. 31, No. 5, 2015, pp. 1298–1319. https://doi.org/10.2514/1.B35433 LinkGoogle Scholar[16] Aissa M., Maffuli R., Mueller L. and Verstraete T., “Optimisation of a Turbine Inlet Guide Vane by Gradient-Based and Metamodel-Assisted Methods,” International Journal of Computational Fluid Dynamics, Vol. 33, Nos. 6–7, 2019, pp. 302–316. https://doi.org/10.1080/10618562.2019.1683168 CrossrefGoogle Scholar[17] Ghate D. and Giles M., “Efficient Hessian Calculation Using Automatic Differentiation,” 25th AIAA Applied Aerodynamics Conference, AIAA Paper 2007-4059, 2007. https://doi.org/10.2514/6.2007-4059 LinkGoogle Scholar[18] Rumpfkeil M. and Mavriplis D., “Efficient Hessian Calculations Using Automatic Differentiation and the Adjoint Method with Applications,” AIAA Journal, Vol. 48, No. 10, 2010, pp. 2406–2417. https://doi.org/10.2514/1.J050451 LinkGoogle Scholar[19] Papadimitriou D. and Giannakoglou K., “Computation of the Hessian Matrix in Aerodynamic Inverse Design Using Continuous Adjoint Formulations,” Computers and Fluids, Vol. 37, No. 8, 2008, pp. 1029–1039. https://doi.org/10.1016/j.compfluid.2007.11.001 CrossrefGoogle Scholar[20] Papadimitriou D. and Giannakoglou K., “Direct, Adjoint and Mixed Approaches for the Computation of Hessian in Airfoil Design Problems,” International Journal for Numerical Methods in Fluids, Vol. 56, No. 10, 2008, pp. 1929–1943. https://doi.org/10.1002/(ISSN)1097-0363 CrossrefGoogle Scholar[21] Hicken J. E., “Inexact Hessian-Vector Products in Reduced-Space Differential-Equation Constrained Optimization,” Optimization and Engineering, Vol. 15, No. 3, 2014, pp. 575–608. https://doi.org/10.1007/s11081-014-9258-6 CrossrefGoogle Scholar[22] Shi-Dong D. and Nadarajah S., “Approximate Hessian for Accelerated Convergence of Aerodynamic Shape Optimization Problems in an Adjoint-Based Framework,” Computers and Fluids, Vol. 168, May 2018, pp. 265–284. https://doi.org/10.1016/j.compfluid.2018.04.019 CrossrefGoogle Scholar[23] Schillings C., Schimidt S. and Schulz V., “Efficient Shape Optimization for Certain and Uncertain Aerodynamic Design,” Computers and Fluids, Vol. 46, No. 1, 2011, pp. 78–87. https://doi.org/10.1016/j.compfluid.2010.12.007 CrossrefGoogle Scholar[24] Papadimitriou D. and Papadimitriou C., “Aerodynamic Shape Optimization for Minimum Robust Drag and Lift Reliability Constraint,” Aerospace Science and Technology, Vol. 55, Aug. 2016, pp. 24–33. https://doi.org/10.1016/j.ast.2016.05.005 CrossrefGoogle Scholar[25] Luo J. and Liu F., “Performance Impact of Manufacturing Tolerances for a Turbine Blade Using Second Order Sensitivities,” ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, ASME Paper GT2018-75999, Fairfield, NJ, 2018. https://doi.org/10.1115/GT2018-75999 Google Scholar[26] Luo J. and Liu F., “Statistical Evaluation of Performance Impact of Manufacturing Variability by an Adjoint Method,” Aerospace Science and Technology, Vol. 77, June 2018, pp. 471–484. https://doi.org/10.1016/j.ast.2018.03.030 CrossrefGoogle Scholar[27] Pini M. and Cinnella P., “Hybrid Adjoint-Based Robust Optimization Approach for Fluid-Dynamics Problems,” 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2013-1814, 2013. https://doi.org/10.2514/6.2013-1814 Google Scholar Previous article Next article FiguresReferencesRelatedDetailsCited byCompressor geometric uncertainty quantification under conditions from near choke to near stallChinese Journal of Aeronautics, Vol. 36, No. 3Uncertainty analysis of global and local performance impact of inflow and geometric uncertainties using sparse grid-based non-intrusive polynomial chaos15 April 2022 | Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol. 236, No. 7A data-driven non-intrusive polynomial chaos for performance impact of high subsonic compressor cascades with stagger angle and profile errorsAerospace Science and Technology, Vol. 129Performance dispersion control of a multistage compressor based on precise identification of critical featuresAerospace Science and Technology, Vol. 129A gradient-based method assisted by surrogate model for robust optimization of turbomachinery bladesChinese Journal of Aeronautics, Vol. 35, No. 10Stochastic aerodynamic analysis for compressor blades with manufacturing variability based on a mathematical dimensionality reduction method29 December 2021 | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 236, No. 10Robust design optimization considering inlet flow angle variations of a turbine cascadeAerospace Science and Technology, Vol. 116 What's Popular Volume 36, Number 4July 2020 CrossmarkInformationCopyright © 2020 by Jiaqi Luo, Yao Zheng, and Feng Liu. Published by the American Institute of Aeronautics and Astronautics, Inc., with permission. All requests for copying and permission to reprint should be submitted to CCC at www.copyright.com; employ the eISSN 1533-3876 to initiate your request. See also AIAA Rights and Permissions www.aiaa.org/randp. TopicsAerodynamic PerformanceAerodynamicsAeronautical EngineeringAeronauticsComputational Fluid DynamicsEquations of Fluid DynamicsFinite Difference MethodFinite Element MethodFlow RegimesFluid DynamicsMonte Carlo MethodNumerical Analysis KeywordsShape FunctionsTurbomachinerySteam TurbinesAerodynamic Shape OptimizationAerodynamic PerformanceEuler EquationsExternal FlowsComputational Fluid DynamicsSingular Value DecompositionFinite Difference MethodAcknowledgmentsThe authors would like to thank the National Natural Science Foundation of China (grant nos. 51676003 and 51976183) and the Fundamental Research Funds for the Central Universities of China (grant no. 2019QNA4058) for supporting the research work.PDF Received26 June 2019Accepted19 April 2020Published online18 May 2020

