Abstract:We present the design, fabrication, and characterization of a seesaw-lever force-balancing suspension for a silicon gravity-gradient sensor, a gravity gradiometer, that is capable of operation over a range of gravity from 0 to 1 g. This allows for both air and space deployment after ground validation. An overall rationale for designing a microelectromechanical systems (MEMS) gravity gradiometer is developed, indicating that a gravity gradiometer based on a torsion-balance, rather than a differential-accelerometer, provides the best approach. The fundamental micromachined element, a seesaw-lever force-balancing suspension, is designed with a low fundamental frequency for in-plane rotation to response gravity gradient but with good rejection of all cross-axis modes. During operation under 1 g, a gravitational force is axially loaded on two straight-beams that perform as a stiff fulcrum for the mass-connection lever without affecting sensitive in-plane rotational sensing. The dynamics of this suspension are analysed by both closed-form and finite element analysis, with good agreement between the two. The suspension has been fabricated using through-wafer deep reactive-ion etching and the dynamics verified both in air and vacuum. The sensitivity of a gravity gradiometer built around this suspension will be dominated by thermal noise, contributing in this case a noise floor of around 10 E/Hz (1 E = 10−9/s2) in vacuum. Compared with previous conventional gravity gradiometers, this suspension allows a gradiometer of performance within an order of magnitude but greatly reduced volume and weight. Compared with previous MEMS gravity gradiometers, our design has the advantage of functionality under Earth gravity.

Fiber-Optic Sagnac Interferometry for Gravity Gradient Measurements

Reconstruction of the free-falling body trajectory in an optical interferometric absolute gravimeter (Retraction Notice)

Development of a Gravity Measurement System Based on Fiber-Optic Gyroscope

A Software-Compensation Method to Orthogonal Magnetic Field Drift in A Depolarized Fiber-Optic Gyroscope

Principle and Development Progress of Fiber-Optic Gravity Gradiometer for Deep Earth Exploration

Optical Acceleration Measurement Method with Large Non-ambiguity Range and High Resolution Via Synthetic Wavelength and Single Wavelength Superheterodyne Interferometry

Fiber-optic magnetic gradiometer utilizing the magnetic translational force

A seesaw-lever force-balancing suspension design for space and terrestrial gravity-gradient sensing

A torsion balance device for measuring the gravity gradient

A Compact Atom Interferometer for Field Gravity Measurements

Magnetic drift in single depolarizer interferometric fiber-optic gyroscopes induced by orthogonal magnetic field

Gravimetry through non-linear optomechanics

Single-Fiber Sagnac-Like Interferometer for Optical Rotation Measurement in Atomic Spin Precession Detection

Laboratory demonstration of an off-axis optical bench design for future gravity missions

Systematic Research on Measuring Acceleration of Gravity by Laser Interferometry

Temperature and Lateral Pressure Sensing Using a Sagnac Sensor Based on Cascaded Tilted Grating and Polarization-Maintaining Fibers

High-order gravitational gradient effect in the gravity gradient measurement by the Eötvös-type torsion balance

Enhancing Non-Newtonian Gravity Constraint Using a Levitated Pendulum in Vacuum

First result for testing semiclassical gravity effect with a torsion balance