An Electrochemically Deposited Ordered Hierarchical Metal–organic Framework-Based Dual-Module Sensor for Decoding Organic Vapors

Sijia Qin,Min Chen,Limin Wu

DOI: https://doi.org/10.1039/d2ta04680f

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:A dual-module lanthanide MOF film with three-dimensional ordered macro-microporous structure was fabricated to discriminate six amines, enabling a multi-analyte recognition decoding scheme.

What problem does this paper attempt to address?

Metal‐Organic Frameworks‐Derived Porous In2O3 Hollow Nanorod for High‐Performance Ethanol Gas Sensor

Kai Tao,Xue Han,Qing Yin,Ding Wang,Lei Han,Liang Chen

DOI: https://doi.org/10.1002/slct.201701752

2017-01-01

ChemistrySelect

Abstract:Designing hollow micro/nano structures for gas sensing materials is highly desirable for boosting gas sensing properties and still remains challenging, especially through a simple and economic way. Herein, porous In2O3 hollow nanorod (In2O3-HNR), which was successfully fabricated by thermal decomposition of an In-MOF (CPP-3) precursor, was applied as gas sensing materials. The pristine CPP-3 and obtained In2O3-HNR were systematically characterized by various techniques, such as XRD, SEM, TEM, TGA-DTA, XPS, Raman and N-2 physisorption. Characterization results indicated that the hexagonal rod-like shape of original CPP-3 was maintained after calcination, whereas the surface became rough and concave. In addition, the obtained In2O3-HNR displayed a hollow interior with porous shell composed by In2O3 nanoparticles (9 nm). Taking advantage of this unique porous nanostructure, In2O3-HNR exhibited a response as high as 6.2 to 5 ppm ethanol at operating temperature of 200 degrees C, fast response and recovery (3 and 4 s, respectively), and good selectivity to ethanol. The excellent ethanol-sensing properties endow this In-MOF templated In2O3-HNR material with a promising application in practical detection of ethanol gas. This method could be extended to the fabrication of other micro/nano structures with well-defined morphology and composition for high-performance gas sensing considering diversity of MOFs family.
Facile Fabrication of a Multifunctional Metal-Organic Framework-based Sensor Exhibiting Exclusive Solvochromic Behaviors Toward Ketone Molecules

Bao Li,Xi Chen,Peng Hu,Angelo Kirchon,Yu-Meng Zhao,Jiandong Pang,Tianle Zhang,Hong-Cai Zhou

DOI: https://doi.org/10.1021/acsami.8b19815

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:To probe the efficient strategy for preparing a multifunctional sensing material, the facile synthesis strategies and successful examples are urgently required. Through the utilization of a hexadentate ligand derived from cyclotriphosphazene, which displays spiral configurations and multiple connection modes, a novel metal-organic framework (MOF) was constructed via one-step synthesis from low-cost raw materials. The presence of multiple interaction sites decorating the helical channels of the reported MOF gives rise to exclusive solvochromic-sensing behavior for small ketone molecules such as acetone, acetophenone, and 2,5-diketohexane. Additionally, the helical structure of a manganese-carboxylate chain allows for the pore volume not only be available for the adsorption of large organic molecules but also enables the enantiopure selective separation of 1-phenylethanol (ee 35.99 %). Furthermore, the structural analysis of the acetophenone-encapsulated sample allowed the solvochromic mechanism to be elucidated, which should be ascribed to the strong hydrogen-bonding interaction between the guest molecules and specific sites on a host matrix. The experimental results have not only clearly manifested the vital role of starting materials of MOFs, including the connection modes and spatial configuration, but also have provided very valuable insight for the future assembly of novel multifunctional sensing materials.
Highly Selective and Sensitive Detection of Volatile Sulfur Compounds by Ionically Conductive Metal-Organic Frameworks