Convolution for Haystacking in Turbulence-Ingesting Rotor Noise

Mach Number Effect of Compressible Flow Around A Circular Cylinder

Performance Impact of Manufacturing Variations for Multistage Steam Turbines

Equivalence Between Schwarzschild and Wiener-Hopf Solutions for Flat Plate Trailing-Edge Scattering

Wavelet Analysis of the Far-Field Sound Pressure Signals Generated from a High-Lift Configuration

Multi-Objective Optimization of a Transonic Compressor Rotor by Using an Adjoint Method

Optimal Tolerance Allocation in Blade Manufacturing by Sensitivity-Based Performance Impact Evaluation

Unsteady Transition Studies over a Pitching Airfoil Using a K-Ω-γ Transition Model

Behavior Sequence(s) of Ramjets and Uncontrollable Problems Due to Undesired Behavior Categories

Investigation of Hysteresis Loop in the Starting Process of Supersonic Cascade

Numerical and experimental investigation of aerodynamic noise from a cooling fan in a turbulent flow

Compressive Sensing and Reconstruction in Measurements with an Aerospace Application

Experimental study of the turbulence ingestion noise of rotor blades

Improved Prediction of Flow Around Airfoil Accreted with Horn or Ridge Ice

Rotor noise in non-axial inflow conditions

Numerical studies on small rotor configurations with validation using acoustic wind tunnel data

Turbulence ingestion noise generation in rotating blades

Bang-Bang Control Applied in Airfoil Roll Control with Plasma Actuators

Aeroacoustic and aerodynamic measurements at the rotor plane in the interaction of a small rotor with wings

Rotor aeroacoustic response to an axisymmetric turbulent boundary layer

Numerical Simulation of the Thermal Effect in the Cavitating Venturi Flow