Abstract:Purpose : Establish a technique for simultaneous interrupted volumetric imaging of internal structure and time-resolved full-field surface strain measurements during in-situ X-ray micro-computed tomography (XCT) experiments. This enables in-situ testing of stiff materials with large forces relative to the compliance of the in-situ load frame, which might exhibit localization (e.g., necking, compaction banding) and other inhomogeneous behaviors. Methods : The system utilizes a combination of in-situ XCT, 2D X-ray imaging, and particle tracking to conduct volumetric imaging of the internal structure of a specimen with interrupted loading and surface strain mapping during loading. Critically, prior to the laboratory-scale XCT experiments, specimens are speckled with a high-X-ray-contrast powder that is bonded the surface. During in-situ loading, the XCT system is programmed to capture sequential 2D X-ray images orthogonal to the speckled specimen surface. A single particle tracking (SPT) or digital image correlation (DIC) algorithm is used to measure full-field surface strain evolution throughout the time-sequence of images. At specified crosshead displacements, the motion and 2D image sequence is paused for volumetric XCT image collection. Results : We show example results on a micro-tensile demonstration specimen additive manufactured from Inconel 718 nickel-chrome alloy. Results include XCT volume reconstructions, crosshead-based engineering stress, and full-field strain maps. Conclusion : We demonstrate an in-situ technique to obtain surface strain evolution during laboratory-scale XCT testing and interrupted volumetric imaging. This allows closer investigation of, for example, the effect of micro-pores on the strain localization behavior of additive manufactured metal alloys. In addition to describing the method using a representative test piece, the dataset and code are published as open-source resources for the community.

A 4D Soil-Structure Interaction Model Testing Apparatus

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

Remote Collaborative Pseudo-dynamic Tests of a Ten-story Concrete Filled Steel Tubular Composite Frame

Development of Structural Testing Equipment for Impact and Complex Loading

An Automated Large-Scale Apparatus for 3-D Cyclic Testing of Soil-Structure Interfaces

Physical Model Test and Application of 3D Printing Rock-Like Specimens to Laminated Rock Tunnels

Remotely Collaborative Pseudo-Dynamic Testing Method for MDOF Frame Structure

A Platform for Remote Analysis and Pseudo Dynamic Testing of SDOF Structures

Study on remote collaborative pseudo-dynamic tests of multi-story frames

Experimental Methods for Seismic Simulation of Structural Columns: State-of-the-Art Review and Introduction of New Multiuse Structural Testing System

Experimental Technology for the Shear Strength of the Series-Scale Rock Joint Model

Three-dimensional large-scale test of soil-structure interface

Large-Scale Apparatus for Monotonic and Cyclic Soil-Structure Interface Test

A Technique for In-Situ Displacement and Strain Measurement with Laboratory-Scale X-Ray Computed Tomography

Development and Application of 3D Soil-Structure Interface Test Apparatus

An Automatic Three-Dimensional Loading Apparatus for Static Tests of Truss Joints

Multifunctional In-Situ Testing Device for Investigating the Service Performance of Materials

Model Design and Application for Excavation Face Stability in Upward Shield Tunneling

Large scale analogue experiments in rock mechanics : new experimental facility, 3D-printed material and insertion of force transducers for stresses measurement.

Development of a Large-scale Computer-controlledCompression-torsional Multi-axial Loading Apparatus

Large-scale combined torsional and axial loading system (TorAx) – A new perspective on multiaxial testing of fracture and stress transfer in plain and reinforced concrete