Abstract:Abstract The presence of impurities in captured CO2 plays a vital role in the safe and effective CO2 transport and storage in the CCUS chain. Impurities can significantly increase the cost of processing, transport, and storage and moreover add additional challenges to the design, operation, health and safety and integrity aspects. The effects of various impurities on the aforementioned challenges have been addressed in this work. Despite the importance of this area, there are still some knowledge gaps in terms of assessing the impact of CO2 specification on CCUS design and operations. International standards address different elements of the CCS chain, but none cover the full chain or consider the full chain economics. There are also differences between industry and leading CO2 authorities regarding the potential issues and challenges of implementing those standards. This paper reviews available standards and references which provide specifications/limitations for impurities for the purpose of transport and storage. In this work, the modified cubic EoSs and GERG EoS have been used to predict the thermodynamic properties and tuned viscosity models have been used for the prediction of transport properties. The required specifications for the quality of CO2 streams have been investigated using the above methodology for fluid properties, followed by the use of commercial software packages for thermohydraulic analysis of CO2 pipelines. Additionally, the storage capacity and geochemistry of fluids under high-pressure and high-temperature (HPHT) storage conditions were investigated. The impact of impurities has been assessed based on various CO2 sources using commercial capturing technologies. The assessment considered the impact of impurities on thermodynamic, thermohydraulic, integrity and operation of CO2 transport, injection, and storage system. This would include the effects of various types of components and their typical concentrations, e.g., water content, non-condensable gases (N2, O2, CH4, Ar, H2and CO), toxic gases (H2S and SO2), and hydrocarbons, on the thermophysical properties including density, viscosity, phase envelope and hydraulic parameters. A comparison of modelling results against the available experimental data measured at elevated pressure and temperature conditions have also been presented. This paper has mainly focused on the lessons learned from past CO2 transport design and operational experiences in order to identify the areas where it could lead to an optimised system in terms of design, costs, and operation. Additionally, past experience in the design of CO2 pipelines and operation of CO2 injection has been used to identify opportunities where CO2 specifications and guidelines could potentially be modified in order to achieve an optimised and cost-effective CO2 transport and injection system. Keywords: CO2 Specification; CO2 Transport Pipelines; Design and Operation Challenges; CO2 impurities; CCUS;

A CFD Study of the Effects of Combined Impurities, Ground Temperature, and Topography Upon the Consequence Distances and Plume Shapes Generated by CO2 Release from CCS Pipeline Failure

Dispersion of carbon dioxide released from buried high-pressure pipeline over complex terrain

Simulation study on near-field structure and flow characteristics of high-pressure CO<sub>2</sub> released from the pipeline

Study on Dispersion of Carbon Dioxide over the Shrubbery Region

Computational fluid dynamics study of CO2 dispersion with phase change of water following the release of supercritical CO2 pipeline

Analysis of Internal Corrosion of Supercritical CO2 Pipeline

Topography modelling for potentially leaked CO2 diffusion and its application in human health risk assessment for carbon capture, utilisation, and storage engineering in China

Influence of Mine Environmental Factors on the Liquid CO2 Pipeline Transport System with Great Altitude Difference

Investigation on crack propagation and reasonable wall thickness of supercritical CO 2 pipeline

Impact of CO2 Specifications on Design and Operation Challenges of CO2 Transport and Storage Systems in CCUS

Investigation of Pipeline CO2 Leakage and Diffusion on Offshore Platforms Based on Numerical Simulation

Preliminary Environmental Risk Assessment Study Using US DOE’s National Risk Assessment Partnership on Leakage through Legacy Wells at the Shenhua CCS Demonstration Project

CFD Simulation Models and Diffusion Models for Predicting Carbon Dioxide Plumes Following Tank and Pipeline Ruptures—Laboratory Test and a Real-World Case Study

Experiment on the medium volume fraction distribution and hazardous area in the case of CO2pipeline leakage

Role of capillary pressure on carbon dioxide sequestration: mathematical analysis

Investigation of Dynamic Phase Changes in High-Pressure Pipelines During Flexible CO2 Transport

Modeling of possible CO2 leakage with phase transition in wellbore-reservoir system based on the Ordos CCS project, China

Failure mechanism of carbon dioxide transport infrastructure: A comprehensive review

Exploring the influences of salinity on CO 2 plume migration and storage capacity in sloping formations: A numerical investigation

An approach of quantitative risk assessment for release of supercritical CO2 pipelines

Phase transition and fluid backflow during the non-injection period in the Ordos CCS project, China