Li Li,Shiqi Zhang,Yang Lu,Junyao Zhang,Xuan Zhang,Ruizhi Wang,Jia Huang

DOI: https://doi.org/10.1002/adma.202104120

IF: 29.4

2021-01-01

Advanced Materials

Abstract:High selectivity to specific analyte is essential for chemical sensors but difficult to achieve. For most chemical sensors, although the response to the target analyte can be more significant than interference analytes, they still show obvious responses to the interference analytes. Here, highly selective chemical sensors are developed with negligible responses to other interference vapors. Instead of the widely investigated electronically conductive metal-organic frameworks (EC-MOFs), ionically conductive MOFs (IC-MOFs) are used as the sensing materials, and the unique interaction between the ion charge carrier and the analyte is utilized to achieve high sensing selectivity. Through the modulation of the metal nodes (Cu, Co, Ni, Zn, Mg) and organic ligands (H2TCPP, H2THPP, H4BTEC), sensor arrays based on a set of IC-MOFs are fabricated and achieve highly selective detection toward volatile sulfur compounds (VSCs). H2S and CH3SH can be selectively detected at concentrations down to 1 ppb and 1 ppm, respectively. The facile preparation and low cost endow the device with disposability. These results suggest new approaches for the development of highly selective chemical sensors.
A Single Bimetallic Lanthanide-Based Metal-Organic Frameworks for Visual Decoding of a Broad Spectrum of Molecules.

Xiaoliang Zeng,Zhou Long,Xiaofang Jiang,Yajun Zhang,Qi Liu,Jing Hu,Chenghui Li,Li Wu,Xiandeng Hou

DOI: https://doi.org/10.1021/acs.analchem.0c00324

IF: 7.4

2020-01-01

Analytical Chemistry

Abstract:Distinguishing the delicate structural differences among molecules is a critical and challenging task in biological/chemical analysis. A molecular decoding strategy has recently become promising to differentiate similar molecules, which is advantageous over the common sensing methods mostly used for detecting a single target. However, the design of an ideal molecular decoder is still strictly hindered by the tailored preparation of probes for particular molecules and the severe lack of widespread feasibility. We herein for the first time proposed to use single bimetallic lanthanide-based metal-organic frameworks (Ln-MOFs) as a powerful, versatile probe for fast and facile decoding of homologues, isomers, enantiomers, and even deuterated isotopomers, based on the unique host-guest interaction of a specific target with the Ln-MOF which could provide an according visual output based on the modulated energy transfer process.
Area-selective and Precise Assembly of Metal Organic Framework Particles by Atomic Layer Deposition Induction and Its Application for Ultra-Sensitive Dopamine Sensor

Zhe Zhao,Ye Kong,Gaoshan Huang,Chang Liu,Chunyu You,Zhijia Xiao,Hongqin Zhu,Ji Tan,Borui Xu,Jizhai Cui,Xuanyong Liu,Yongfeng Mei

DOI: https://doi.org/10.1016/j.nantod.2021.101347

IF: 17.4

2021-01-01

Nano Today

Abstract:Weak interactions, non-uniformity and powdery assemblies limit the wide application of metal organic framework (MOF) in devices. Here we report a new strategy for area-selective assembly of MOF particles to prepare a thin film with the assistance of atomic layer deposition (ALD). Self-assembled hierarchically porous Fe-based MOF (PCN-333) films were formed on both flat and complex three-dimensional (3D) substrates by combining gas and liquid fabrication approaches, and can be precisely patterned with photolithography. We demonstrate that the PCN-333 film obtained possesses excellent electrochemical activity and can be applied in dopamine sensing for ultra-high sensitivity of 4637.78 mu A mM(-1) cm(-2) with a wide linear range and a low limit of detection. Moreover, the PCN-333 film composite achieves a function of good selectivity of distinguishing dopamine and ascorbic acid. This strategy is promising to prepare MOF film based on-chip devices with advanced functions. (C) 2021 The Author(s). Published by Elsevier Ltd.
Self-assembled Metal-Organic Frameworks Crystals for Chemical Vapor Sensing.

