Abstract:Natural gas is sampled and produced throughout the lifespan of a petroleum field. Gas composition and isotope data are critical inputs in the exploration and field development, such as gas show identification, petroleum system analysis, fluid characterization, and production monitoring. On-site gas analysis is usually conducted within a mud gas unit, which is operationally unavailable after drilling. Gas samples need to be taken from the field and shipped back to the laboratory for gas chromatography and isotope-ratio mass spectrometry analyses. Results are usually without sufficient resolution to fully characterize the heterogeneity and dynamics of fluids within the reservoir and the production system. In addition, it often takes a considerable time to obtain the results using the traditional method. A novel QEPAS (quartz-enhanced photoacoustic spectroscopy) sensor system was developed to move gas composition analyses to field for quasi-real-time characterization and monitoring. With respect to previously reported QEPAS prototypes for trace gas detection, the new system realized measuring concentrations of methane (C1), ethane (C2), and propane (C3) in gas phase within the percentage range that is typically encountered in natural gas samples from oil and gas fields. A gas mixing enclosure was used to dilute the natural gas-like mixtures in nitrogen gas (N2) to avoid the saturation of QEPAS signals. An iterative analysis based on multilinear regression of QEPAS spectra was developed to filter out the influence of gas matrix variation from multiple hydrocarbon components. The advance in simultaneous measuring hydrocarbon gases and expanded linearity range of QEPAS, with previously reported detection of H2S, CO2, and gas isotopes (12CO2/13CO2, 13CH4/12CH4), opens a way to use the advanced sensing technology for in situ and real-time gas detection and chemical analysis in the oil industry.

Simultaneous Monitoring of Atmospheric CH4, N2O, and H2O Using a Single Gas Sensor Based on Mid-IR Quartz-Enhanced Photoacoustic Spectroscopy

Multi-gas quartz-enhanced photoacoustic sensor for environmental monitoring exploiting a Vernier effect-based quantum cascade laser

Environmental Monitoring of Methane with Quartz-Enhanced Photoacoustic Spectroscopy Exploiting an Electronic Hygrometer to Compensate the H2O Influence on the Sensor Signal

Simultaneous Detection of CO2 and N2O Based on Quartz-Enhanced Photothermal Spectroscopy by Using NIR and MIR Lasers

Sensitive methane detection based on quartz-enhanced photoacoustic spectroscopy with a high-power diode laser and wavelet filtering

Quartz-Enhanced Photoacoustic Sensor Based on a Multi-Laser Source for In-Sequence Detection of NO2, SO2, and NH3

Simultaneous atmospheric CH 4 , CO 2 and O 2 detection using fiber-optic switch (FOS)-based time-division multiplexed NIR laser long optical path absorption spectroscopy

Impact of Residual Water Vapor on the Simultaneous Measurements of Trace CH4 and N2O in Air with Cavity Ring-Down Spectroscopy

Simultaneous detection of multiple gases using multi-resonance photoacoustic spectroscopy

High-sensitivity methane detection based on QEPAS and H-QEPAS technologies combined with a self-designed 8.7 kHz quartz tuning fork

Simultaneous Dual-Gas Measurement Using Hybrid Photoacoustic Spectroscopy

A Dual-Gas Sensor Using Photoacoustic Spectroscopy Based on a Single Acoustic Resonator

Mid-infrared Quasi-Distributed Carbon Monoxide Gas Sensing Based on QEPAS and Hollow Waveguide

Simultaneous measurement of methane, propane and isobutane using a compact mid-infrared photoacoustic spectrophone

Frequency division multiplexing and wavelength stabilized 2f/1f wavelength modulation spectroscopy for simultaneous trace CH4 and CO2 detection

Off-axis QEPAS using a pulsed nanosecond Mid-Infrared Optical Parametric Oscillator

Humidity enhanced N2O photoacoustic sensor with a 4.53 μm quantum cascade laser and Kalman filter

Simultaneous Detection of Methane, Ethane, and Propane by QEPAS Sensors for On-Site Hydrocarbon Characterization and Production Monitoring

Quartz-enhanced photoacoustic spectroscopy as a platform for non-invasive trace gas analyser targeting breath analysis

Nitrous oxide quartz-enhanced photoacoustic detection employing a broadband distributed-feedback quantum cascade laser array

High-concentration methane and ethane QEPAS detection employing partial least squares regression to filter out energy relaxation dependence on gas matrix composition