Abstract:In order to get a better hygrothermal stress and failure prediction for CFRP laminate, an RVE model was established. Wet and thermal stress were coupled using a sequential method. Macroscopic and microscopic subroutines were developed to calculate the stress–strain field of CFRP laminate and RVE model. A multiscale numerical simulation of three‐point bending of moisture‐saturated CFRP laminate was conducted. A mesoscopic representative volume element (RVE) model of carbon fiber reinforced polymers (CFRP) laminate with 15 plies was established based on the principle of fiber random disturbance. The RVE model was validated by comparing the elastic parameters calculated by the RVE model, Chamis model, and Bridge model. Wet stress and thermal stress were coupled using a sequential method. Macroscopic and microscopic subroutines were developed to calculate the stress–strain field of CFRP laminate and RVE model. A multiscale numerical simulation of three‐point bending of moisture‐saturated CFRP laminate was conducted. Failure process and failure modes of CFRP laminate were discussed based on the multiscale simulation and SEM observations. The results show that the RVE model and the multiscale simulation strategy presented in this work can predict the coupled hygrothermal stress and the strength degradation due to moisture absorption very well. The maximum error between the simulated and experimental averaged force of the moisture‐saturated CFRP laminate subjected to three‐point bending is about 3.4%. Multiscale simulation demonstrated that uneven distribution of fibers can result in the fiber/matrix interfaces bearing a larger transverse stress in the fiber's dense distribution area. It is the main reason that results in fiber/matrix interface failure of CFRP laminates working in hygrothermal environments. Highlights A RVE model of CFRP laminate was presented using fibers random disturbance. Coupled hygrothermal stress of single fiber and surrounded matrix was obtained. A multiscale simulation of the strength change of the CFRP plate due to wet‐thermal stress was conducted. Failure modes of CFRP laminate are discussed based on the multiscale simulation.

Numerical Simulation on Mechanical Properties and Damage Behavior of CFRP with Self-Healing Microvascular Channels

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Investigation on Microcapsule Self‐healing Mechanism of Polymer Matrix Composites Based on Numerical Simulation

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Micromechanical Modeling of Damage Evolution and Mechanical Behaviors of CF/Al Composites under Transverse and Longitudinal Tensile Loadings.

3D Orthogonal Woven Carbon/Carbon Composites: Micromechanical Modeling and Damage Analysis

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

Numerical and Experimental Investigation on Mechanical Responses of Plain Woven CFRP Composite under Various Loading Cases

Rate-dependent mechanical and self-monitoring behaviors of 3D printed continuous carbon fiber composites

A Numerical Method for Simulating the Microscopic Damage Evolution in Composites under Uniaxial Transverse Tension

Study on Interlaminar Shear and Damage Behavior of Carbon Fiber Composites with Short Fiber Interleaves: 2. Micro-Mechanical Simulation

Meso-Scale Damage Simulation of 3D Braided Composites under Quasi-Static Axial Tension

Microscopic Progressive Damage Simulation of Unidirectional Composite Based on the Elastic–plastic Theory

Numerical Analysis Architecture of Mechanical Behaviors Simulation for FRP Laminated Strucutres

A Microscopic Elasto-Plastic Damage Model for Characterizing Transverse Responses of Unidirectional Fiber-Reinforced Polymer Composites

Constitutive Model and Damage of Self-Healing 3D Braided Composites with Microcapsules

Different Effects of Interfacial Properties on the Tensile and Compressive Damage Mechanisms of 3D Woven Composites: Multiscale Damage Model and Numerical Comparative Study

Multiscale simulation of hygrothermal stress and mechanical properties degradation of carbon fiber reinforced polymers laminates

Development of a Numerical Material Model for Axial Crushing Mechanical Characterization of Woven CFRP Composites

Parameterized meso-scale modeling and experimental study on the tensile damage evolution and strength of 3D five-directional braided composites