Abstract:Nitrogen-enriched porous carbon has been a promising material for CO2 capture in the recent decades. To enhance the performance of CO2 adsorption, both an N-active site and the textural properties are crucial determinants. Herein, ultra-microporous carbon with N-active species was prepared using two synthesis procedures: 1) one-step carbonization of a polybenzoxazine (PBZ) precursor at 800 °C, and 2) the CO2 activation process at 900 °C. The activated porous carbon had the higher specific surface area (943 m2/g) and a total pore volume (0.51 cm3/g) compared to un-activated porous carbon (335 m2/g and 0.19 cm3/g, respectively). In addition, the presence of N-active species such as pyridine-N, secondary-N, pyridone-N, and oxide-N in the carbon structures could be clearly observed in the high-resolution XPS spectra. The CO2 adsorption measurement was performed at 30 and 50 °C under a wide range of pressures (1-7 bar). The maximum amount of CO2 uptake was ca. 3.59 mmol/g for the activated porous carbon operated at 30 °C and a CO2 pressure of 7 bar, which was due to the high specific surface area and the large micropore volume. Specifically, carbon with a 3D interconnected pore structure, derived from the sol-gel process of the PBZ precursor, exhibited good structural stability and consequently led to better absorption capability under the high atmospheric pressure of CO2. The enhanced CO2 adsorption capability for the as-prepared porous carbon was based on two mechanisms: physisorption as a result of textural properties and chemisorption as a result of the acid-base interaction between the basic N functionality and the acidic CO2 gas. All results suggested that ultra-microporous carbon with N-active species prepared from polybenzoxazine is a promising adsorbent for CO2 capture and storage, which can be used at a wide range of pressures and in many applications e.g. flue gas adsorption and natural gas production.

Porous carbon based on polyvinylidene fluoride: Enhancement of CO2 adsorption by physical activation

Optimal Activation of Porous Carbon for High Performance CO2 Capture

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Carbon dioxide adsorption on poly(vinylidene chloride)-based carbons with ultrahigh microporosities prepared by facile carbonization

Resorcinol–formaldehyde Resin-Based Porous Carbon Spheres with High CO2 Capture Capacities

Tuning porosity of coal-derived activated carbons for CO2 adsorption

Effect of Porosity Parameters and Surface Chemistry on Carbon Dioxide Adsorption in Sulfur-Doped Porous Carbons

Enhanced CO2 capturing over ultra-microporous carbon with nitrogen-active species prepared using one-step carbonization of polybenzoxazine for a sustainable environment

CO2 adsorption by activated templated carbons

Ultra-microporous Biochar-Based Carbon Adsorbents by a Facile Chemical Activation Strategy for High-Performance CO2 Adsorption

Ultra-microporous biochar-based carbon adsorbents by a facile chemical activation strategy for high-performance CO 2 adsorption

Porous Carbon for CO2 Capture Technology: Unveiling Fundamentals and Innovations

Superior CO2 Adsorption on Pine Nut Shell-Derived Activated Carbons and the Effective Micropores at Different Temperatures

Synthesis and characterization of polyphenylene sulfide resin-derived S-doped porous carbons for efficient CO 2 capture

Porous Polyimide-Based Activated Carbon Fibers for CO 2 Capture and Supercapacitor

N-doped hierarchically porous carbons prepared with the assistance of chemical blowing and in-situ hard template as highly efficient CO 2 adsorbents: A combined experimental and theoretical study

Efficient Production of Activated Carbon with Well-Developed Pore Structure Based on Fast Pyrolysis-Physical Activation

One-pot synthesis of self S-doped porous carbon for efficient CO2 adsorption

Nitrogen-Doped Ultrahigh Microporous Carbons Derived from Two Nitrogen-Containing Post-Cross-Linked Polymers for Efficient CO2 Capture

Highly Selective CO2 Capture on Waste Polyurethane Foam-Based Activated Carbon