Abstract:The iterated fission probability(IFP)method and Contributon-linked eigen-value sensitivity/uncertainty estimation via track-length importance characterization(CLUTCH)method are commonly used by many Monte Carlo codes for the sensitivity analysis of k-eigenvalue to continuous-energy nuclear data.The memory consumption of the IFP method is huge and the CLUTCH method is proposed to reduce the memory usage of the IFP method.However,it's hard to tally sufficiently-converged importance weighting functions for the mesh-based CLUTCH(CLUTCH-Mesh)method for large-scale problems,such as AP1000 whole core problem,subsequently reducing the accura-cy of sensitivity coefficients calculated by the CLUTCH method.Therefore,the function expansion tally(FET)was used to tally importance weighting functions in the CLUTCH(CLUTCH-FET)method in this paper.Legendre polynomial was selected as the basic function of FETs and both segmented FETs with low orders and the global FET with the high order were implemented.During the tally process of FETs,the spatial locations of particles should be projected into domains of definition firstly,and then the tally scores of function expansion coefficients were obtained and accumulated.By averaging function expansion coefficients among inactive cycles,the FET was finished.The FETs were used for both ancestor fission neutrons distribution in original generations and the averaged progenies of the ancestor fission neutron in asymptotic generations.Based on the method mentioned above,the IFP,CLUTCH-Mesh and CLUTCH-FET methods were implemented in Monte Carlo code NECP-MCX.The veri-fications were conducted among Godiva,Flattop and AP1000 whole core problems by comparing the sensitivity results of CLUTCH-Mesh method,CLUTCH-FET method and the IFP method,whose results were selected as the reference.The numerical results indicate that for small-scale problems,such as Godiva and Flattop problems,the CLUTCH-Mesh and CLUTCH-FET methods are able to calculate the sensitivity results with the same high precision as the IFP method.In addition,the tally efficiency of CLUTCH-Mesh method equals to that of the CLUTCH-FET method and the tally efficiency of these two methods are significantly higher than that of the IFP method.For large-scale problems,such as the AP1000 whole core problem,large bias exists between the sensitivity results of the CLUTCH-Mesh method and those of the IFP method because very large number of particles are needed to obtain sufficiently-converged impor-tance weighting functions.However,the CLUTCH-FET method remains high accuracy and tally efficiency for large-scale problems.The FOM(figure of merit)values of the CLUTCH-FET method can be increased by 5.2 and 6.0 times when compared to those of the IFP method and the CLUTCH-Mesh method,respectively.Therefore,the CLUTCH-FET method is recommended for sensitivity calculation of large-scale prob-lems.Segmented FETs with low orders are more recommended than a global FET with high order to avoid under-fitting or over-fitting problems.

Improvement of the Clutch Method for Sensitivity Analysis of K-Eigenvalue to Continuous-Energy Nuclear Data in Necp-Mcx

Computing Eigenvalue Sensitivity Coefficients to Nuclear Data Based on the CLUTCH Method with RMC Code

Development of Sensitivity Calculation Capability of Legendre Moments of Scattering Angular Distributions in NECP-MCX

Preliminary Application of Function Expansion Tally in CLUTCH Method

Nuclear Data Sensitivity and Uncertainty Analysis for Generalized Response with RMC Code

Sensitivity Analysis of Continuous-energy Nuclear Data and Its Application in AP1000

Improving Tally Efficiency and Accuracy of Multi-Group Scattering Matrix Calculations in the Monte Carlo Code NECP-MCX

New Strategies of Sensitivity Analysis Capabilities in Continuous-Energy Monte Carlo Code RMC

Preliminary Study of Generalized Sensitivity Analysis with Continuous-Energy Monte Carlo Code RMC

ICONE23-1215 APPLICATION OF WIELANDT METHOD IN CONTINUOUS-ENERGY NUCLEAR DATA SENSITIVITY ANALYSIS WITH RMC CODE

Computing Eigenvalue Sensitivity Coefficients to Nuclear Data by Adjoint Superhistory Method and Adjoint Wielandt Method Implemented in RMC Code

Calculating the K-Eigenvalue Sensitivity to Typical Geometric Perturbations with the Adjoint-Weighted Method in the Continuous-Energy Reactor Monte Carlo Code RMC

Recent Progresses of Research on Sensitivity and Uncertainty Analysis for Reactor-Physics Calculation at XJTU

The Neutron-Photon-coupling Analysis of the Tritium-Breeding Blanket in CFETR by NECP-MCX

Improved Generalized Perturbation Theory Method for Sensitivity Analysis of Generalized Response Function

Monte Carlo Simulation in the Reaction Rate's Calculation with Neutron-Activation Method

Improvement of Sensitivity and Uncertainty Analysis Capabilities of Generalized Response in Monte Carlo Code RMC

Analysis And Improvement Of Global-Local Self-Shielding Calculation Scheme For Aic Control Rods

Development and Application of Deep Penetrating Cross-scale Radiation Field Analysis Software NECP-MCX

Eigenvalue Sensitivity and Uncertainty Analysis Based on Classical Perturbation Theory

Combining Total Monte Carlo and Benchmarks for nuclear data uncertainty propagation on an LFRs safety parameters