Abstract:In the structured illumination microscopy (SIM) family, interferometric implementations using traditional physical gratings or advanced liquid crystal on silicon spatial light modulators are popular but have the disadvantages of expensive and limited speed. A promising alternative of a digital micromirror device (DMD) has improved the situation for its lower cost and higher speed, furthermore, it has contributed to the proposal of a simple and compact projection DMD-SIM. However, the projection DMD-SIM method is accused of erroneously measuring the resolution because of the scattering characteristic of gold beads, despite the inferior experimental resolution that is because of the low fringe contrast and the resulting low signal-to-noise ratio (SNR). As an improvement, we use a high-brightness laser for illumination to achieve higher SNR, and the accompanying problems of speckle and inhomogeneity originating from the laser’s high coherence are solved by a high-frequency phase-randomization deformable mirror in conjunction with a square-core multimode fiber, which does not limit the image acquisition speed and with fewer energy losses compared to the existing methods. Also, in terms of the problem of low SNR, we apply a parallel-iteration Richardson–Lucy deconvolution algorithm for SIM reconstruction to further improve the imaging performance based on ensuring the resolution. Based on these advances, we image fluorescent nanoparticles and other non-biological and biological fluorescent samples, and the experimental results demonstrate the improved imaging performance of our modified system.

Near-Infrared Speckle-Illumination Imaging Based on a Multidimensionally Disordered Fiber Laser

Speckle-free Laser Projection Structured Illumination Microscopy Based on a Digital Micromirror Device

Imaging through scattering layers using a near-infrared low-spatial-coherence fiber random laser

Phase-coded Speckle Illumination for Laser Fourier Ptychographic Microscopy

Ghost Imaging with N-order Speckle Light

Non-invasive imaging using a low-spatial-coherence multimode random polymer fiber laser

Imaging through opacity using a near-infrared low-spatial-coherence fiber light source.

High‐Power Multimode Random Fiber Laser for Speckle‐Free Imaging (ann. Phys. 12/2021)

Multimode Random Fiber Laser for Speckle Free Imaging

Non-Invasive Imaging Based On Low Spatial Coherence Multimode Random Fiber Laser Illumination

Lensless Multi-Core-fiber-based Imaging from Speckle Autocorrelation under Highly Coherent Illumination

Multimode Fiber Speckle Imaging Using Integrated Optical Phased Array and Wavelength Scanning

Spatially Variant Deblur and Image Enhancement in a Single Multimode Fiber Imaged by Deep Learning

Coherent Random Fiber Laser-Enabled Super-Resolution Spectroscopy

Angular Spectra Tunable Random Lasing for High Contrast Imaging

Nanolasers with Feedback as Low-Coherence Illumination Sources for Speckle-Free Imaging: A Numerical Analysis of the Superthermal Emission Regime

Novel Illumination for Imaging Using Self-Modulated Coherent Random Fiber Laser

Efficient single-pixel imaging based on a compact fiber laser array and untrained neural network

Wavelength-dependent speckle multiplexing for imaging through opacity

Speckle-based 3D sub-diffraction imaging through a multimode fiber

Compact speckle spectrometer using femtosecond laser-induced double-sided surface nanostructures