Abstract:The stiffness modulation mechanism for soft robotics has gained considerable attention to improve deformability, controllability, and stability. However, for the existing stiffness soft actuator, high lateral stiffness and a wide range of bending stiffness are hard to be provided at the same time. This paper presents a bioinspired bidirectional stiffening soft actuator (BISA) combining the air-tendon hybrid actuation (ATA) and a bone-like structure (BLS). The ATA is the main actuation of the BISA, and the bending stiffness can be modulated with a maximum stiffness of about 0.7 N/mm and a maximum magnification of 3 times when the bending angle is 45 deg. Inspired by the morphological structure of the phalanx, the lateral stiffness can be modulated by changing the pulling force of the BLS. The lateral stiffness can be modulated by changing the pulling force to it. The actuator with BLSs can improve the lateral stiffness about 3.9 times compared to the one without BLSs. The maximum lateral stiffness can reach 0.46 N/mm. And the lateral stiffness can be modulated decoupling about 1.3 times (e.g., from 0.35 N/mm to 0.46 when the bending angle is 45 deg). The test results show the influence of the rigid structures on bending is small with about 1.5 mm maximum position errors of the distal point of actuator bending in different pulling forces. The advantages brought by the proposed method enable a soft four-finger gripper to operate in three modes: normal grasping, inverse grasping, and horizontal lifting. The performance of this gripper is further characterized and versatile grasping on various objects is conducted, proving the robust performance and potential application of the proposed design method.

C-Shaped Bidirectional Stiffness Joint Design for Anthropomorphic Hand.

Design and Simulation Experiment of Rigid-Flexible Soft Humanoid Finger

A Bioinspired Gripper with Sequential Motion and Mutable Posture Enabled by Antagonistic Mechanism

Soft Humanoid Hand with C-Shaped joint and Granular-Jamming Palm.

Mechanical design, modeling, and identification for a novel antagonistic variable stiffness dexterous finger

Design and Stiffness Analysis of a Bio-inspired Soft Actuator with Bi-direction Tunable Stiffness Property

Endoskeleton Soft Multi-Fingered Hand with Variable Stiffness

A Novel Design of a Multi-Fingered Bionic Hand With Variable Stiffness for Robotic Grasp

Design of Humanoid Robotic Hand Based on Link Underactuation

A Novel Coupled and Self-adaptive Anthropomorphic Robot Finger with a Dual-oblique-Belt Mechanism.

A Novel Tactile Sensing Array with Elastic Steel Frame Structure for Prosthetic Hand.

CATCH-919 Hand: Design of a 9-actuator 19-DOF Anthropomorphic Robotic Hand

A Bioinspired Bidirectional Stiffening Soft Actuator for Multimodal, Compliant, and Robust Grasping

Torsional Stiffness Improvement of a Soft Pneumatic Finger Using Embedded Skeleton

Towards higher load capacity: innovative design of a robotic hand with soft jointed structure

A Flexible Self-Adaptive Underactuated Hand With Series Passive Joints

Bioinspired Bidirectional Stiffening Soft Actuators Enable Versatile and Robust Grasping

Design and analytical modeling of a double-joint flexible surgical instrument with hand-held isomorphic actuation

Modeling and Control of a Novel Variable Stiffness Three DoFs Wrist

Multijointed Pneumatic Soft Hand with Flexible Thenar

Double-Source Fluid Bending And Side-Swing Compound Multi-Joint Finger