A CMOS Dual-Polarized Phased-Array Beamformer Utilizing Cross-Polarization Leakage Cancellation for 5G MIMO Systems
Jian Pang,Zheng Li,Xueting Luo,Joshua Alvin,Rattanan Saengchan,Ashbir Aviat Fadila,Kiyoshi Yanagisawa,Yi Zhang,Zixin Chen,Zhongliang Huang,Xiaofan Gu,Rui Wu,Yun Wang,Dongwon You,Bangan Liu,Zheng Sun,Yuncheng Zhang,Hongye Huang,Naoki Oshima,Keiichi Motoi,Shinichi Hori,Kazuaki Kunihiro,Tomoya Kaneko,Atsushi Shirane,Kenichi Okada
DOI: https://doi.org/10.1109/jssc.2020.3045258
2021-04-01
Abstract:This article introduces a power-efficient and low-cost CMOS 28-GHz phased-array beamformer supporting fifth-generation (5G) dual-polarized multiple-in-multiple-out (MIMO) (DP-MIMO) operation. To improve the cross-polarization (cross-pol.) isolation degraded by the antennas and propagation, a power-efficient analog-assisted cross-pol. leakage cancellation technique is implemented. After the high-accuracy cancellation, more than 41.3-dB cross-pol. isolation is maintained along with the transmitter array to the receiver array. The element-beamformer in this work adopts the compact neutralized bi-directional architecture featuring a minimized manufacturing cost. The proposed beamformer achieves 22% per path TX-mode efficiency and a 4.9-dB RX-mode noise figure. The required on-chip area for the beamformer is only 0.48 mm<sup>2</sup>. In over-the-air measurement, a 64-element dual-polarized phased-array module achieves 52.2-dBm saturated effective isotropic radiated power (EIRP). The 5G standard-compliant OFDMA-mode modulated signals of up to 256-QAM could be supported by the 64-element modules. With the help of the cross-pol. leakage cancellation technique, the proposed array module realizes improved DP-MIMO EVMs even under severe polarization coupling and rotation conditions. The measured DP-MIMO EVMs are 3.4% in both 64-QAM and 256-QAM. The consumed power per beamformer path is 186 mW in the TX mode and 88 mW in the RX mode.
engineering, electrical & electronic