Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Hydrothermally synthesized nanostructured NiTiO3 thick films for H2S and room temperature CO2 gas sensing

Influence of heat treatment on H2S gas sensing features of NiO thin films deposited via thermal evaporation technique

Gas Sensing Characteristics of Nano-Structured Metal Oxides

Investigations on TiO2–NiO@In2O3 nanocomposite thin films (NCTFs) for gas sensing: synthesis, physical characterization, and detection of NO2 and H2S gas sensors

Hydrothermal synthesis and gas sensing properties of lamellar Nickel Titanate

Conductometric H2S Sensors Based on TiO2 Nanoparticles

Enhancing the CO2 sensor response of nickel oxide-doped tin dioxide thin films synthesized by SILAR method

Computational assisted tuning of Co-doped TiO2 nanoparticles for ammonia detection at room temperatures

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Synthesis and density functional theory study of free-standing Fe-doped TiO2 nanotube array film for H2S gas sensing properties at low temperature

Synthesis of graphitic carbon nitride nanosheets decorated spherical‐like nickel oxide composites for carbon monoxide gas‐sensing application

Microextrusion printing of gas-sensitive planar anisotropic NiO nanostructures and their surface modification in an H2S atmosphere

Synthesis and Characterization of TiO2 Nanotubes for High-Performance Gas Sensor Applications

Structural, optical and humidity sensing studies of nickel oxide (NiO) nanoparticles: effect of calcination temperature

Gas Sensing Capabilities of Tio2 Porous Nanoceramics Prepared Through Premature Sintering

Hydrothermally synthesized MXene Ti3C2/Zn2SnO4 based nanocomposite for H2S sensing at room temperature

Nanostructured NiO-polyaniline fibers composite smart material as a room temperature ammonia sensor

Synthesis of In2O3 nano powder by Aloe barbadensis Miller extract and its application as H2S gas sensor

In-depth insight into the structural properties of nanoparticulate NiO for CO sensing

Preparation and Gas Sensitivities of Monoclinic TiO2

High Performance H2S Sensor Based on Ordered Fe2O3/Ti3C2 Nanostructure at Room Temperature