Abstract:Two commercialized solid additives thieno[3,2‐b]thiophene (TT) and 3,6‐dibromothieno[3,2‐b]thiophene (TTB) are used to delicately regulate the blend film packing and crystallinity. High efficiencies of 17.75% with impressive thermal stability (T80 > 2800 h, 65 °C) and excellent photostability are achieved for TT‐treated PM6:Y6 devices and a significantly higher PCE of 18.3% is achieved employing D18:L8‐BO. Delicately manipulating nanomorphology is recognized as a vital and effective approach to enhancing the performance and stability of organic solar cells (OSCs). However, the complete removal of solvent additives with high boiling points is typically necessary to maintain the operational stability of the device. In this study, two commercially available organic intermediates, namely thieno[3,2‐b]thiophene (TT) and 3,6‐dibromothieno[3,2‐b]thiophene (TTB) are introduced, as solid additives in OSCs. The theoretical simulations and experimental results indicate that TT and TTB may exhibit stronger intermolecular interactions with the acceptor Y6 and donor PM6, respectively. This suggests that the solid additives (SAs) can selectively intercalate between Y6 and PM6 molecules, thereby improving the packing order and crystallinity. As a result, the TT‐treated PM6:Y6 system exhibits a favorable morphology, improved charge carrier mobility, and minimal charge recombination loss. These characteristics contribute to an impressive efficiency of 17.75%. Furthermore, the system demonstrates exceptional thermal stability (T80 > 2800 h at 65 °C) and outstanding photostability. The universal applicability of TT treatment is confirmed in OSCs employing D18:L8‐BO, achieving a significantly higher PCE of 18.3%. These findings underscore the importance of using appropriate solid additives to optimize the blend morphology of OSCs, thereby improving photovoltaic performance and thermal stability.

An Organic Small Molecule As a Solid Additive in Non-Fullerene Organic Solar Cells with Improved Efficiency and Operational Stability

Simultaneously Enhancing Exciton/Charge Transport in Organic Solar Cells by an Organoboron Additive

A Broad-Spectrum Solid Additive to Further Boost High-Efficiency Organic Solar Cells via Morphology Regulation

Simple benzothiadiazole-based small molecules as additives for efficient organic solar cells

Simultaneously Enhanced Efficiency and Operational Stability of Nonfullerene Organic Solar Cells via Solid‐Additive‐Mediated Aggregation Control

Highly Efficient and Stable Organic Solar Cells Enabled by a Commercialized Simple Thieno[3,2‐b]thiophene Additive

Synergistic Effect of Solvent and Solid Additives on Morphology Optimization for High-Performance Organic Solar Cells

Additive-induced intermolecular interaction enhancement enables highly efficient organic solar cells

Synergistic Effects of Solid and Solvent Additives on Film Morphology Enable Binary Organic Solar Cells with Efficiency of Over 19%

High performance organic solar cells enabled by an iodinated additive

Solid Additive Delicately Controls Morphology Formation and Enables High‐Performance in Organic Solar Cells

Gradual Optimization of Molecular Aggregation and Stacking Enables Over 19% Efficiency in Binary Organic Solar Cells

Synchronous Regulation of Donor and Acceptor Microstructure using Thiophene‐Derived Non‐Halogenated Solvent Additives for Efficient and Stable Organic Solar Cells

Simultaneously Optimizing Molecular Stacking and Phase Separation via Solvent‐Solid Hybrid Additives Enables Organic Solar Cells with over 19% Efficiency

19.0% Efficiency Binary Organic Solar Cells Enabled by Using a Building Block As Solid Additive

In Situ Removable Additive Assisted Organic Solar Cells Achieving Efficiency over 19% and Fill Factor Exceeding 81%

Morphology Optimization by Non‐Halogenated and Twisted Volatile Solid Additive for High‐Efficiency Organic Solar Cells

Solid Additive Enables Organic Solar Cells with Efficiency up to 18.6

Isomerization Engineering of Solid Additives Enables Highly Efficient Organic Solar Cells via Manipulating Molecular Stacking and Aggregation of Active Layer

Blade-coated efficient and stable large-area organic solar cells with optimized additive

Solid Additive Modulates Acceptor Crystallization to Achieve 19.11% Efficiency and High Storage Stability in Organic Solar Cells