Abstract:Troublesome drying has always limited the scale-up production and wide-spread application of monolithic aerogels because of the high energy consumption and/or organic solvent utilization. In this report, a gelemulsion-based one step method was developed for the facile, economic and environmentally friendly preparation of various monolithic silica aerogels. The wet porous silica formed in these systems could be dried at ambient-pressure without the need for solvent exchange. It was demonstrated that the stabilities of the gel-emulsions and the resultant wet porous silica gels originate from the utilization of a specially designed stabilizer, which is a derivative of cholesterol (Chol-OH). With the aid of Chol-OH, the chemical functionalities and the densities of the monolithic silica aerogels could be largely tuned via simple variation of the structures of the precursors, organosilanes, and water content in the gel emulsions. As examples, monolithic silica aerogels from super-hydrophobic (water contact angle larger than 150 degrees) to hydrophilic (water contact angle lower than 25 degrees) and those with a density as low as 0.026 g cm(-3) were obtained. Moreover, the internal structures of the aerogels can also be tuned by adjusting the reaction rate of the sol-gel process. Morphology studies revealed that the as prepared monolithic silica aerogels possessed inter-connected highly porous structures, and the pore walls are composed of highly ordered meso-pore structures with an average size of similar to 25 nm. Their thermal conductivities at ambient pressure, humidity, and temperature (30 degrees C) were as low as 20.6 mW m(-1) K-1, which is 18% lower than that of the reference air (24.4 mW m(-1) K-1). Considering the ease of the stabilizer preparation, the gel emulsions, and the characteristics of the aerogel preparation process, we believe that the strategy developed in the present work represents substantial progress in the field of aerogel preparation, and the monolithic silica aerogels created have great potential for real-life applications.

Efficient fabrication, characterization, and<i> in</i><i> vitro</i> digestion of aerogel-templated oleogels from a facile method: Electrospun short fibers

Fabrication of Oleogels Via a Facile Method by Oil Absorption in the Aerogel Templates of Protein-Polysaccharide Conjugates.

Fabrication, Characterization, and in Vitro Digestion of Gelatin/gluten Oleogels from Thermally Crosslinked Electrospun Short Fiber Aerogel Templates

Fabrication of aerogel-templated oleogels from alginate-gelatin conjugates for in vitro digestion

Fabrication of enhanced aerogel template oleogels with enzyme-hydrolyzed soy protein isolate and covalent cross-linking

Development of Food-Grade Oleogel Via the Aerogel-Templated Method: Oxidation Stability, Astaxanthin Delivery and Emulsifying Application

Schiff base cross-linked dialdehyde cellulose/gelatin composite aerogels as porous structure templates for oleogels preparation

Facile Fabrication of Bubbles-Enhanced Flexible Bioaerogels for Efficient and Recyclable Oil Adsorption

Dual-reinforcement strategy: Fabrication of CMC-Na/SPI aerogel-templated oleogels through electrostatic adsorption and chemical crosslinking

Fabrication And Characterization Of Oleogel Stabilized By Gelatin-Polyphenol-Polysaccharides Nanocomplexes

Fabrication of Cellulose Aerogels Using a Green/Clean Procedure

Fabrication of Elastic Silica-Bacterial Cellulose Composite Aerogels with Nanoscale Interpenetrating Network by Ultrafast Evaporative Drying

Emulsion-templated, hydrophilic-oleophobic aerogels with flexibility, stretchability and recyclability

An economic and environmentally benign approach for the preparation of monolithic silica aerogels

Synergistic strategy of hard-template etching and soft-template protection for rapid fabrication of aerogel short fibers

Oil/water separation using elastic bio-aerogels derived from bagasse: Role of fabrication steps

Fabrication of Biomass-Derived Carbon Aerogels with High Adsorption of Oils and Organic Solvents: Effect of Hydrothermal and Post-Pyrolysis Processes

Facile fabrication of compressive aerogels with novel core/shell fibrous skeleton for oil sorption and thermal evaporation

Aerogel Fibers Made via Generic Sol‐Gel Centrifugal Spinning Strategy Enable Dynamic Removal of Volatile Organic Compounds From High‐Flux Gas

Exploring the properties of gelatin/chitosan bioaerogel scaffolds: Toward ultra‐light and highly porous materials

Bio-aerogels: Fabrication, properties and food applications