Chenlong Cui,Yayuan Liu,Hongbo Xu,Shaozhou Li,Weina Zhang,Ping Cui,Fengwei Huo

DOI: https://doi.org/10.1002/smll.201302983

IF: 13.3

2014-01-01

Small

Abstract:A 3D metal-organic frameworks (MOFs) crystals film is obtained via Langmuir-Blodgett technique and used as a photonic sensor for chemical vapor detection. The MOFs crystals film exhibits both acute responses towards various chemical vapors and high controllability in terms of peak intensity and position. The method represents a general, facile and flexible strategy for the fabrication of MOFs-based photonic sensors.
Assembly of Two Mesoporous Anionic Metal-Organic Frameworks for Fluorescent Sensing of Metal Ions and Organic Dyes Separation.

Yu-Hui Luo,A-Di Xie,Ming-Gai Hu,Ji Wu,Dong-En Zhang,Ya-Qian Lan

DOI: https://doi.org/10.1021/acs.inorgchem.0c02760

IF: 4.6

2020-01-01

Inorganic Chemistry

Abstract:Anionic metal-organic frameworks (MOFs) have attracted increasing attention due to the enhanced electrostatic interactions between their anionic frameworks and counter-ionic guests. Owing to these special host-guest interactions, anionic MOFs are beginning to have a large impact in the field of absorption and separation of ionic molecules and selective sensing of metal ions. Herein, two mesoporous anionic metal-organic frameworks, namely, [(CH3)2NH2]6[In6(OX)6(TCA)4]·solvents (JOU-11) and [(CH3)2NH2]6[In6(OX)6(TCPA)4]·solvents (JOU-12) (H3TCA = tricarboxytriphenylamine; H3TCPA = tris((4-carboxyl)phenylduryl)amine; OX = oxalate), have been synthesized by using wheel-type [In6(OX)6(COO)12]6- as building blocks. Structural analyses show that JOU-11 and JOU-12 show isoreticular three-dimensional frameworks with pyr topology. Due to their anionic frameworks and tunable pore window sizes, both compounds can be exploited for absorbing and separating cationic organic dyes. In addition, JOU-11 can be developed as a fluorescence "turn-off" sensor for selectively sensing Fe3+, whereas JOU-12 can be used for fluorescence "turn-on" sensing of Cu2+ and Co2+ ions.
A Series of Bis-Pyridyl-bis-amide-modulated Metal–organic Frameworks: Formation, Transformation and Selectivity for the Efficient Detection of Multiple Analytes

Xiao-Sa Zhang,Yan Liu,Yu Liu,Lin-Jiu Xiao,Jia-Liang Cui,Hong Xiang,Jian Luan,Wen-Ze Li

DOI: https://doi.org/10.1039/d2ce00915c

IF: 3.756

2022-01-01

CrystEngComm

Abstract:A series of LMOFs have been structurally characterized, which display a remarkable fluorescence behavior and can be used as outstanding candidates in the selective sensing of multiple analytes with low limits of detection.
A metal–organic framework constructed by a viologen-derived ligand: photochromism and discernible detection of volatile amine vapors

