A Novel Near-Field UHF RFID Reader Array Antenna for Configurable Electrically Large Reading Area
Xiuping Li,Quanping Li,Hua Zhu,Qingwen Li,Zihang Qi,Jun Xiao
DOI: https://doi.org/10.1109/tap.2019.2924902
IF: 5.7
2019-01-01
IEEE Transactions on Antennas and Propagation
Abstract:In this paper, a novel configurable loop array antenna based on resonator-loaded microstrip lines (RLML) is proposed to enlarge the interrogation zone of the reader antenna for near-field ultrahigh-frequency (UHF) radio frequency identification (RFID) system. The proposed loop array antenna is composed of a number of RLML loop units. By configuration of the RLML loop units sharing a common side with its adjacent RLML loop units which carry reverse-direction flowing current in the ${x}$ -axis and ${y}$ -axis directions, loop array antennas are created to generate a strong and uniform magnetic-field distribution over a large configurable interrogation area. As an example, loop array antennas with $1\,\times \,8$ and $2\,\times \,3$ RLML loop units implemented onto a piece of an FR4 printed circuit board (PCB) are designed, fabricated, and measured. The measured bandwidth ranges from 894 to 964 MHz for a $1\times 8$ array antenna with a reading area of $570 \,\,{\mathrm{ mm}}\times 150\,\,{\mathrm{ mm}}$ and 917-932 MHz for a $2\times 3$ array antenna with a reading area of $270 \,\,{\mathrm{ mm}}\times 240\,\,{\mathrm{ mm}}$ . The reading distances of an $1\times 8$ array antenna for loop-like tag, dipole-like tag, and antimetal tag are achieved up to 22, 42, and 45 mm, respectively. For a $2\times 3$ array antenna, the reading distances of three tags are achieved up to 23, 43, and 40 mm.