Abstract:Hyper‐redundant manipulators have strong flexibility that benefits from their redundant limb structure. However, a large number of redundant degrees of freedom will also lead the solution of inverse kinematics much more difficult, which restricts their motion performance to some extent. Inspired by the FABRIK (Forward and Backward Reaching Inverse Kinematics) method, an improved inverse kinematics solution method for the hyper‐redundant manipulator is proposed. Based on the space vector method, the kinematic model of the manipulator is established to dynamically acquire its endpoint position, and the workspace is further obtained by using the Monte Carlo method. The original search method is optimized, the include angle decoupling mechanism between adjacent links is established to obtain the rotation angles of each joint, and the joint angle limitation is introduced to meet the actual manipulator structural restriction. On this basis, the pose constraint mechanism is established to realize the control of the end‐link pose, and the linear degree of freedom is introduced to realize the solution after the directional expansion of the manipulator's workspace. A series of simulation experiments are carried out. In the experiments, the position error of the manipulator's endpoint is always less than 10−6 mm. Meanwhile, the comparative experimental results show that compared with the original method, the proposed method exhibits higher position accuracy under the condition that the computation time is almost the same. In addition, in the end‐link pose constraint experiment and path motion experiments, the pose error of the end‐link is always less than 10−7°, indicating that the end‐link pose can also meet the high accuracy requirements under the premise of ensuring high position accuracy. Finally, the prototype experiment further verifies its performance.

A Solution Method for Optimal Stiffness Path in Joint Space of Serial Manipulator

A Joint Physical Constraints Avoidance Method for Inverse Kinematics Problem of Redundant Humanoid Manipulator

Inverse Kinematics Solving of a Novel Soft Manipulator with Vision and IMU Data

Stiffness Modeling and Optimization Analysis of a Novel 6-DOF Collaborative Parallel Manipulator.

Stiffness Optimization Design Of A Light Space Manipulator

Research on Real-Time Joint Stiffness Configuration of a Series Parallel Hybrid 7-DOF Humanoid Manipulator in Continuous Motion

A Control Method of Space Manipulator for Peg-in-Hole Assembly Task Considering Equivalent Stiffness Optimization

Optimal Kinematic Design of a Planar Parallel Manipulator with High Speed and High Precision

Optimization Algorithm Of Serial Manipulator Structure Based On Posture Manipulability

Stiffness Modeling Approach for a 3-DOF Parallel Manipulator with Consideration of Nonlinear Joint Stiffness

Joint Limit Optimal Inverse Kinematics of the 7-Dof Manipulator with Link Offset Based on Semi-analytical Solution

Stiffness Optimization of Space Manipulator Based on Mass Allocation

Research on Joint Torque Optimization Method of Redundant Space Manipulators with Vibration Suppression

An integrated configuration optimization approach for 6-dof serial manipulators on performance indices

A Novel Solution Of Inverse Kinematic For 6r Robot Manipulator With Offset Joint Based On Screw Theory

A Joint Torque Optimization Method for Space Manipulators Considering the In-Orbit Motion Reliability

Vrm: A Unified Framework For Closed-Form Solutions Of A Special Class Of Serial Manipulators

An Analytic and Optimal Inverse Kinematic Solution for a 7-DOF Space Manipulator

Research on Path Optimization Algorithm of the 6-DOF Manipulator

An improved inverse kinematics solution method for the hyper‐redundant manipulator with end‐link pose constraint

Optimal Design of a Novel High Speed and High Precision 3-DOF Manipulator