Abstract:Heavy Vehicles speeds and dynamic loads are critical factors to bridge’s structure fatigue and rapid deterioration. The proposed paper addresses the modeling and simulation of dynamic loads of heavy vehicles, such as trucks and buses, on bridges and the effects of their speed on frequency response. In light of the above analysis, this paper proposes a method on how to minimize the structural vibrational of the combined vehicle and bridge system using semi-active suspension control. The vehicle dynamic load is minimized through an optimization scheme to yield an impact force with negligible bridge lateral deflection. The dynamic coupling between the vehicle and bridge are studied by examining the modes that are most likely to be excited by the vehicle speed and the roughness of the bridge surface. The models consist of a bridge and a heavy vehicle. The bridge is modeled as continuos, lightly damped beam with different supports defined by the boundary conditions. The vehicle is a multi-degree of freedom (MDOF) system undergoing motion in one plane. The methods of solution consist of a simple supported beam that closely simulates the first three beam modes of the Kishwaukee Bridge in Rockford, Illinois. The surface of the bridge generates some random excitation that serves as input to the vehicle, this is commonly known as the roughness of the bridge surface. The heavy vehicle is moving from left to right of the simply supported beam. The system is analyzed and optimized by semi-active control algorithms. Close form numerical solution is obtained by a set of second order differential equations for the bridge-vehicle system. Experimental data obtained from the vibration testing of Kishwaukee Bridge (Illinois) were collected and validated with a FEM model. Only the first three beam modes were used due to the experimental limitations and the actual structural condition of the bridge. Using MATLAB a simulation is obtained by inputting the linear time-variant equations and optimizing the system. Simulations of bridge vertical motion under different dynamic load conditions were examined and the results of bridge structure response were analyzed by comparing the effects of passive versus semi-active suspension controls. The method shows effectively how we can reduce the dynamic load force magnitude and its frequency of impact. The latter is usually associated with structural damage caused to the bridge.

Dynamic Analysis on Continuous Beam Carrying a Moving Mass with Variable Speed

A Numerically Stable Dynamic Coefficient Method and Its Application in Free Vibration of Partial-Interaction Continuous Composite Beams

Transient Dynamics of an Axially Moving Beam Subject to Continuously Distributed Moving Mass

Coupling dynamic behaviors of spatial flexible beam with weak damping

Dynamic analysis on an asymmetric spatial dumbbell-type model

Nonlinear Dynamic Analysis of Multi-vehicle Vehicle-bridge Coupling System

Modeling, dynamics, and parametric studies of a multi-cable-stayed beam model

Analytical study on dynamic responses of a curved beam subjected to three-directional moving loads

Dynamic Modeling and Analysis of Multi-Span Timoshenko Beams Under Moving Loads

Dynamic Analysis on Coupled Vehicle-bridge System by Modal Synthesis Method

Dynamic Analysis of a Cable-Stayed Bridge Subjected to a Continuous Sequence of Moving Forces

An interactive method for the analysis of the simulation of vehicle–bridge coupling vibration using ANSYS and SIMPACK

Effects of Heavy Vehicle Speeds on the Structure and Vibration of Bridges

A Frozen-Time Method for Discontinuous Internal Forces of a Multi-Span Beam Carrying Moving Subsystems

Dynamic Analysis of Partial-Interaction Composite Beams

Nonlinear Dynamic Analysis Of Flexible Beams Traversed By A Moving Mass

Moving mass/load speed influence on the structural dynamic response of a bridge

Dynamic Response of Large Span Self-anchored Suspension Bridge under Moving Vehicular Load

Dynamic analysis of a mass traveling on a simply supported nonhomogeneous beam composed of transversely embedded periodic arrays

Coupled dynamic analysis of low and medium speed maglev vehicle-bridge interaction using SIMPACK

Dynamic responses of a three-span continuous girder bridge with variable cross-section based on vehicle–bridge coupled vibration analysis