Zhen-Peng Dong,Jiao-Jiao Zhao,Peng-Yu Liu,Zhi-Liang Liu,Yan-Qin Wang

DOI: https://doi.org/10.1039/c9nj01380f

IF: 3.3

2019-01-01

New Journal of Chemistry

Abstract:The detection of volatile amines has attracted great attention due to their high toxicity and widespread existence. Herein, we report a new example of a metal-organic framework (Co-MOF-1) for the discriminative detection of alkylamines. Co-MOF-1 that was assembled by Co(ii), N-3(-) and viologen-based ligand [H2L]Cl-2 ([1,1-bis(4-carboxylatobenzyl)-4,4-bipyridinium] dichloride) is a 3D cationic pcu framework with 1D channels containing electron-deficient viologen units, exhibits typical electrochemical redox properties and photochromic properties, and is involved in the radical formation via photoinduced electron transfer from nitrate ions and carboxylate groups in the channels to viologen moieties. More importantly, Co-MOF-1 shows different color responses to different volatile amine vapors of different types and molecular sizes, which is attributed to the electron transfer from the amine to viologen. Moreover, the reason why Co-MOF-1 can detect amines distinguishably is the different sizes of the substituents of the amine molecules and the number of N-H bonds of the amine molecules. Furthermore, the portable test paper was successfully prepared and provided a convenient and discernible detection of volatile amine vapors by depositing Co-MOF-1 onto the filter paper, which can also be used as an erasable inkless printing medium.
A multifunctional chemical sensor based on a three-dimensional lanthanide metal-organic framework

Pei-Yao Du,Shengyun Liao,Wen Gu,Xin Liu

DOI: https://doi.org/10.1016/j.jssc.2016.09.011

IF: 3.3

2016-01-01

Journal of Solid State Chemistry

Abstract:A 3D lanthanide MOF with formula [Sm2(abtc)1.5(H2O)3(DMA)]·H2O·DMA (1) has been successfully synthesized via solvothermal method. Luminescence studies reveal that 1 exhibits dual functional detection benzyl alcohol and benzaldehyde among different aromatic molecules. In addition, 1 displays a turn-on luminescence sensing with respect to ethanol among different alcohol molecules, which suggests that 1 is also a promising luminescent probe for high selective sensing of ethanol.
High Performance Hollow Metal–Organic Framework Nanoshell‐Based Etalons for Volatile Organic Compounds Detection

Cheng Li,Limei Li,Shimo Yu,Xiuling Jiao,Dairong Chen

DOI: https://doi.org/10.1002/admt.201600127

IF: 6.8

2016-01-01

Advanced Materials Technologies

Abstract:A novel high performance optical metal–organic framework (MOF) sensor is presented by means of hollow MOF nanoshell‐based etalon (HMNSE), which allows for selective volatile organic compound (VOC) detection with distinct color output and high efficiency of optical transduction. The HMNSE is constructed by integrating hollow MOF nanoshell arrays between the reflective surfaces of silicon wafer and metal layer, and features ultrathin shell thickness (<100 nm) and macropores within a submicron thin film, which provides appropriate optical thickness, tunable interference color, and fast mass transport all at one time. Due to the rational design of optical motif, the HMNSE has attained the largest optical response so far for ultrathin MOF toward VOC detection. Selective detection on vapor phase alcohols, ketones, nitriles, cyclohexane/benzene, and xylene isomers has been exhibited, which reflected well the characteristic effect of size exclusion and chemical interaction between the MOF and VOCs. The synergistic combination of enhanced reflectance peak and optical shift has led to visible color change with unprecedented high saturation upon VOC exposure. Wide dynamic range, ultrafast kinetics, and excellent reversibility and stability have also been achieved, rendering HMNSE promising for low‐cost, real‐time, and on‐site detection.
Facile Fabrication of Ultrathin Metal–Organic Framework-Coated Monolayer Colloidal Crystals for Highly Efficient Vapor Sensing

