Abstract:In this work, an examination on the modal properties of a single-span steel-frame footbridge is presented. The footbridge is situated in Jawornik (Lesser Poland). The footbridge is symmetrical since its main structure consists of two steel frames of the same shape. The boundary conditions for both frames are the same as well. The study was completed on the basis of numerical as well as experimental investigations. For finite element (FE) analysis, a 3-D model of the single-span steel-frame footbridge was created. For the experimental study, a research scheme for in situ tests was developed. Three kinds of excitation techniques were used during the in situ tests: shock excitation, operational vibration, and slow sine sweep testing. Different functions that estimate natural frequencies, i.e., the power spectral density function (PSD) and the frequency response function (FRF), were applied. The modal assurance criterion (MAC) was used as a mathematical tool for the verification of the mode shapes of natural vibrations obtained in experimental and numerical ways. Good compatibility was recognized between the results obtained for experimental and numerical procedures in terms of both the natural frequency and the mode of vibration. The identified and verified values of the five consecutive natural frequencies of the footbridge were smaller than 5 Hz, but they were recognized as being located outside the frequency range defined as having “maximum risk of resonance". The numerical and experimental modal analysis revealed that all modes corresponding to the natural frequencies from the 0–5 Hz range have both a symmetrical and an anti-symmetrical nature. In particular, the first vertical mode, which can play a central role from the serviceability of the footbridge point of view has a symmetrical shape. The results of the research might be applicable to the dynamic study of the structure type considered in the analysis, i.e., for the dynamic assessment of a single-span steel-frame footbridge with a relatively large mass as well as stiffness. The investigation proved that ambient vibration modal experiments are enough for the experimental investigation of the modal properties of the structure.

Development of Natural Frequency in Multi-Span Composite Bridges with Variable Cross-Section: Analytical and Numerical Solutions

Experimental Study and Numerical Analysis of A Composite Bridge Structure

A Numerically Stable Dynamic Coefficient Method and Its Application in Free Vibration of Partial-Interaction Continuous Composite Beams

On the Natural Frequency and Vibration Mode of Composite Beam with Non-Uniform Cross-Section

Non-linear analysis of multi-span composite beams under combined flexure and torsion

Frequency Estimate and Adjustment of Composite Beams with Small Periodicity

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Natural Characteristics of Long Span Bridge under Initial Load: a Case Study of Minpu Bridge

Vibration and Thermal Buckling Analyses of Multi-Span Composite Lattice Sandwich Beams

Full-Scale Experimental and Numerical Investigations on the Modal Parameters of a Single-Span Steel-Frame Footbridge

Free Vibration Analysis of Horizontally Curved Composite Concrete-Steel I-Girder Bridges

4D Full-Scale Finite Element Analysis of Long-Span Composite Box Girder Bridges

Strength of Multi-Span Composite Beams Subjected to Combined Flexure and Torsion

An Analytical Method and Its Extension for Linear Modal Analysis of Beam-Type Systems Carrying Various Substructures

Estimation Formulas for Natural Frequencies of Girder Bridge and Continuous Rigid Frame Bridge

Multi-scale design of composite material structures for maximizing fundamental natural frequency

4D Full-Scale Finite Element Analysis in Bridge Engineering

Dynamic Characteristics Analysis of Partial-Interaction Composite Continuous Beams

Numerical Simulations of Multilayer Surfacing Systems on Orthotropic Steel Deck Bridges

Dynamic Performance Investigation of a Long-Span Suspension Bridge Using a Bayesian Approach

Modeling and Analysis of 1:3 Internal Resonance of Suspension Bridge Under Boundary Excitations