Abstract:The initial unstable stage associated with keyhole plasma arc welding affects the stability and quality heavily, especially in the non-vertical welding position, which is difficult to control and restricts the process development and application. This work clarifies the temperature distribution and flow behavior of the process from the digging keyhole stage to the keyhole stable movement stage via an infrared thermography system and high-speed camera system. The experimental results showed that the molten metal on the rear side of the keyhole gradually accumulates and solidifies on the exit side and rear wall of the keyhole. When enough molten metal accumulates on the keyhole rear sidewall, it closes under the action of surface tension. The angle (86°–90°) of the keyhole rear sidewall formation can be used to determine whether the keyhole rear side is closed and reached the keyhole stable movement stage. Simultaneously, the influence of the shifting direction of gravity on the temperature distribution, flow behavior, and solidification morphology of the keyhole weld pool was investigated, which further revealed the initial unstable stage of the welding process. In the flat position, at this stage, the high-temperature area within the keyhole rear sidewall surface gradually accumulates close to the exit side of the weld pool. More molten metal flows to the keyhole exit side by gravity and shear forces, which causes a separation area on the keyhole rear side that is nearer to the exit side of the weld pool. This makes it harder to close the keyhole wall when it is in a flat position during the initial unstable stage. Furthermore, the temperature distribution and flow behavior of the keyhole rear side can be used as another factor to characterize the flow state of the weld pool in all positions and stages of welding.

Dynamic keyhole behaviors and element mixing in paraxial hybrid plasma-MIG welding with a gap

Coupled Mechanisms of the Keyhole, Energy Transfer and Compositional Change Associated with the Variable Polarity Plasma Arc Process

Numerical Study of Keyhole Behaviors and Thermal Fluid Flow in High Current Plasma Arc Welding

Study on the Depth and Evolution of Keyholes in Plasma-MIG Hybrid Welding

Study of molten pool dynamics in keyhole TIG welding by numerical modelling

Keyhole Welding with Hybrid Plasma-Free Arc Source

Physical mechanism of material flow and temperature distribution in keyhole plasma arc welding at initial unstable stage

A Novel Electrode-Arc-weld Pool Model for Studying the Keyhole Formation in the Keyhole Plasma Arc Welding Process

Interactive Phenomena in Hybrid KPAW–GMAW-P

Droplet Transfer Induced Keyhole Fluctuation and Its Influence Regulation on Porosity Rate during Hybrid Laser Arc Welding of Aluminum Alloys

Fundamental understanding of open keyhole effect in plasma arc welding

Dynamic keyhole profile during high-power deep-penetration laser welding

Elucidation of the Weld Pool Convection and Keyhole Formation Mechanism in the Keyhole Plasma Arc Welding

Effect of droplet transition on the dynamic behavior of the keyhole during 6061 aluminum alloy laser-MIG hybrid welding

Keyhole-induced Pore Formation Mechanism in Laser-Mig Hybrid Welding of Aluminum Alloy Based on Experiment and Multiphase Numerical Model

Analysis of Heat Transfer and Material Flow in Hybrid KPAW-GMAW Process Based on the Novel Three Dimensional CFD Simulation

Interaction Mechanism of Arc, Keyhole, and Weld Pool in Keyhole Plasma Arc Welding: A Review

Influence Mechanisms of Keyhole on the Arc Characteristics in Plasma Arc Welding

Arc and keyhole behavior in narrow-gap oscillating laser-MIG hybrid welding of thick aluminum alloys

Analysis of the energy propagation in the keyhole plasma arc welding using a novel fully coupled plasma arc-keyhole-weld pool model

Modeling of Keyhole-Induced Pore Formation in Laser-Arc Hybrid Welding of Aluminum Alloy with a Horizontal Fillet Joint