Limei Li,Xiuling Jiao,Dairong Chen,Bettina V. Lotsch,Cheng Li

DOI: https://doi.org/10.1021/acs.chemmater.5b02476

IF: 10.508

2015-01-01

Chemistry of Materials

Abstract:The sorption properties and structural versatility of metal organic frameworks (MOFs) make them superior chemical sensing materials with both high sensitivity and selectivity, but the fabrication of MOF sensors with optimized performances still remains a major challenge. Herein, we propose a simple yet powerful optical sensing motif based on ultrathin MOF-coated monolayer colloidal crystals (MCCs), which allows for high efficiency in vapor sensing through changes in their effective refractive index (RI). Two optical modes exist in this sensor, namely, photonic eigenmodes and Fabry-Perot oscillations, both of which can be used as the signal transducer. Selective response to a series of alcohols, water, and acetonitrile was exhibited, reflecting well the characteristic sorption properties of the integrated MOF, with which colorimetric reporting was readily achieved. Linear response to a broad dynamic range of vapor concentration was realized. The sensitivity was found to depend closely on the thickness of the MOP coating and can be further enhanced accordingly. Ultrafast response time (<5 s) and excellent recyclability were also demonstrated. These substantial improvements in performance are attributed to the efficacy of signal transduction and the enhanced pore accessibility and diffusion efficiency, which are intrinsically endowed by the optical motif design. Our findings should provide new insights into the design and fabrication of MOP sensors toward real-world applications.
Metal-Organic Framework Coated Devices for Gas Sensing

Xiaoyan Peng,Xuanhao Wu,Mingming Zhang,Hongye Yuan

DOI: https://doi.org/10.1021/acssensors.3c00362

IF: 8.9

2023-06-28

ACS Sensors

Abstract:The demand for monitoring chemical and physical information surrounding, air quality, and disease diagnosis has propelled the development of devices for gas sensing that are capable of translating external stimuli into detectable signals. Metal-organic frameworks (MOFs), possessing particular physiochemical properties with designability in topology, specific surface area, pore size and/or geometry, potential functionalization, and host-guest interactions, reveal excellent development promises...

chemistry, multidisciplinary, analytical,nanoscience & nanotechnology
Design and Sensing Applications of Metal–organic Framework Composites

Jianping Lei,Ruocan Qian,Pinghua Ling,Lin Cui,Huangxian Ju

DOI: https://doi.org/10.1016/j.trac.2014.02.012

IF: 14.908

2014-01-01

TrAC Trends in Analytical Chemistry

Abstract:As crystalline molecular materials, metal–organic frameworks (MOFs) have unique chemical and physical properties, such as ultrahigh porosity, tunable structure, and high thermal and chemical stability. These characteristics make MOFs suitable for use in gas storage, separation, catalysis, biomedical imaging and sensing. Precise chemical modifications can especially endow MOFs with specific functions and offer the possibility of designing a new generation of sensing devices. This article focuses on the design of functional MOFs and signal-transduction strategy, including optical, electrochemical, mechanical, and photoelectrochemical schemes, for analytical applications in detection of solvent molecules, metal ions, DNA, proteins, and other important biomolecules.
Layer-by-Layer Assembled Conductive Metal-Organic Framework Nanofilms for Room-Temperature Chemiresistive Sensing

Ming-Shui Yao,Xiao-Jing Lv,Zhi-Hua Fu,Wen-Hua Li,Wei-Hua Deng,Guo-Dong Wu,Gang Xu

DOI: https://doi.org/10.1002/anie.201709558

2017-01-01

Angewandte Chemie International Edition

Abstract:The utility of electronically conductive metal-organic frameworks (EC-MOFs) in high-performance devices has been limited to date by a lack of high-quality thin film. The controllable thin-film fabrication of an EC-MOF, Cu3 (HHTP)2 , (HHTP=2,3,6,7,10,11-hexahydroxytriphenylene), by a spray layer-by-layer liquid-phase epitaxial method is reported. The Cu3 (HHTP)2 thin film can not only be precisely prepared with thickness increment of about 2 nm per growing cycle, but also shows a smooth surface, good crystallinity, and high orientation. The chemiresistor gas sensor based on this high-quality thin film is one of the best room-temperature sensors for NH3 among all reported sensors based on various materials.
An Amine-Functionalized Metal-Organic Framework As a Sensing Platform for DNA Detection.

