Abstract:The finite control set model predictive current control(FCS-MPCC)can significantly improve the dynamic performance of the five-phase permanent magnet synchronous motor (5P-PMSM), but its control performance highly depends on the accuracy of the model parameters. The parameter error compensation based on the first-order sliding mode observer can improve the robustness of FCS-MPCC under Model parameter mismatch. The introduction of the sign function leads to chattering in the observation results. In order to eliminate this chattering, a first-order low-pass filter needs to be added for compensation. However, the introduction of filters will increase system design difficulty and bring system delays, which will affect the compensation effect. Therefore, a second-order sliding mode observer, based on the variable-gain Super-Twisting algorithm, is proposed to realize the parameter error estimation and one-beat delay compensation in this paper. By establishing the Lyapunov function, the stability proof of the proposed observer, and the calculation method of the observer parameters are given. Besides, the third harmonic current can be suppressed, and the computational burden of the control unit can be reduced by controlling the proportion of medium vector and large vector reasonably. According to the deadbeat control, the optimal virtual voltage vector action time in each cycle is obtained, which improves the tracking ability of the reference current. At last, Extensive experimental results validate that i) the proposed observer can significantly improve the robustness of model predictive current control even under parameters mismatch; ii) the proposed control method can effectively enhance the dynamic performance of the 5-phase PMSM.

Disturbance Preview Based Multistep Finite Control Set Model Predictive Current Control for PMSM

Virtual-Vector-Based Model Predictive Current Control of Five-Phase PMSM with Stator Current and Concentrated Disturbance Observer.

An Improved Deadbeat Predictive Current Control for Five-Phase PMSM

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Disturbance Compensation-Based Model Predictive Flux Control of SPMSM with Optimal Duty Cycle

Predictive Current Control for Permanent Magnet Synchronous Motor Based on Disturbance Observer

A Robust Deadbeat Predictive Current Control Method for IPMSM

Prediction Error Analysis of Finite-Control-Set Model Predictive Current Control for IPMSMs

Improved Multi-step FCS-MPCC with Disturbance Compensation for PMSM Drives -- Methods and Experimental Validation

Improved Finite Control Set Model Predictive Current Control for Permanent Magnet Synchronous Motor with Sliding Mode Observer

Model Predictive Current Control for SPMSM Using Discrete Sliding-Mode Control Based on Disturbance Compensation

Single-Loop Robust Predictive Speed Control of PMSM System with Overcurrent Protection: A Disturbance Preview Approach

Improved Deadbeat Predictive Current Control With Embedded Resonant Polynomial and Disturbance Observer for PMSM Current Distortion Rejection

Predictive Functional Control of PMSM Based on a Composite Prediction Model

An Improved Predictive Functional Control Method with Application to PMSM Systems

Finite Control Set Model Predictive Current Control For Pmsm Based On Extended State Observer

Multi-Disturbances Suppression for Permanent Magnet Synchronous Motor Based on Active Disturbance Rejection Model Predictive Control

Multiple-Models Adaptive Disturbance Observer-Based Predictive Control for Linear Permanent Magnet Synchronous Motor Vector Drive

Two-step Model-free Predictive Current Control for PMSM

A New Model-Free Deadbeat Predictive Current Control for PMSM Using Parameter-Free Luenberger Disturbance Observer

A Robust Predictive Current Control for PMSM Based on Extended State Observer