Abstract:3D mapping is now essential for urban infrastructure resource monitoring, autonomous driving, and the fulfillment of digital earth. LiDAR-based Simultaneous Localization And Mapping (SLAM) technology has been widely studied because of its efficient application in the reconstruction of the 3D environments that benefitted from its sensor characteristic. However, the sparsity of low cost LiDAR (Light Detection And Ranging) sensor provides great challenge for it. Insufficient or poor distribution of the constraints as well as the motion distortion in one scan of point cloud would deteriorate the pose estimation in SLAM. In this paper, a novel 3D mapping method based only on the LiDAR data is proposed to enhance the performance of SLAM-based 3D point clouds map reconstruction. The proposed system consists of two main modules: localization module for rapid egomotion estimation within the surrounding environment, and mapping module for accurate point clouds fusion. As for the localization, scan-to-map point cloud registration scheme are adopted where structural features are firstly extracted to provide valid correspondences. What's more, an effective method is figured out to balance the cost factors for the optimization function of pose estimation in the process. This further handles the degenerated cases for cloud registration. Focusing on improving the quality of the map, a spline motion model is integrated with non-rigid point cloud fusion to facilitate the continuous and nonrepetitive mapping of the environment. Extensive experiments are carried out for the verification of our system including large-scale outdoor and long-corridor scenes. According to the experimental results, our system has achieved 0.78 parts per thousand closure error and 27.5% improvement in the APE (Absolute Pose Errors), outperforming the state-of-the-art LiDAR-based SLAM (e.g. LeGO-LOAM) frameworks in our test sites. To specifically verify the performance of 3D mapping, the precision of 3D points is quantified through comparing with the high-precision point cloud maps collected by MLS (Mobile Laser Scanning) and TLS (Terrestrial Laser Scanning). The RMS of point-to-plane distances have improved 20% based on the fitted Weibull distribution. In addition, some ablation tests are conducted to reveal the efficacy of different components in our system.

3D City Map Reconstruction from LEO Communication Satellite SNR Measurements

3-D Map Reconstruction in Cross-country Environment

Efficient 3D reconstruction for urban scenes

Satellite visibility analysis considering signal attenuation by trees using airborne laser scanning point cloud

High-Efficiency Urban 3D Radio Map Estimation Based on Sparse Measurements

3D Virtual Urban Scene Reconstruction from a Single Optical Remote Sensing Image.

UAV-Aided 3D Building Map Reconstruction from RSS Measurements: A Diffraction-Based Approach

3D map creation using crowdsourced GNSS data

An Automated 3D Approach for Buildings Reconstruction from Airborne Laser Scanning Data

3D-CSTM: A 3D continuous spatio-temporal mapping method

A review of 3D reconstruction from high-resolution urban satellite images

Reconstructing Urban 3D Model Using Vehicle-Borne Laser Range Scanners

Accurate Reconstruction of the LoD3 Building Model by Integrating Multi-Source Point Clouds and Oblique Remote Sensing Imagery

3D Building Modelling with Digital Map, Lidar Data and Video Image Sequences

3D Building Roof Reconstruction from Airborne LiDAR Point Clouds: a Framework Based on a Spatial Database

Reconstruction of High-Precision Semantic Map

A 3D Reconstruction Framework of Buildings Using Single Off-Nadir Satellite Image

Reconstruction of 3D Maps for 2D Satellite Images.

A Real-Time 3D Perception and Reconstruction System Based on a 2D Laser Scanner.

An Efficient Dense Reconstruction Algorithm from LiDAR and Monocular Camera

3D Indoor Reconstruction Based on Laser Scanner and Monocular Camera