Hao-Tian Zhang,Jian-Wei Zhang,Gang Huang,Zi-Yi Du,Hai-Long Jiang

DOI: https://doi.org/10.1039/c4cc05571c

IF: 4.9

2014-01-01

Chemical Communications

Abstract:An amine-functionalized metal-organic framework (MOF) has been employed as an effective fluorescent sensing platform for DNA detection and is capable of distinguishing complementary and mismatched target sequences with high sensitivity and selectivity.
Design and Application of Electrochemical Sensors with Metal–Organic Frameworks as the Electrode Materials or Signal Tags

Yong Chang,Jiaxin Lou,Luyao Yang,Miaomiao Liu,Ning Xia,Lin Liu

DOI: https://doi.org/10.3390/nano12183248

IF: 5.3

2022-09-19

Nanomaterials

Abstract:Metal–organic frameworks (MOFs) with fascinating chemical and physical properties have attracted immense interest from researchers regarding the construction of electrochemical sensors. In this work, we review the most recent advancements of MOF−based electrochemical sensors for the detection of electroactive small molecules and biological macromolecules (e.g., DNA, proteins, and enzymes). The types and functions of MOF−based nanomaterials in terms of the design of electrochemical sensors are also discussed. Furthermore, the limitations and challenges of MOF−based electrochemical sensing devices are explored. This work should be invaluable for the development of MOF−based advanced sensing platforms.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Two-Dimensional Metal-Organic Framework With Wide Channels And Responsive Turn-On Fluorescence For The Chemical Sensing Of Volatile Organic Compounds

Mei Zhang,Guangxue Feng,Zhegang Song,Yu-Peng Zhou,Hsiu-Yi Chao,Daqiang Yuan,Tristan T Y Tan,Zhengang Guo,Zhigang Hu,Ben Zhong Tang,Bin Liu,Dan Zhao

DOI: https://doi.org/10.1021/ja502643p

IF: 15

2014-01-01

Journal of the American Chemical Society

Abstract:We report a 2D layered metal-organic framework (MOF) with wide channels named NUS-1 and its activated analogue NUS-la composed of Zn4O-like secondary building units and tetraphenylethene (TPE)-based ligand 4,4'-(2,2-diphenylethene-1,1-diyl)dibenzoic acid. Due to its special structure, NUS-la exhibits unprecedented gas sorption behavior, glass-transition-like phase transition under cryogenic conditions, and responsive turn-on fluorescence to various volatile organic compounds. Our approach using angular ligand containing partially fixed TPE units paves a way toward highly porous MOFs with fluorescence turn-on response that will find wide applications in chemical sensing.
A Luminescent Metal-Organic Framework Film Fabricated on Porous Al2O3 Substrate for Sensitive Detecting Ammonia

Jun Zhang,Dan Yue,Tifeng Xia,Yuanjing Cui,Yu Yang,Guodong Qian

DOI: https://doi.org/10.1016/j.micromeso.2017.06.053

IF: 5.876

2017-01-01

Microporous and Mesoporous Materials

Abstract:A novel metal-organic framework film MIL-124 film was prepared on porous (alpha-Al2O3 ceramic plate by in situ synthesizing. After introducing Eu3+ ions to the free -COOH sites of the MIL-124 ligand channels, a luminescent MOF film MIL-124@Eu3+ was obtained. Based on the chemical reaction between NH3 and the -COOH, the formation of -COONH4 which was demonstrated by FT-IR spectrum, affected the energy transfer between Eu3+ ions and ligand, quenching the characteristic emission of MIL-124@Eu3+ film. The limit of detection to ammonia was calculated as 26.2 ppm in ambient air. The XRD results demonstrated the long-term stability of this ammonia sensor. The excellent performance and economical synthesizing strategy of the MIL-124@Eu3+ film exhibited potential application of this sensor for detecting ammonia gas. (C) 2017 Elsevier Inc. All rights reserved.
A Novel Cu-metal-organic Framework with Two-Dimensional Layered Topology for Electrochemical Detection Using Flexible Sensors.

