Abstract:This study presents a comprehensive comparative analysis of View-Factor (VF) and Ray Tracing (RT) models to evaluate their effectiveness in predicting bifacial irradiance in bifacial photovoltaic (PV) systems. The comparison was conducted using an experimental dataset from NREL (CO, USA), which included front and rear plane-of-array (POA) irradiance values measured by silicon solar cell pyranometers. This initial step established a baseline understanding of each model's predictive capabilities in a real-world context. The comparison with POA measurements indicates that for front illumination, both models are closely aligned with relative Root Mean Square Error (rRMSE) of 7.2% (VF) and 7.6% (RT). For rear illumination, the rRMSE increases to 20.9% and 22.9% for the VF and RT models, respectively. Additionally, both models show a similar relative Mean Bias Error (rMBE) for front illumination of −1.8% and − 2.0% for the VF and RT methodologies, respectively. However, for rear illumination, the RT model predicts with only −0.1% bias, while the VF model underestimates POA irradiance by 8.4%. The study then focuses on directly comparing the VF and RT models in their simulation of cell-level irradiance. Starting from a VF-compatible problem, the research systematically introduces additional features and components in RT simulations to assess the impact of increased complexity on irradiance predictions. In contrast to underestimating of the rear POA sensor values, the VF model overestimates rear module irradiance by 6.7% due to rear module shading by the frame and structure, which do not equally affect the POA sensors. These findings emphasize the importance of detailed geometric modelling in achieving accurate predictions. The overestimation of the module rear illumination translates to a 0.8% overestimation of energy yield by the VF model, considering cell-level irradiance values. Conclusively, the study highlights the significance of accurately incorporating structural elements when modelling bifacial PV systems.

Prediction of I-V Characteristics for Bifacial PV Modules Via an Alpha-Beta Single Double-Diode Model

A coupled optical-electrical-thermal model of the bifacial photovoltaic module

Experimental investigation on the performance evaluations of the bifacial photovoltaic modules

Influence of incidence angle effects on the performance of bifacial photovoltaic modules considering rear-side reflection

Experimental investigation of the bifacial photovoltaic module under real conditions

Development and validation of a concise and anisotropic irradiance model for bifacial photovoltaic modules

Numerical modeling of all-day albedo variation for bifacial PV systems on rooftops and annual yield prediction in Beijing

Modelling bifacial irradiance – Step-by-step comparison and validation of view factor and ray tracing models

A Digital Twin Approach for Modeling Electrical Characteristics of Bifacial Solar Panels

A general illumination method to predict bifacial photovoltaic system performance

A Robust Parametrization Method of Photovoltaic Modules for Enhancing One-Diode Model Accuracy under Varying Operating Conditions

An Novel Explicit Model for Photovoltaic I-V Characteristic Prediction Based on Different Splitting Spectrum

A comprehensive performance evaluation of bifacial photovoltaic modules: insights from a year-long experimental study conducted in the Canadian climate

Energy yield prediction of bifacial perovskite/silicon tandem photovoltaic modules

View Factors Approach for Bifacial Photovoltaic Array Modeling: Bifacial Gain Sensitivity Analysis

Optimization and Performance of Bifacial Solar Modules: A Global Perspective

Comparison of different simplistic prediction models for forecasting PV power output: Assessment with experimental measurements

Developing an energy rating for bifacial photovoltaic modules

Performance Assessment of Mismatch Mitigation Methodologies Using Field Data in Solar Photovoltaic Systems

Simple Computational Method of Predicting Electrical Characteristics in Solar Cells

Weather Responsive Multidimensional Photovoltaic Efficiency Model for Simulation of Custom-Built Bifacial Panel