Abstract:The discontinuities of a five-axis linear-segment toolpath result in fluctuation in the feedrate, acceleration and jerk commands that lead to machine tool vibration and poor surface finish. For path smoothing, with the global curve-fitting method it is difficult to control fitting error and the local corner-smoothing method has large curvature extreme. For path synchronization, the parameter synchronization method cannot ensure smooth rotary motion. Aiming at these problems, this paper proposes a double B-spline curve-fitting and synchronization-integrated feedrate scheduling method. Two C2-continuous and error-bounded B-spline curves are produced to fit tool-tip position and tool orientation, respectively. The fitting error is controlled by locally refining the curve segments that exceed the fitting tolerance. The tool-tip position trajectory is firstly planned to address axial kinematic constraints in the feedrate scheduling process. Then the feedrate is deformed for the tool orientation to guarantee smooth rotary motion as well as to share the same motion time with the tool-tip position segment by segment. The feasibility and effectiveness of the proposed method have been validated by simulations and experiments on the S-shape test piece. Simulations show that the proposed curve-fitting method can generate smooth toolpath and constrain fitting error. The proposed feedrate scheduling method can guarantee smooth rotary motion and keep axial motions under kinematic limits, compared with the method that does not consider axial kinematic constraints and the parameter synchronization method. Experimental results verify that the proposed curve-fitting method can generate smooth tool path under fitting tolerance, and the proposed feedrate scheduling method can produce smooth and restricted axial motions.

Avoiding feed fluctuation for five-axis interpolation using 3D clothoid and B-spline

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Smoothing interpolation of five-axis tool path with less feedrate fluctuation and higher computation efficiency

Double B-Spline Curve-Fitting and Synchronization-Integrated Feedrate Scheduling Method for Five-Axis Linear-Segment Toolpath

A smoothing method of continuous line-segment path in CNC machining based on real-time transformation of interpolation points

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

A Feedrate Planning Method for the NURBS Curve in CNC Machining Based on the Critical Constraint Curve

Non-isometric dual-spline interpolation for five-axis machine tools by FIR filtering-based feedrate scheduling using pseudo curvature under axial drive constraint

A G4 continuous B-spline transition algorithm for CNC machining with jerk-smooth feedrate scheduling along linear segments

A Real-Time C3 Continuous Tool Path Smoothing and Interpolation Algorithm for Five-Axis Machine Tools

Optimal curvature-smooth transition and efficient feedrate optimization method with axis kinematic limitations for linear toolpath

Smooth toolpath interpolation for a 5-axis hybrid machine tool

Enhancing Five-Axis CNC Toolpath Smoothing: Overlap Elimination with Asymmetrical B-splines

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

An accurate surface error optimization for five-axis machining of freeform surfaces

Global smoothing for five-axis linear paths based on an adaptive NURBS interpolation algorithm

Five-axis path smoothing based on sliding convolution windows for CNC machining

Smooth Geodesic Interpolation for Five-Axis Machine Tools

NURBS Interpolator with Minimum Feedrate Fluctuation Based on Two-Level Parameter Compensation

A novel time-optimal linear toolpath smoothing method based on airthoid and circular splines for CNC machining

Description and Smoothing of NC Motion Path Based on the Cubic Trigonometric Interpolation Spline