Wei Ling,Yafeng Hao,Hanjie Wang,Hang Xu,Xian Huang

DOI: https://doi.org/10.1088/1361-6528/ab30b6

IF: 3.5

2019-01-01

Nanotechnology

Abstract:We present a novel Cu-metal-organic framework (MOF) with two-dimensional layered topology and techniques to integrate it with flexible sensors for electrochemical detection. The unique Cu-MOF is formed by coordinating Cu2+ ions with carboxylic oxygen groups, resulting in layered structures interlayerly connected by hydrogen bonds. The resulting flexible sensors exhibit capability in detecting ascorbic acid (AA), hydrogen peroxide (H2O2) and L-Histidine (L-His) with detection limits of 2.94, 4.1 and 5.3 μM, respectively. The linear ranges of the sensors compare favorably with other sensors based on rigid platforms that offer similar sensitivity. According to the result of cytotoxicity study, the MOFs-modified flexible sensors exhibit good biocompatibility to cells, suggesting potential use in in vivo chemical detection. The results presented here demonstrate applications of MOFs in facilitating highly stable electrochemical detection in flexible electronics, and provide fundamental knowledge about structure-dependent electrochemical properties of MOFs and changing behaviors of flexible MOFs membranes under external strain. More MOFs-based flexible sensors may be developed to explore different properties of MOFs by varying their compositions and structures for healthcare and clinic applications.

An Electrochemically Deposited Ordered Hierarchical Metal–organic Framework-Based Dual-Module Sensor for Decoding Organic Vapors

Metal‐Organic Frameworks‐Derived Porous In2O3 Hollow Nanorod for High‐Performance Ethanol Gas Sensor

Facile Fabrication of a Multifunctional Metal-Organic Framework-based Sensor Exhibiting Exclusive Solvochromic Behaviors Toward Ketone Molecules

Highly Selective and Sensitive Detection of Volatile Sulfur Compounds by Ionically Conductive Metal-Organic Frameworks

A Single Bimetallic Lanthanide-Based Metal-Organic Frameworks for Visual Decoding of a Broad Spectrum of Molecules.

Area-selective and Precise Assembly of Metal Organic Framework Particles by Atomic Layer Deposition Induction and Its Application for Ultra-Sensitive Dopamine Sensor

Self-assembled Metal-Organic Frameworks Crystals for Chemical Vapor Sensing.

Assembly of Two Mesoporous Anionic Metal-Organic Frameworks for Fluorescent Sensing of Metal Ions and Organic Dyes Separation.

A Series of Bis-Pyridyl-bis-amide-modulated Metal–organic Frameworks: Formation, Transformation and Selectivity for the Efficient Detection of Multiple Analytes

A metal–organic framework constructed by a viologen-derived ligand: photochromism and discernible detection of volatile amine vapors

A multifunctional chemical sensor based on a three-dimensional lanthanide metal-organic framework

High Performance Hollow Metal–Organic Framework Nanoshell‐Based Etalons for Volatile Organic Compounds Detection

Facile Fabrication of Ultrathin Metal–Organic Framework-Coated Monolayer Colloidal Crystals for Highly Efficient Vapor Sensing

Metal-Organic Framework Coated Devices for Gas Sensing

Design and Sensing Applications of Metal–organic Framework Composites

Layer-by-Layer Assembled Conductive Metal-Organic Framework Nanofilms for Room-Temperature Chemiresistive Sensing

An Amine-Functionalized Metal-Organic Framework As a Sensing Platform for DNA Detection.

Design and Application of Electrochemical Sensors with Metal–Organic Frameworks as the Electrode Materials or Signal Tags

Two-Dimensional Metal-Organic Framework With Wide Channels And Responsive Turn-On Fluorescence For The Chemical Sensing Of Volatile Organic Compounds

A Luminescent Metal-Organic Framework Film Fabricated on Porous Al2O3 Substrate for Sensitive Detecting Ammonia

A Novel Cu-metal-organic Framework with Two-Dimensional Layered Topology for Electrochemical Detection Using Flexible Sensors.