Abstract:An efficient cooling method for the turbine inner casing is essential with the increasing of the turbine inlet temperature. The heat transfer and flow characteristics of a coupled cooling system in the turbine inner casing part, i.e., three rows of impingement jets and film holes, have been studied numerically according to the real turbine operating conditions. Seven inclined angles of the film holes along the mainstream direction (90°, ±60°, ±45°, ±35°) and the impingement jets arrangements have been researched. The positive inclination is that the angle between the fluid flow from the film holes and the mainstream is less than 90°. Otherwise, it would be negative. The numerical validation reveals that the selected computational method can provide a good prediction of the reported experimental results of the impinging-film cooling system. Then the method has been applied in the investigation of the local/average temperature, film-cooling effectiveness, and the flow patterns on the film-cooled surface. The results show that the inclined angle can achieve a significant improvement in the film cooling performance. With the positive inclination of film holes, the average temperature of the interaction surface between the mainstream and the turbine inner casing can decrease 50K compared with that of 90°. And the average temperature on the interaction surface with the negative inclined angle can even be reduced by more than 100K. Additionally, the average film-cooling effectiveness can be increased by up to 31.79%. Such results prove that decreasing the value of inclined angle can achieve a better heat transfer performance. Moreover, the negative inclination of film holes can improve the uniformity of the film-cooling effect. On the other hand, the influence of impingement jets arrangements on the film cooling behavior is negligible. Further analysis of the flow streamline illustrates that the coolant jet from the inclined film holes can attach to the interaction surface more firmly, which will achieve a better protection away from the high-temperature turbine gas. The research will provide direct guidance for the cooling design of the turbine inner casing and improve the thermal efficiency of the gas turbine system.

Experimental Investigation on Heat Transfer Characteristics in an Impingement/Effusion Cooling System of a Ribbed Turbine Casing

Numerical Investigation of Impingement Heat Transfer on Smooth and Roughened Surfaces in a High-Pressure Turbine Inner Casing

NUMERICAL INVESTIGATION OF IMPINGING-FILM HEAT TRANSFER AND FLOW CHARACTERISTICS OF TURBINE INNER CASING

Multiple-jet impingement heat transfer in double-wall cooling structures with pin fins and effusion holes

NUMERICAL STUDY ON THE FLOW AND HEAT TRANSFER CHARACTERISTICS WITH DIFFERENT RIB STRUCTURES PLACED ON THE IMPINGEMENT PLATE

Experimental and Numerical Study on Impingement Heat Transfer and Flow Characteristics on a Semicircular Ribbed Target Surface

Numerical Investigation of Flow and Heat Transfer in Vane Impingement/Effusion Cooling with Various Rib/Dimple Structure

Experimental and Numerical Investigation of Impingement Heat Transfer on the Surface with Micro W-shaped Ribs

A comparative study of internal heat transfer enhancement of impingement/effusion cooling roughened by solid rib and slit rib

Investigation of the roughened target plate to enhance the impingement heat transfer with reduced pressure loss

Jet impingement heat transfer performance in a double-wall cooling structure with film effusion holes and pin fins

Effect of Film Cooling Arrangement on Impingement Heat Transfer on Turbine Blade Leading Edge

Impingement cooling experiment of structured surface with micro-W-shaped ribs

Flow Field And Heat Transfer Characteristics In An Impingement/Effusion Cooling System For Combustor Liner

Heat transfer enhancement of return channel by using rib turbulator for a new impingement cooling scheme

Experimental Study of Heat Transfer Characteristic on Jet Impingement Cooling with Film Extraction Flow

An Experimental Study of Impingement Heat Transfer on the Surfaces with Micro W-Shaped Ribs

Experimental Heat Transfer and Cooling Effectiveness over an Effusion Wall with Internal Jet-Array Impingement: Influence of Hole Arrangement

Local Heat Transfer Measurements in Narrow Impingement Channel by Transient Liquid Crystal Technique

Influence of Surface Curvature and Jet-to-surface Spacing on Heat Transfer of Impingement Cooled Turbine Leading Edge with Crossflow and Dimple