Abstract:This paper presents the design, analysis, and validation of a novel redundant planar parallel continuum manipulator (PCM) consisting of four flexible links coupled at the rigid mid-and end-platform. To address complex geometry/static hybrid constraints at the rigid platforms, a general framework is developed for the kinetostatics modeling and analysis. Benefiting from the redundant actuation design, the Cartesian stiffness of the studied PCM can be further adjusted as a secondary task to positioning. Utilizing the proposed deflection-based force sensing method, the external load exerted on the end-effector can also be identified by measuring the pose of rigid platforms. To validate the proposed design, a prototype is built, on which a series of experiments have been conducted. The results show that, with the proposed kinetostatics models, the prototype exhibits a mean position and orientation error of 0.52 mm and 0.41(degrees). Finally, the capability of stiffness-varying and force-sensing is demonstrated to verify the feasibility and potential applications of the designed redundant PCM. Note to Practitioners-This paper is motivated by the need for more adaptable robotic systems in industrial and interactive settings. In this work, a novel redundant parallel continuum manipulator with variable passive compliance and force-sensing capability is presented. This planar manipulator comprises four flexible limbs, each driven by independent linear modules, thus the redundancy in the actuation can be leveraged for varying Cartesian stiffness. By means of measuring the pose of the end-effector, the interaction force exerted on the end-effector can be identified according to the force sensing model. The structural compliance of the manipulator enhances safety in human-robot collaboration, while variable stiffness accommodates the specific requirements of different interaction tasks. Furthermore, the force-sensing capability allows for precise feedback control, significantly improving safety during interactions with humans. Therefore, the presented PCM has the potential for interactive manipulation applications, including delicate and fragile object handling, as well as human-robot collaboration in assembly tasks.

A Portable Fully Coupled Parallel Continuum Manipulator for Nursing Robot: Mechanical Design and Modeling

Modeling and Analysis of Surgical Parallel Continuum Manipulator.

Design Paradigm for Human Size Manipulator with High Payload, Repeatability, and Bandwidth

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Analysis and Validation of a Flexible Limb/Cable Hybrid-Driven Parallel Continuum Manipulator

A Novel Miniature Spring-Based Continuum Manipulator for Minimally Invasive Surgery: Design and Evaluation

Stretched Backboneless Continuum Manipulator Driven by Cannula Tendons

A Novel Master Manipulator with Force Feedback for Robot-Assisted Natural Orifice Transluminal Endoscopic Surgery

Design and Realization of Continuum Manipulator Based on Coupling of Double Parallel Mechanism

A Kind of Kinematics Modeling of 2 DOFs Notched Continuum Manipulator

A Redundant Parallel Continuum Manipulator with Stiffness-Varying and Force-Sensing Capability

Mechanical Design and Workspace Optimization of a Flexible Parallel Manipulator for Minimally Invasive Surgery

Design of a Reconfigurable Planar Parallel Continuum Manipulator with Variable Stiffness

Design and Analysis of 7-DOF Cable-Driven Manipulator

Kinematic Optimization of a Continuum Surgical Manipulator

An Endoscope Manipulating Robot Design

Compliant Manipulation Method for a Nursing Robot Based on Physical Structure of Human Limb

A Novel Design of a Contractible, Tubular Continuum Manipulator

An Optimized Cable Layout Method for Cable-Driven Continuum Robots

Design and Kinematics of a Novel Continuum Robot Connected by Unique Offset Cross Revolute Joints

Study on Modeling and Dynamic Performance of a Planar Flexible Parallel Manipulator Based on Finite Element Method