Abstract:The ultrasonic-frequency pulse underwater wet welding (UFP-UWW) process was achieved through a constant-voltage-mode power source connecting an ultrasonic-frequency pulse power source in parallel. The arc voltage and welding current waveforms, sound signal variations, microstructural characteristics and mechanical properties at different parameters were investigated. The results showed that the ultrasonic-frequency pulse voltage and current of the UFP-UWW process displayed a periodic high-frequency oscillation on the based values of the conventional UWW process. The arc stability of the UFP-UWW process improved owing to the fact that the proportions of the unstable arc burning region could be reduced to 1.56% after the introduction of the ultrasonic-frequency pulse current. No significant changes in weld width and penetration were observed while the weld dilution rate increased to 54.2% for the combination of 40 V–30 kHz, compared with the results of the conventional UWW process. The flux-cored arc (FCA) welding arc in the air had the same frequency response to the ultrasonic excitation signal, which verified the existence of the ultrasonic-frequency vibration induced by the periodic high-frequency electromagnetic forces. The application of the ultrasonic-frequency pulse produced finer columnar grains in the welds with an average length of 315 μm, although the amount of pro-eutectoid ferrite and acicular ferrite varied little. The mechanical properties of the welded joints were also noticeably enhanced with the application of different ultrasonic excitation frequencies. The optimum tensile strength and impact toughness of the welded joint were improved by 6.7% and 21.7% when the applied ultrasonic excitation voltage was 40 V for a pulsed frequency of 30 kHz. These results facilitate the application of ultrasonic arc welding technology in the marine field.

Evaluation of Arc Signals, Microstructure and Mechanical Properties in Ultrasonic-Frequency Pulse Underwater Wet Welding Process with Q345 Steel

Microstructure and Mechanical Properties of Ultrasonic Assisted Underwater Wet Welding Joints

Investigating the Advantages of Ultrasonic-assisted Welding Technique Applied in Underwater Wet Welding by In-Situ X-ray Imaging Method

Microstructure Evolution Of E40 Steel Weldments In Ultrasonic-Wave-Assisted Underwater Fcaw

Effect of ultrasonic vibration on microstructural evolution and mechanical properties of underwater wet welding joint

Effect of Arc Behaviour and Metal Transfer Process on Aluminium Welds During Ultrasonic Frequency Pulsed GMAW

Effects of Arc-Excited Ultrasonic on Microstructures and Properties of Weld

Comprehensive Effect of Arc and Ultrasonic Energy on MIG Arc Ultrasonic Welding

The ultrasonic characteristics of high frequency modulated arc and its application in material processing.

Research Status and Future Perspectives on Ultrasonic Arc Welding Technique

Study on arc-ultrasonic welding technology

Effect of Pulsed Ultrasonic on Arc Acoustic Binding in Pulsed Ultrasonic Wave-Assisted Pulsed Gas Tungsten Arc Welding

Bubble Evolution in Ultrasonic Wave-Assisted Underwater Wet FCAW

Effect of Arc-Ultrasonic Parameters on Welding Joint Performance

Effect of Arc Ultrasonic Vibration on Microstructure of Joint of Plasma Arc 'in Situ' Welding of Sicp/6061al

Effect of Ultrasonic Power on Microstructural and Mechanical Properties of Al/Cu Plasma Arc Welding–Brazing Joints

Microstructure and Mechanical Properties of SUS304 Weldments Manufactured by Ultrasonic Vibration Assisted Local Dry Underwater Welding

Influences of Ultrasonic Pulse Square-Wave Current Parameters on Microstructures and Mechanical Properties of 2219 Aluminum Alloy Weld Joints

Effect of ultrasound on plasma arc and experimental research on welding

Weld Formation, Microstructure and Mechanical Properties of Q235 Weldments Fabricated by Double-pulsed Submerged Arc Welding

Study on Arc-ultrasonic SAW Improving Structure and Property of 09mnnidr Welding Joint