Influence of Gas Temperature, Particle Size and Substrate Material on the Deposition Behaviour of Cold Sprayed Magnesium Coatings

X. K. Suo,X. P. Guo,W. Y. Li,M. P. Planche,R. Bolot,H. L. Liao,C. Coddet

DOI: https://doi.org/10.31399/asm.cp.itsc2011p1037

2011-01-01

Abstract:Abstract Magnesium coatings were deposited upon aluminum and stainless steel substrates by cold spraying. Three Mg powders with different particle size distributions were used as feedstock. The microstructures of as-sprayed coatings were evaluated by optical microscopy, and scanning electron microscopy. The coating observations show that a main gas temperature has an important effect on the deposition behaviour of particles. Changing the gas temperature from 350°C to 630°C involves an increase of the deposition efficiency from 1.57% to 19.57%. The effects of the particle size distribution and substrate material on the deposition efficiency of particles were also investigated. The results show that the particle size distribution has a significant effect on the deposition efficiency of particles which increases from 19.57% to 59% when the mean particle size decreases from 63 µm to 38 µm under gas temperature of 630°C. However, the deposition efficiency of particles was slightly influenced by the substrate material. In addition to these experimental results, the in-flight particle velocities were simulated by FLUENT software to point out the effects of the gas temperature and particle size distribution.